User Guide - Redrock Micro
STEP 1
STEP 2
STEP 3
STEP 4
ATTACH HINGE TO MATTE BOX LINE UP HINGE WITH SLOTS AND TIGHTEN WITH THUMB SCREWS YOU MAY LATER LOOSEN FOR VERTICAL ADJUSTMENT
ATTACH SWING ARM TO HINGE LINE UP SWING ARM WITH 4" RODS (NOTE ORIENTATION OF ARM) LOOSEN KNOB SO THAT RODS SLIDE ONTO SWING ARM TIGHTEN KNOB TO LOCK DOWN MATTEBOX YOU MAY LOOSEN LATER FOR FRONT/BACK ADJUSTMENT
ATTACH SIDE FLAGS TO SIDE FLAG RODS LOOSEN ROD THUMBSCREWS AND LINE UP TAB ON FLAG WITH SLOT IN RODS. INSERT AND TIGHTEN DOWN. MAKE SURE THAT THE PLASTIC GUIDES ARE ON THE OUTSIDE. YOU MAY LOOSEN THE FLAG THUMB SCREW TO ADJUST THE SIDE FLAGS
ATTACH TOP EYEBROW TO TOP EYEBROW ROD LOOSEN BOTH ROD THUMBSCREWS AND LINE UP TAB ON EYEBROW WITH FLAT ON TOP OF ROD. INSERT AND TIGHTEN DOWN. MAKE SURE THAT "REDROCK" FACES OUTWARD.
TIGHTEN TO LOCK DOWN TOP FLAG
LOOSEN TO SLIDE TIGHTEN TO LOCK
LOOSEN TO ADJUST ANGLE OF EYEBROW. TIGHTEN TO LOCK
THIS WAY
LOOSEN FOR VERTICAL ADJUSTMENT
STEP 5 ATTACH MATTEBOX TO IRIS RODS LINE UP SWING ARM WITH IRIS RODS. LOOSEN KNOBS ON SWING ARM SO THAT RODS SLIDE INTO SWING ARM TIGHTEN KNOB TO LOCK DOWN MATTEBOX
NOT THIS WAY
LOOSEN TO INSERT SIDE FLAGS
LOOSEN TO ADJUST MOVEABLE SIDE FLAG
STEP 6
STEP 7
TO SWING MATTEBOX OPEN, PULL UP ON HINGE PLUNGER AND SWING MATTEBOX OPEN. TO CLOSE, SWING MATTEBOX CLOSED, THE PLUNGER WILL RISE UP AND LOCK IN PLACE BY ITSELF.
INSTALL DESIRED DONUT. DEPENDING ON YOUR LENS, INSTALL EITHER THE 2", 2 1/2", 3" OR 4" DONUT. FIT THE DONUT JUST INSIDE THE REAR OPENING, RETAINED BY THE (8) TABS. SWING MATTE BOX OPEN
PULL UP TO RELEASE SWING AWAY
LOOSEN TO SLIDE TIGHTEN TO LOCK FILTER FRAME PULL UP FILTER LATCH TO INSERT GLASS FILTER
FILTER LOCKS AND STAGE LOCKS
Thank you for purchasing the microMatteBox. We sincerely hope it exceeds your expectations for price/performance in cinema-grade accessories.
4" X 4" FILTER MASK REMOVE FOR 4 X 5.65" FILTERS
Getting started with your new microMatteBox
FILTER TRAY LOCKS TIGHTEN TO LOCK FILTER TRAY LOOSEN TO UNLOCK FILTER TRAY (TOP) STAGE ROTATION LOCKS LOOSEN TO ROTATE STAGE TIGHTEN TO LOCK STAGE (BOTTOM)
We have created a central resource for tutorials, help, and community to help you get the most out of your microMatteBox. Please visit
http://start.redrockmicro.com
Tutorials, forums, customer support
STEP 2
STEP 3
STEP 4
ATTACH HINGE TO MATTE BOX LINE UP HINGE WITH SLOTS AND TIGHTEN WITH THUMB SCREWS YOU MAY LATER LOOSEN FOR VERTICAL ADJUSTMENT
ATTACH SWING ARM TO HINGE LINE UP SWING ARM WITH 4" RODS (NOTE ORIENTATION OF ARM) LOOSEN KNOB SO THAT RODS SLIDE ONTO SWING ARM TIGHTEN KNOB TO LOCK DOWN MATTEBOX YOU MAY LOOSEN LATER FOR FRONT/BACK ADJUSTMENT
ATTACH SIDE FLAGS TO SIDE FLAG RODS LOOSEN ROD THUMBSCREWS AND LINE UP TAB ON FLAG WITH SLOT IN RODS. INSERT AND TIGHTEN DOWN. MAKE SURE THAT THE PLASTIC GUIDES ARE ON THE OUTSIDE. YOU MAY LOOSEN THE FLAG THUMB SCREW TO ADJUST THE SIDE FLAGS
ATTACH TOP EYEBROW TO TOP EYEBROW ROD LOOSEN BOTH ROD THUMBSCREWS AND LINE UP TAB ON EYEBROW WITH FLAT ON TOP OF ROD. INSERT AND TIGHTEN DOWN. MAKE SURE THAT "REDROCK" FACES OUTWARD.
TIGHTEN TO LOCK DOWN TOP FLAG
LOOSEN TO SLIDE TIGHTEN TO LOCK
LOOSEN TO ADJUST ANGLE OF EYEBROW. TIGHTEN TO LOCK
THIS WAY
LOOSEN FOR VERTICAL ADJUSTMENT
STEP 5 ATTACH MATTEBOX TO IRIS RODS LINE UP SWING ARM WITH IRIS RODS. LOOSEN KNOBS ON SWING ARM SO THAT RODS SLIDE INTO SWING ARM TIGHTEN KNOB TO LOCK DOWN MATTEBOX
NOT THIS WAY
LOOSEN TO INSERT SIDE FLAGS
LOOSEN TO ADJUST MOVEABLE SIDE FLAG
STEP 6
STEP 7
TO SWING MATTEBOX OPEN, PULL UP ON HINGE PLUNGER AND SWING MATTEBOX OPEN. TO CLOSE, SWING MATTEBOX CLOSED, THE PLUNGER WILL RISE UP AND LOCK IN PLACE BY ITSELF.
INSTALL DESIRED DONUT. DEPENDING ON YOUR LENS, INSTALL EITHER THE 2", 2 1/2", 3" OR 4" DONUT. FIT THE DONUT JUST INSIDE THE REAR OPENING, RETAINED BY THE (8) TABS. SWING MATTE BOX OPEN
PULL UP TO RELEASE SWING AWAY
LOOSEN TO SLIDE TIGHTEN TO LOCK FILTER FRAME PULL UP FILTER LATCH TO INSERT GLASS FILTER
FILTER LOCKS AND STAGE LOCKS
Thank you for purchasing the microMatteBox. We sincerely hope it exceeds your expectations for price/performance in cinema-grade accessories.
4" X 4" FILTER MASK REMOVE FOR 4 X 5.65" FILTERS
Getting started with your new microMatteBox
FILTER TRAY LOCKS TIGHTEN TO LOCK FILTER TRAY LOOSEN TO UNLOCK FILTER TRAY (TOP) STAGE ROTATION LOCKS LOOSEN TO ROTATE STAGE TIGHTEN TO LOCK STAGE (BOTTOM)
We have created a central resource for tutorials, help, and community to help you get the most out of your microMatteBox. Please visit
http://start.redrockmicro.com
Tutorials, forums, customer support
