Utility Electric Water Heater
Utility Electric Water Heater The Utility Electric Models Feature: Bradford White is ISO registered to the 9001-2008 standard. ■ UL-174 and IEC Certified. ■ Fully Automatic Thermostat Controls—Fast acting surface-mount
thermostat with high limit energy cut-off (manual reset) for safety. ■ Direct Heat Transfer With a Single Immersed Element—Transfers heat
directly and efficiently to the water. Screw-in style element. ■ Vitraglas® Lining—An exclusively engineered enamel formula that provides
■
■
■ ■ ■ ■ ■
superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600°F (871°C). Insulation System—1" (25mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity. Water Connections—3⁄4" (19mm) NPT factory-supplied true dielectric fittings extend water heater life. Located on the side for easier installation (Fittings packaged separately inside carton). Protective Magnesium Anode Rod—Provides added protection against corrosion for long-term, trouble-free service. Voltages Available—120V, 208V, 240V, 277V, 480V. Single Phase Operation Only. T&P Relief Valve Included—All models have special tapping on side of tank. Suitable for residential and light duty commercial applications.
Photo is of M-I-12UT6SS
Copper Screw Type Immersion Element
(INCOLOY© type immersion element available upon request)
Residential Warranty: 6 or 10 Year Limited Tank Warranty / 1 Year Parts Warranty. Commercial Warranty: 3 or 5 Year Limited Tank Warranty / 1 Year Parts Warranty. For more information on warranty, please visit www.bradfordwhite.com
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas® is a registered trademark of Bradford White® Corporation.
EX204-0917
Utility Electric Water Heater Capacity
Model Number
M-I-6U6SS M-I-10U6SS M-I-12UT6SS M-I-15U6SS M-I-20U6SS M-I-30U6SS
U.S. Gal.
Imp. Gal.
U.S.* GPH
Imp.* GPH
6 10 12 15 19 30
5 8 10 13 16 25
7 7 7 7 7 7
6 6 6 6 6 6
Capacity
Model Number
Recovery 90°F Rise
Recovery 50°C Rise Liters/* Hour
Liters
26 26 26 26 26 26
23 38 45 57 72 114
M-I-6U6SS M-I-10U6SS M-I-12UT6SS M-I-15U6SS M-I-20U6SS M-I-30U6SS
A Floor to Heater Top
B Jacket Dia.
C Floor to Hot Water Conn.
D Floor to T&P Conn.
E Floor to Cold Water Conn.
in.
in.
in.
in.
in.
in.
lbs.
14 16 14 18 18 20
10 1/8 15 21 1/8 17 3/4 18 1/4 231/4
101/8 14 211/8 163/4 181/4 231/4
31/8 511/16 3 61/8 3 43/8
161/2 911/16 161/2 101/8 101/4 30
161/2 12 167/8 1211/16 243/4 30
33 48 48 55 59 82
A Floor to Heater Top
B Jacket Dia.
C Floor to Hot Water Conn.
D Floor to T&P Conn.
E Floor to Cold Water Conn.
F Floor to Anode Rod
G Floor to Electrical Access
Approx. Shipping Weight
mm.
mm.
mm.
mm.
mm.
mm.
mm.
kg.
419 444 756 514 629 756
356 404 356 457 457 508
257 381 537 451 464 591
257 355 537 425 464 591
79 144 76 155 76 111
444 246 439 257 464 762
419 305 429 309 628 762
15 22 22 25 27 37
F
A G
G
A F C
D
E E
6, 12, 20 & 30 Gallon Models
Wattage 1500W 2000W 2500W 3000W 3500W 4000W 4500W 5000W 5500W 6000W
B
10 & 15 Gallon Models
Approx. Shipping Weight
in.
B
F
G Floor to Electrical Access
16 1/2 17 1/2 27 3/4 20 1/4 24 3/4 29 3/4
The Utility Water Heaters will be wired 120 volt with (1) 1500 watt element, unless otherwise specified. Maximum wattage for 120V is 3000W. Maximum wattage for 6 and 12 gallon utility models is 3000W, regardless of voltage. Maximum wattage for 10,15, 20 and 30 gallon utility models is 6000W.
C D
F Floor to Anode Rod
Recovery GPH Temperature Rise °F 60 80 90 100 120 10 14 17 21 24 28 31 34 38 41
8 10 13 15 18 21 23 26 29 31
7 9 11 14 16 18 21 23 25 28
6 8 10 12 14 16 19 21 23 25
Voltage Wattage Limitations 120V 208V 240V 277V yes yes yes yes 1500W 2000W yes yes yes yes yes yes yes yes 2500W 3000W yes yes yes yes 3500W no yes yes no 4000W no yes yes yes 4500W no yes yes yes 5000W no yes yes yes 5500W no yes yes no 6000W no yes yes yes
5 7 9 10 12 14 15 17 19 21
480V yes yes yes yes no yes yes yes no yes
General All models ETL listed. These heaters are wired 120V with one 1500W element, unless otherwise specified. All water and electrical connections are 3/4" (19mm) NPT. All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa). Applicable models CSA verified for energy performance in accordance with C191.1-M90. Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. Suitable for Water (Potable) Heating and Space Heating. Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
Ambler, PA
Telephone: 215-641-9400 l Email: [email protected] / www.bradfordwhite.com EX204-0917
©2017, Bradford White Corporation. All rights reserved.
