vesale stone - Marazzi USA
(vesale stone) the fine art of porcelain stoneware
glazed porcelain stoneware
Made In The USA
(vesale stone) glazed porcelain stoneware
the fine art of porcelain stoneware
Made In The USA Moss
Rust
Sand
Smoke
Moss Mosaic - Square 1"x1"
Rust Mosaic - Square 1"x1"
Sand Mosaic - Square 1"x1"
Smoke Mosaic - Square 1"x1"
Moss Mosaic - Square 2"x2"
Rust Mosaic - Square 2"x2"
Sand Mosaic - Square 2"x2"
Smoke Mosaic - Square 2"x2"
Moss Mosaic - Brick 2"x3½"
Rust Mosaic - Square 2"x3½"
Sand Mosaic - Square 2"x3½"
Smoke Mosaic - Square 2"x3½"
DCOF Floor Tile
Wall Tile
MODULAR TILE
Modular Tile
Trim Decorative Suitable for Available Outdoors Tile
FLOOR TILE
Substantial Variation
Frost Abrasion D.C.O.F (Wet Areas) Resistant Resistance (Minimum 0.42)
DECOS
TRIMS*
21%
S.C.O.F (Wet)
S.C.O.F (Dry)
(Valid through 12-31-2013)
(Valid through 12-31-2013)
Thickness Names (colors) Moss (green) Rust (brown) Sand (beige) Smoke (gray)
13"x13" 13"x13" 13"x13" 3"x13"
(16.5x16.5 cm)
(33.3x33.3 cm)
(33.3x33.3 cm)
(33.3x33.3 cm)
Mosaic - Square
Mosaic - Square
Mosaic - Diamond
1"x1"
2"x2"
2"x3½"
Bullnose
UF2Y UF2Z UF22 UF23
UF24 UF25 UF26 UF27
UF28 UF29 UF3A UF3B
UF2U UF2V UF2W UF2X
3
/8"(10mm)
UF2A UF2B UF2C UF2D
(33.3x33.3 cm)
3
(25x50 cm)
(50x50 cm)
/8"(10mm) 7/16"(10.5mm) 7/16"(10.5mm)
UF2L UF2M UF2N UF2P
UF2G UF2H UF2J UF2K
UF2Q UF2R UF2S UF2T
Notes: * Trim is available in all colors and made to complement Modular and Floor Tile.
(8x33.3 cm)
Contributes to LEED Credits
ASTM Test Results Technical Characteristics
6½"x6½" 13"x13" 10"x20"R 20"x20"
VOC
21% Minimum No VOC Pre-Consumer Recycled Content
ASTM Standards
ASTM Test Results ASTM Test Methods
Water Absorption Frost Resistance Scratch Resistance Breaking Strength Facial Dimension Thickness
≤ 0.50% As Reported MOHS 1-10 ≥ 250 lbf. -3.0% < Nominal ≤ 3.0% ≤ 0.04 in (1.02 mm max)
< _ 0.50% Resistant 7 > _ 500 lbf. Within Standard Within Standard
Wedging (squareness)
+/- 0.50% or +/- 2.0 mm**
Within Standard
Warpage (flatness) +/- 0.75% or +/- 2.3 mm** Within Standard Abrasion Resistance Class 0 - Class V Class IV DCOF-Dynamic Coefficient of Friction As Reported Minimum 0.42 (Wet Areas Only)† _ C.O.F. < 0.90 SCOF-Static Coefficient of Friction (Dry) As Reported 0.80 < _ C.O.F. < 0.70 SCOF-Static Coefficient of Friction (Wet) As Reported 0.60 < Chemical Resistance Class A - Class E Class A
Stain Resistance
Class A - Class E
Class A
C373 C1026 MOHS Scale C648 C499 C499 C502 C485 C1027 DCOF AcuTestSM* C1028 C1028 C650
C1378
Dynamic Coefficient of Friction (DCOF) - Water, oil, grease or other fluids create slippery conditions. When installing floors in areas with exposure to these conditions, a minimum D.C.O.F. value of 0.42 is required. Additionally, extra caution is required with regards to product selection and proper maintenance. Visit www.tcnatile.com for complete information regarding the DCOF Acutest test method and values. *DCOF AcuTest is the industry designation for the test procedure contained in ANSI A137.1 Section 9.6, which has been extensively researched, allows for in-situ field measurements, and is in use at tile manufacturing facilities. It was so named to distinguish it from other DCOF measurements using different instruments and/or protocols. ** Whichever is less
