Warning: Unplug and turn off power before installing or

LED Enhancement Light Kit Installation Instructions

24002 LED Enhancement Light Kit - 2’ Universal Header 24003 LED Enhancement Light Kit - 3’ Universal Header 24004 LED Enhancement Light Kit - 4’ Universal Header

Contents: Y-Splitter (1)

Twist Ties (3)

LED Light Fixture (1)

Warning: Unplug and turn off power before installing or servicing.

Clear panel

1.

Unplug Header at the source

2.

To install the Enhancement Light Kit into a header that is currently installed into a Wood Display, first remove header from Wood Display

3.

Lift and remove clear panels and graphics (metal header can remain in place in display)

Graphic Clear panel Remove twist ties Unplug

Clips

4) Remove Twist Ties on top of header

and pull light fixture down and out of clips. Unplug cord from end of fixture.

12.14.15 Instruction Sheet # 202707

Page 1 of 3

LED Enhancement Light Kit Installation Instructions

24002 LED Enhancement Light Kit - 2’ Universal Header 24003 LED Enhancement Light Kit - 3’ Universal Header 24004 LED Enhancement Light Kit - 4’ Universal Header

5) Plug Y-Splitter into existing light fixture as

shown. Plug existing power cord end into Y-Splitter. Snap fixture back into clips.

This end plugs into existing fixture

Power cord end

Y-Splitter

6) Plug remaining end of Y-Splitter into second light fixture and snap into lower mounting clips.

Second Light Fixture

Y-Splitter

Lower Mounting Clips 12.14.15 Instruction Sheet # 202707

Page 2 of 3

LED Enhancement Light Kit Installation Instructions

24002 LED Enhancement Light Kit - 2’ Universal Header 24003 LED Enhancement Light Kit - 3’ Universal Header 24004 LED Enhancement Light Kit - 4’ Universal Header

7) Use (2) Twist Ties as shown to secure second

light fixture to Lower Mounting Clips and (1) to secure Y-Splitter to Header Body.

Twist tie (1)

Twist ties (2)

8) Re-install clear panels and graphic

12.14.15 Instruction Sheet # 202707

Page 3 of 3