Vertical Discharge Remote Condenser Vertical Discharge Remote C ...
TS-0895 Remote Condenser
Remote, air-cooled condenser system conserves energy and improves beverage cooling efficiency.
Multiplex remote condenser systems effectively dissipate heat at a convenient location, indoors or outdoors, away from the chiller. This maximizes beverage cooling capability and minimizes air conditioning loads by lowering the ambient air temperature at the chiller.
Standard Features • One size for all remote condenser Multiplex chillers. • Vertical discharge remote condenser is available for Multiplex Model 50 and Model 44. Refer to specification sheet for equipment dimensions, production capacities and electrical requirements. • Condenser operation range from -20°F (-29°C) to 120°F (49°C). Can be installed with up to 15" (38.1 cm) of bottom clearance.
ISO 9001:2000 Quality System Certified
2100 Future Drive
Tel: 812.246.7000
Sellersburg, IN 47172 USA
Fax: 812.246.7024
www.manitowocbeverage.com/us
Vertical Discharge Remote Condenser
For Multiplex Chillers
For Multiplex Chillers
Vertical Discharge Remote Condenser
Standard Interconnecting Refrigerant Lines
Maximum Location Distance—combined vertical and horizontal distances from chiller to condenser must comply with guidelines.
Model
Line Length
Weight
Maximum Line Length: 100' (30 m)*
Maximum Vertical Rise: 100' (30.5 m) above chiller - requires an oil trap every 25' of vertical rise if not terminated in a condenser.
RT-20-R-404A
Maximum Vertical Drop: RT-35-R-404A
100' (30.5 m) below chiller
RT-50-R-404A
To calculate other acceptable horizontal and vertical combinations, refer to remote condenser installation instructions.
20 ft.
11 lbs..
600 cm.
5 kgs.
35 ft.
17 lbs..
1,050 cm.
8 kgs.
50
24 lbs..
1,500 cm.
11 kgs.
Electric Electrical power to the remote condenser is intended to be supplied from the Multiplex chiller. Condenser
Model
Electrical Service
TS-0895
44 or 50
208-230/60/50/1
Weight 85 lbs.. 39 kgs.
m)
28
3c
2.2
(6 0"
.00
" (7
1.1
4.5
2 Optional 34.00" (86.36 cm) or 30.00" (76.20 cm)
2c
m)
E
D
Electrical Entrance
C Discharge Refrig. Line
B F
A 29
G
.16
" (7
4.0
Liquid Refrig. Line
6c
m) TS-0895 Remote Condenser
A B C D
2100 Future Drive Sellersburg, IN 47172 USA
6.00" (15.24 cm) 3.50" (8.89 cm) 3.88" (9.85 cm) 12.13" (30.81 cm)
Tel: 812.246.7000 Fax: 812.246.7024 www.manitowocbeverage.com/us
E F G
1.50" (3.81 cm) 6.50" 16.51 cm) Optional 20.00" (50.80 cm) 16.00" (40.64 cm) 12.00" (30.48 cm)
of specifications without notice.
*230/50/1 available. Consult factory. HACR circuit breakers can be used in place of fuses.
3961C ©2012 Multiplex 3/12 Continuing product improvement may necessitate change
Vertical Discharge Remote Condenser
For Multiplex Chillers
Installation Information and Dimensions
Remote, air-cooled condenser system conserves energy and improves beverage cooling efficiency.
Multiplex remote condenser systems effectively dissipate heat at a convenient location, indoors or outdoors, away from the chiller. This maximizes beverage cooling capability and minimizes air conditioning loads by lowering the ambient air temperature at the chiller.
Standard Features • One size for all remote condenser Multiplex chillers. • Vertical discharge remote condenser is available for Multiplex Model 50 and Model 44. Refer to specification sheet for equipment dimensions, production capacities and electrical requirements. • Condenser operation range from -20°F (-29°C) to 120°F (49°C). Can be installed with up to 15" (38.1 cm) of bottom clearance.
ISO 9001:2000 Quality System Certified
2100 Future Drive
Tel: 812.246.7000
Sellersburg, IN 47172 USA
Fax: 812.246.7024
www.manitowocbeverage.com/us
Vertical Discharge Remote Condenser
For Multiplex Chillers
For Multiplex Chillers
Vertical Discharge Remote Condenser
Standard Interconnecting Refrigerant Lines
Maximum Location Distance—combined vertical and horizontal distances from chiller to condenser must comply with guidelines.
Model
Line Length
Weight
Maximum Line Length: 100' (30 m)*
Maximum Vertical Rise: 100' (30.5 m) above chiller - requires an oil trap every 25' of vertical rise if not terminated in a condenser.
RT-20-R-404A
Maximum Vertical Drop: RT-35-R-404A
100' (30.5 m) below chiller
RT-50-R-404A
To calculate other acceptable horizontal and vertical combinations, refer to remote condenser installation instructions.
20 ft.
11 lbs..
600 cm.
5 kgs.
35 ft.
17 lbs..
1,050 cm.
8 kgs.
50
24 lbs..
1,500 cm.
11 kgs.
Electric Electrical power to the remote condenser is intended to be supplied from the Multiplex chiller. Condenser
Model
Electrical Service
TS-0895
44 or 50
208-230/60/50/1
Weight 85 lbs.. 39 kgs.
m)
28
3c
2.2
(6 0"
.00
" (7
1.1
4.5
2 Optional 34.00" (86.36 cm) or 30.00" (76.20 cm)
2c
m)
E
D
Electrical Entrance
C Discharge Refrig. Line
B F
A 29
G
.16
" (7
4.0
Liquid Refrig. Line
6c
m) TS-0895 Remote Condenser
A B C D
2100 Future Drive Sellersburg, IN 47172 USA
6.00" (15.24 cm) 3.50" (8.89 cm) 3.88" (9.85 cm) 12.13" (30.81 cm)
Tel: 812.246.7000 Fax: 812.246.7024 www.manitowocbeverage.com/us
E F G
1.50" (3.81 cm) 6.50" 16.51 cm) Optional 20.00" (50.80 cm) 16.00" (40.64 cm) 12.00" (30.48 cm)
of specifications without notice.
*230/50/1 available. Consult factory. HACR circuit breakers can be used in place of fuses.
3961C ©2012 Multiplex 3/12 Continuing product improvement may necessitate change
Vertical Discharge Remote Condenser
For Multiplex Chillers
Installation Information and Dimensions