†
glazed porcelain stoneware
Made In The USA
(vesale stone) glazed porcelain stoneware
the fine art of porcelain stoneware
Made In The USA Moss
Rust
Sand
Smoke
Moss Mosaic - Square 1"x1"
Rust Mosaic - Square 1"x1"
Sand Mosaic - Square 1"x1"
Smoke Mosaic - Square 1"x1"
Moss Mosaic - Square 2"x2"
Rust Mosaic - Square 2"x2"
Sand Mosaic - Square 2"x2"
Smoke Mosaic - Square 2"x2"
Moss Mosaic - Brick 2"x3½"
Rust Mosaic - Square 2"x3½"
Sand Mosaic - Square 2"x3½"
Smoke Mosaic - Square 2"x3½"
DCOF Floor Tile
Wall Tile
MODULAR TILE
Modular Tile
Trim Decorative Suitable for Available Outdoors Tile
FLOOR TILE
Substantial Variation
Frost Abrasion D.C.O.F (Wet Areas) Resistant Resistance (Minimum 0.42)
DECOS
TRIMS*
21%
S.C.O.F (Wet)
S.C.O.F (Dry)
(Valid through 12-31-2013)
(Valid through 12-31-2013)
Thickness Names (colors) Moss (green) Rust (brown) Sand (beige) Smoke (gray)
13"x13" 13"x13" 13"x13" 3"x13"
(16.5x16.5 cm)
(33.3x33.3 cm)
(33.3x33.3 cm)
(33.3x33.3 cm)
Mosaic - Square
Mosaic - Square
Mosaic - Diamond
1"x1"
2"x2"
2"x3½"
Bullnose
UF2Y UF2Z UF22 UF23
UF24 UF25 UF26 UF27
UF28 UF29 UF3A UF3B
UF2U UF2V UF2W UF2X
3
/8"(10mm)
UF2A UF2B UF2C UF2D
(33.3x33.3 cm)
3
(25x50 cm)
(50x50 cm)
/8"(10mm) 7/16"(10.5mm) 7/16"(10.5mm)
UF2L UF2M UF2N UF2P
UF2G UF2H UF2J UF2K
UF2Q UF2R UF2S UF2T
Notes: * Trim is available in all colors and made to complement Modular and Floor Tile.
(8x33.3 cm)
Contributes to LEED Credits
ASTM Test Results Technical Characteristics
6½"x6½" 13"x13" 10"x20"R 20"x20"
VOC
21% Minimum No VOC Pre-Consumer Recycled Content
ASTM Standards
ASTM Test Results ASTM Test Methods
Water Absorption Frost Resistance Scratch Resistance Breaking Strength Facial Dimension Thickness
≤ 0.50% As Reported MOHS 1-10 ≥ 250 lbf. -3.0% < Nominal ≤ 3.0% ≤ 0.04 in (1.02 mm max)
< _ 0.50% Resistant 7 > _ 500 lbf. Within Standard Within Standard
Wedging (squareness)
+/- 0.50% or +/- 2.0 mm**
Within Standard
Warpage (flatness) +/- 0.75% or +/- 2.3 mm** Within Standard Abrasion Resistance Class 0 - Class V Class IV DCOF-Dynamic Coefficient of Friction As Reported Minimum 0.42 (Wet Areas Only)† _ C.O.F. < 0.90 SCOF-Static Coefficient of Friction (Dry) As Reported 0.80 < _ C.O.F. < 0.70 SCOF-Static Coefficient of Friction (Wet) As Reported 0.60 < Chemical Resistance Class A - Class E Class A
Stain Resistance
Class A - Class E
Class A
C373 C1026 MOHS Scale C648 C499 C499 C502 C485 C1027 DCOF AcuTestSM* C1028 C1028 C650
C1378
Dynamic Coefficient of Friction (DCOF) - Water, oil, grease or other fluids create slippery conditions. When installing floors in areas with exposure to these conditions, a minimum D.C.O.F. value of 0.42 is required. Additionally, extra caution is required with regards to product selection and proper maintenance. Visit www.tcnatile.com for complete information regarding the DCOF Acutest test method and values. *DCOF AcuTest is the industry designation for the test procedure contained in ANSI A137.1 Section 9.6, which has been extensively researched, allows for in-situ field measurements, and is in use at tile manufacturing facilities. It was so named to distinguish it from other DCOF measurements using different instruments and/or protocols. ** Whichever is less
†
