valenciatm 1856
VALENCIATM 1856 End Table
bdiusa.com [email protected]
Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.com/product-registration/ Placement and Maintenance Valencia™ is designed for indoor use on level floors. Clean glass with glass cleaner and metal surfaces with a moist cloth. Your Valencia™ End Table is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product. Step 1 Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at: [email protected]. For all other concerns, please contact your BDI retailer.
T1- 4mm Hex Wrench x 2
H1 12mm Flat head Screw x 6
H2 Threaded steel spacer x 3
H3 Light gray bumper x 4
C3 Glass Top x 1
C1 Large Frame x 1
C2 Small Frame x 1
Designed by Louis A. Lara. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Valencia & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI Made in China. 07.07.2017 v2
Step 2 - Attach the 2 frames Orient the large and small frames as shown with the curved edges facing down (on a carpet or padded surface). With 1 hand, position a threaded steel spacer in the inside counterbore hole and with the other hand thread a flat head screw through the outside and into the spacer. Repeat for all 3 spacers. Attach remaining 3 screws through the other frame and into the other end of the spacers. Tighten all 6 screws using both hex wrenchs.
H2 x 3
H1 x 6
C1
H1 H2 H1
C2
T1
Step 3 - Install bumpers Install the light gray bumpers in the upper holes of the table frame as shown.
H3 Light Gray bumper x 4
2
VALENCIA 1856 END TABLE
bdiusa.com [email protected]
Step 4 - Install glass top With help from another person, position your Valencia end table frame where you want it. Position the glass top on top of the frame and center so that it overhanges equally on all sides. C3 Glass Top x 1
2 Person Task
Correct
Top View
3
VALENCIA 1856 END TABLE
bdiusa.com [email protected]
bdiusa.com [email protected]
Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.com/product-registration/ Placement and Maintenance Valencia™ is designed for indoor use on level floors. Clean glass with glass cleaner and metal surfaces with a moist cloth. Your Valencia™ End Table is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product. Step 1 Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at: [email protected]. For all other concerns, please contact your BDI retailer.
T1- 4mm Hex Wrench x 2
H1 12mm Flat head Screw x 6
H2 Threaded steel spacer x 3
H3 Light gray bumper x 4
C3 Glass Top x 1
C1 Large Frame x 1
C2 Small Frame x 1
Designed by Louis A. Lara. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Valencia & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI Made in China. 07.07.2017 v2
Step 2 - Attach the 2 frames Orient the large and small frames as shown with the curved edges facing down (on a carpet or padded surface). With 1 hand, position a threaded steel spacer in the inside counterbore hole and with the other hand thread a flat head screw through the outside and into the spacer. Repeat for all 3 spacers. Attach remaining 3 screws through the other frame and into the other end of the spacers. Tighten all 6 screws using both hex wrenchs.
H2 x 3
H1 x 6
C1
H1 H2 H1
C2
T1
Step 3 - Install bumpers Install the light gray bumpers in the upper holes of the table frame as shown.
H3 Light Gray bumper x 4
2
VALENCIA 1856 END TABLE
bdiusa.com [email protected]
Step 4 - Install glass top With help from another person, position your Valencia end table frame where you want it. Position the glass top on top of the frame and center so that it overhanges equally on all sides. C3 Glass Top x 1
2 Person Task
Correct
Top View
3
VALENCIA 1856 END TABLE
bdiusa.com [email protected]
