Setup is quick and easy. Just follow these few simple steps and you’ll be up and running in no time.
Step 1
Carefully remove your VistaCam SD and included accessories from their packaging.
Step 2
Step 3
Step 4
Connect the power adapter for your VistaCam SD to the power receptacle on the side of the camera, and then into an AC electrical outlet.
Connect the included Ethernet cable to the back of the camera's LAN port.
You'll see the yellow and green LED lights on the back of your camera light up.
Plug the other end of the cable into an available port on your router.
Your camera is now ready to be "paired" to your Vera Smart Home Controller.
Step 5
Type www.micasaverde.com/ vistacamsd in your browser. Follow the on-screen instructions to complete the initial pairing process and complete the setup of your VistaCam SD, including wireless operation. WI-FI
VistaCam requires WiFi for wireless operation.
Need Help? Please download the complete Owner’s Manual for more detailed setup instructions or visit http://support.micasaverde.com for additional technical support resources. www.micasaverde.com |
[email protected] | +1 (866) 966-2272 | © 2008-2013 Mi Casa Verde, Inc.