Waterhog™ Inlay

Design Specifications:

Waterhog™ Inlay

No Art Fees No Set-Up Fees 4-5 Day Production

High Traffic, Indoor and Outdoor Applications

Waterhog Inlay mats are produced using an inlay process, where colored material is cut and pieced together by hand before pressing into rubber. As a result, there are very strict design requirements for this product. PMS color matching is not available.

Minimum Text Height: 3" (includes lower case text) Minimum Line Thickness: 3/8" Any space between letters or design elements must be at minimum 3/8" Mat Size

Maximum Imprint Area

2' x 3' (23" x 35")

21" x 33"

3' x 4' (35" x 45")

33" x 43"

3' x 5' (35" x 58")

33" x 56"

3' x 10' (35" x 116")

33" x 114"

4' x 6' (45" x 69")

43" x 67"

4' x 8' (45" x 96")

43" x 94"

4' x 10' (45" x 116")

43" x 114"

6' x 8' (70" x 97")

68" x 95"

6' x 12' (70" x 144")

68" x 142"

The text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis. Gradients, tints, screens and transparencies are not supported and should not be used.

www.mountville.com | [email protected] | Phone: 800.241.5549 | Fax: 706.884.0037