ver 250
DEFAULT WINDOWS LOGIN Username: TRMS Password: trms
PLAYER 250 QUICK START GUIDE CAR-250 (WINDOWS SMALL FORM FACTOR)
IN THE BOX
UNIT CONNECTIONS
• • • • • •
1. 2. 3. 4. 5. 6. 7. 8. 9.
Carousel Player Power Supply VESA Mounting Brackets DVI-to-VGA Adaptor DVI-to-HDMI Cable Wi-Fi Antenna (if ordered)
Power DVI Out DisplayPort Out Serial (RS-232) Network USB 3.0 Wi-Fi Antenna (optional) Line Out Mic In
4 1
2
3
7 5
6
8 9
INITIAL SETUP & CONFIGURAITON
1 STEP ONE Connect audio/video, keyboard/mouse & network, then power. Boot system using the power button.
3 STEP THREE Set Network Location in Windows to “Work” and configure either a Reserved DHCP or Static IP address.
7 STEP SEVEN For Server, enter the IP address of the Carousel Server on the network.
2 STEP TWO Upon startup, the Carousel Display Engine will load. Click Cancel to halt the process.
4 STEP FOUR
5 STEP FIVE
Adjust the screen resolution and orientation in Windows to the desired settings.
6 STEP SIX
Set the correct time-zone in Windows, then restart the unit.
This time when the splash-screen loads, press Configure.
10 STEP TEN
11 STEP ELEVEN
Press Save and let the Display Engine load. Check to make sure all Zones load content.
To stop the Display Engine and return to Windows press and hold [ESC].
8 STEP EIGHT Press the checkmark to run a connection test. If any items fail, check the results box for solutions.
9 STEP NINE After a successful connection test, return to the configuration window and select a Channel for display.
YOUR STORY PLAYS HERE +1 612-866-4118
www.trms.com/support
PLAYER 250 QUICK START GUIDE CAR-250 (WINDOWS SMALL FORM FACTOR)
IN THE BOX
UNIT CONNECTIONS
• • • • • •
1. 2. 3. 4. 5. 6. 7. 8. 9.
Carousel Player Power Supply VESA Mounting Brackets DVI-to-VGA Adaptor DVI-to-HDMI Cable Wi-Fi Antenna (if ordered)
Power DVI Out DisplayPort Out Serial (RS-232) Network USB 3.0 Wi-Fi Antenna (optional) Line Out Mic In
4 1
2
3
7 5
6
8 9
INITIAL SETUP & CONFIGURAITON
1 STEP ONE Connect audio/video, keyboard/mouse & network, then power. Boot system using the power button.
3 STEP THREE Set Network Location in Windows to “Work” and configure either a Reserved DHCP or Static IP address.
7 STEP SEVEN For Server, enter the IP address of the Carousel Server on the network.
2 STEP TWO Upon startup, the Carousel Display Engine will load. Click Cancel to halt the process.
4 STEP FOUR
5 STEP FIVE
Adjust the screen resolution and orientation in Windows to the desired settings.
6 STEP SIX
Set the correct time-zone in Windows, then restart the unit.
This time when the splash-screen loads, press Configure.
10 STEP TEN
11 STEP ELEVEN
Press Save and let the Display Engine load. Check to make sure all Zones load content.
To stop the Display Engine and return to Windows press and hold [ESC].
8 STEP EIGHT Press the checkmark to run a connection test. If any items fail, check the results box for solutions.
9 STEP NINE After a successful connection test, return to the configuration window and select a Channel for display.
YOUR STORY PLAYS HERE +1 612-866-4118
www.trms.com/support
