Wahl Lithium Ion Trimmer Electric Motor Replacement

Report 3 Downloads 83 Views
Wahl Lithium Ion Trimmer Electric Motor Replacement

Wahl Lithium Ion Trimmer Electric Motor Replacement Motors don’t last forever and could break down or experience a mechanical failure. Just replacing the entire piece and re-wiring some simple connections would fix the device.

Written By: nathan

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Wahl Lithium Ion Trimmer Electric Motor Replacement

PARTS: New motor (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Wahl Lithium Ion Trimmer Electric Motor Replacement

Step 1 — Electric Motor 

Refer to the 4th step in disassemble process to begin replacement of motor.



Remove the chip set, battery and motor as one piece.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Wahl Lithium Ion Trimmer Electric Motor Replacement

Step 3 

In this step focus on the motor, ignoring the chip set and battery. Here you will be able to remove the motor from the wires.



After the wires are removed and the motor is detached use the replacement motor you purchased and reconnect the wires.

Step 4

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 05:17:04 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4