we have reviewed the shop drawings submitted
Allen & Shariff Engineering, LLC 205 East Market Street Salisbury, MD 21801 p 410-341-0200 f 410-341-0400
Date Sent Out Job Name Contractor SD Number Shop Dwg submitted by Item submitted for review Shop Dwg reviewed by
4/14/2016
Offices in : Columbia, Md Pittsburgh, Pa Salisbury, Md
SD Number SD.54269
Rehoboth Beach City Hall
Job Number 1431069
265113-1 Whiting-Turner Contracting Co Fluorescent Interior Lighting - PD - electronic submittal John Glover
WE HAVE REVIEWED THE SHOP DRAWINGS SUBMITTED: Review is only for general conformance with the design concept of the project and general compliance with the information given in the contract documents, any action shown is subject to the requirements of the plans and specifications. The contractor is responsible for: dimensions, capacities, quantities, and electrical/mechanical characteristics which shall be confirmed and correlated at the job site; fabrication processes and techniques of construction; coordination of his work with that of all other trades and the satisfactory performance of his work. Shop drawing review does not relieve the contractor from compliance with the requirements of the contract documents.
A NO EXCEPTIONS TAKEN
No further review of Submittal is required. See Comments below
B MAKE CORRECTIONS NOTED
Incorporate corrections in work RESUBMITTAL IS NOT REQUIRED. Record Drawings shall reflect corrections. If contractor cannot comply with corrections as noted, then revise to respond to exception and resubmit.
C REVISE AND RESUBMIT
Revise as noted, and RESUBMIT for further review.
D SUBMIT SPECIFIED ITEM
No substitutions. See specification for acceptable equipment. RESUBMIT.
E REJECTED
Item(s) submitted fail to meet the design intent.
F NOT REVIEWED
See comments below.
Shop Drawing Comments: Approved as submitted
Page 1
EDiS Company • (302) 421-5700 • www.ediscompany.com
City Hall Building - BP-04
[Status: In Review]
Date Created: April 02, 2016 Submittal: 265113-1 Spec Section: Fluorescent Interior Lighting Submittal Type(s): Product Data
Date Processed: Contract: City Hall Building Contractor: Whiting Turner Contracting
Description: Fluorescent Interior Light Project Manager Company: EDiS Company Name: Samara Hamilton Signed: not signed
Architect / Engineer Company: Davis, Bowen & Friede. Name: Chris Cullen Signed: not signed
Stamps (below):
265113-1 | Exported 04/12/2016 by: Allen & Shariff Engineering, LLC
Page 1 of 2
EDiS Company • (302) 421-5700 • www.ediscompany.com
Notes: April 05, 2016 - Chris Cullen added: Please distribute for review and return.
265113-1 | Exported 04/12/2016 by: Allen & Shariff Engineering, LLC
Page 2 of 2
SUBMITTAL COVERSHEET Submittal Number: Title: Type: Date Submitted: Project:
26 51 13-01-00 Fluorescent Interior Light Product Data 4/2/2016 Rehoboth Beach City Hall Rehoboth Beach, DE BP-04
The Whiting-Turner Contracting Company WE HEREBY STATE THAT THIS DOCUMENT HAS BEEN REVIEWED AND APPROVED FOR CONFORMANCE WITH THE DESIGN CONCEPT AND GENERAL COMPLIANCE WITH THE CONTRACT DOCUMENTS. THIS APPROVAL IN NO WAY. RELEASES THE CONTRACTOR/SUPPLIER FROM HIS RESPONSIBILITY TO ADHERE TO THE REQUIREMENTS OF THE CONTRACT DRAWINGS, INCLUDING ALL DIMENSIONS AND QUANTITIES. ☒APPROVED AS SHOWN
Construction Manager:
WT Project No.:
The Whiting-Turner Contracting Company 131 Continental Drive, Suite 404 Newark, DE 19713 302-292-0676 015980
☐APPROVED AS NOTED ☐SUBMITTED FOR RECORD ☐DISAPPROVED – REVISE AND RESUBMIT BY: DATE:
Architect:
Davis Brown & Friedel, Inc. Milford, DE 302-424-1441
Engineer:
Davis Brown & Friedel, Inc. Milford, DE 302-424-1441
Subcontractor: Address: Phone: Manufacturer(s): Comments:
BW Electric, Inc 15342 s Dupont Hwy Harrington, DE 19952 302-566-6248 Yale
Todd Kelby 4/2/2016
Yale Electric Submittal Eastern Region Projects Cherry Hill, NJ
Philadelphia, PA
Willow Grove, PA
Newark, DE
Reading, PA
West Chester, PA
Date: Project: Contractor: PO Number: Engineer: Architect: Product: Spec Sections:
3/31/16 Rehoboth Beach City Hall Complex BW Electric
265113
1st Submission
Record Drawings
2nd Submission
Operation & Maintenance
Factory Drawings
Other
Notes: Fluorescent Interior Lighting
The CONTRACTOR is solely responsible for the correctness of dimensions and quantities and fitting to other work: verification of physical interrelation of elements of the work from plans and specifications and in the field fabricating, procedures, construction methods, technologies and sequences. This submittal is based on Yale Electric's interpretation of plans and specs and does not relieve the contractor from these responsibilities.