Printed in U.S.A.
thermostat with high limit energy cut-off (manual reset) for safety. ■ Direct Heat Transfer With a Single Immersed Element—Transfers heat
directly and efficiently to the water. Screw-in style element. ■ Vitraglas® Lining—An exclusively engineered enamel formula that provides
■
■
■ ■ ■ ■ ■
superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600°F (871°C). Insulation System—1" (25mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity. Water Connections—3⁄4" (19mm) NPT factory-supplied true dielectric fittings extend water heater life. Located on the side for easier installation (Fittings packaged separately inside carton). Protective Magnesium Anode Rod—Provides added protection against corrosion for long-term, trouble-free service. Voltages Available—120V, 208V, 240V, 277V, 480V. Single Phase Operation Only. T&P Relief Valve Included—All models have special tapping on side of tank. Suitable for residential and light duty commercial applications.
Photo is of M-I-12UT6SS
Copper Screw Type Immersion Element
(INCOLOY© type immersion element available upon request)
Residential Warranty: 6 or 10 Year Limited Tank Warranty / 1 Year Parts Warranty. Commercial Warranty: 3 or 5 Year Limited Tank Warranty / 1 Year Parts Warranty. For more information on warranty, please visit www.bradfordwhite.com
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas® is a registered trademark of Bradford White® Corporation.
EX204-0917
Utility Electric Water Heater Capacity
Model Number
M-I-6U6SS M-I-10U6SS M-I-12UT6SS M-I-15U6SS M-I-20U6SS M-I-30U6SS
U.S. Gal.
Imp. Gal.
U.S.* GPH
Imp.* GPH
6 10 12 15 19 30
5 8 10 13 16 25
7 7 7 7 7 7
6 6 6 6 6 6
Capacity
Model Number
Recovery 90°F Rise
Recovery 50°C Rise Liters/* Hour
Liters
26 26 26 26 26 26
23 38 45 57 72 114
M-I-6U6SS M-I-10U6SS M-I-12UT6SS M-I-15U6SS M-I-20U6SS M-I-30U6SS
A Floor to Heater Top
B Jacket Dia.
C Floor to Hot Water Conn.
D Floor to T&P Conn.
E Floor to Cold Water Conn.
in.
in.
in.
in.
in.
in.
lbs.
14 16 14 18 18 20
10 1/8 15 21 1/8 17 3/4 18 1/4 231/4
101/8 14 211/8 163/4 181/4 231/4
31/8 511/16 3 61/8 3 43/8
161/2 911/16 161/2 101/8 101/4 30
161/2 12 167/8 1211/16 243/4 30
33 48 48 55 59 82
A Floor to Heater Top
B Jacket Dia.
C Floor to Hot Water Conn.
D Floor to T&P Conn.
E Floor to Cold Water Conn.
F Floor to Anode Rod
G Floor to Electrical Access
Approx. Shipping Weight
mm.
mm.
mm.
mm.
mm.
mm.
mm.
kg.
419 444 756 514 629 756
356 404 356 457 457 508
257 381 537 451 464 591
257 355 537 425 464 591
79 144 76 155 76 111
444 246 439 257 464 762
419 305 429 309 628 762
15 22 22 25 27 37
F
A G
G
A F C
D
E E
6, 12, 20 & 30 Gallon Models
Wattage 1500W 2000W 2500W 3000W 3500W 4000W 4500W 5000W 5500W 6000W
B
10 & 15 Gallon Models
Approx. Shipping Weight
in.
B
F
G Floor to Electrical Access
16 1/2 17 1/2 27 3/4 20 1/4 24 3/4 29 3/4
The Utility Water Heaters will be wired 120 volt with (1) 1500 watt element, unless otherwise specified. Maximum wattage for 120V is 3000W. Maximum wattage for 6 and 12 gallon utility models is 3000W, regardless of voltage. Maximum wattage for 10,15, 20 and 30 gallon utility models is 6000W.
C D
F Floor to Anode Rod
Recovery GPH Temperature Rise °F 60 80 90 100 120 10 14 17 21 24 28 31 34 38 41
8 10 13 15 18 21 23 26 29 31
7 9 11 14 16 18 21 23 25 28
6 8 10 12 14 16 19 21 23 25
Voltage Wattage Limitations 120V 208V 240V 277V yes yes yes yes 1500W 2000W yes yes yes yes yes yes yes yes 2500W 3000W yes yes yes yes 3500W no yes yes no 4000W no yes yes yes 4500W no yes yes yes 5000W no yes yes yes 5500W no yes yes no 6000W no yes yes yes
5 7 9 10 12 14 15 17 19 21
480V yes yes yes yes no yes yes yes no yes
General All models ETL listed. These heaters are wired 120V with one 1500W element, unless otherwise specified. All water and electrical connections are 3/4" (19mm) NPT. All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa). Applicable models CSA verified for energy performance in accordance with C191.1-M90. Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. Suitable for Water (Potable) Heating and Space Heating. Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
Ambler, PA
Telephone: 215-641-9400 l Email: [email protected] / www.bradfordwhite.com EX204-0917
©2017, Bradford White Corporation. All rights reserved.
Printed in U.S.A.