Lighting Fixture Submittal Project Name: Rehoboth Beach City Hall Complex Fluorescent Interior Lighting
Electrical Contractor: BW Electric Date: 3/31/16 Type
Manufacturer
Catalog No.
F G1 P1 V W
LITHONIA LITHONIA NEWSTAR LITHONIA LITHONIA
L 2 32 MVOLT GEB10IS WGL WT5 1 54T5HO MVOLT GEB10PS 55M4 B 2 32 1 3/C 27 AH DMW 2 32 MVOLT GEB10IS W 2 32 MVOLT GEB10IS
Project 15-29499-7 REHOBOTH CITY HALL
Catalog Number
Type
L 2 32 MVOLT GEB10IS WGL
F
Submitted By
Notes
ILLUMINATIONS INC
Catalog Number Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE — Intended for mounting heights up to 16’ requiring low to medium light levels. Ideal for light duty task lighting, utility, storage rooms or retail. CONSTRUCTION — Channel constructed of die-formed cold rolled steel. Sturdy combination reflector and channel cover constructed of die-formed cold rolled steel and secured by quarter-turn latch for easy access to wire-way. Screw on endplates. Available in 2’, 4’, or 8’ tandem wired lengths. Accepts plug-in option for 1, 2 or 3 primary circuits.
Standard Industrial
L
Finish: Five-stage iron phosphate pretreatment ensures superior paint adhesion and corrosion-resistance. Reflector and channel finished with a high-gloss baked white enamel. OPTICS — Solid top or apertured 8% uplight available. Both reflectors are die-embossed. ELECTRICAL — Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed and CSA Certified ballast is standard. Sound rating depends on lamp/ballast combination.
2', 4' or 8' length 1 or 2 lamps
AWM, TFN, THHN wire throughout, rated for required temperatures. INSTALLATION — For unit or row installations, surface or suspended mounting. LISTINGS — UL Listed for 25°C ambient temperatures. 120V, 277V and MVOLT are UL Listed and CSA Certified (standard). 347V is CSA Certified (see Options). NOM Certified (see Options). Suitable for damp locations. WARRANTY — 1-year limited warranty. Full warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Specifications Length: 24 (61.0) 48 (121.9) 96 (243.8) Width: 12 (30.5) Fixture depth: 4 (10.2)
Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice.
4 (10.2) 12 (30.5)
All dimensions are inches (centimeters) unless otherwise indicated.
ORDERING INFORMATION
Number of lamps
Series L
Lead times will vary depending on options selected. Consult with your sales representative.
Standard industrial, solid top LA Standard industrial, apertured reflector For tandem doublelength unit, add prefix T. Example: TL
1 2 Not included
Lamp type 17 32 48T8HO 96T8 96T8HO
Voltage 17W T8 (24") 32W T8 (48") 60W T8 slimline (48”) 59W T8 slimline (96”) 86W T8 300mA (96”)
120 277 347 MVOLT Others available
Example: L 2 32 MVOLT GEB10IS
Options GEB10IS GEB10RS GEB10PS EL5 EL6 EL14 GLR GMF PLF_
Electronic ballast,
Date Sent Out Job Name Contractor SD Number Shop Dwg submitted by Item submitted for review Shop Dwg reviewed by
4/14/2016
Offices in : Columbia, Md Pittsburgh, Pa Salisbury, Md
SD Number SD.54269
Rehoboth Beach City Hall
Job Number 1431069
265113-1 Whiting-Turner Contracting Co Fluorescent Interior Lighting - PD - electronic submittal John Glover
WE HAVE REVIEWED THE SHOP DRAWINGS SUBMITTED: Review is only for general conformance with the design concept of the project and general compliance with the information given in the contract documents, any action shown is subject to the requirements of the plans and specifications. The contractor is responsible for: dimensions, capacities, quantities, and electrical/mechanical characteristics which shall be confirmed and correlated at the job site; fabrication processes and techniques of construction; coordination of his work with that of all other trades and the satisfactory performance of his work. Shop drawing review does not relieve the contractor from compliance with the requirements of the contract documents.
A NO EXCEPTIONS TAKEN
No further review of Submittal is required. See Comments below
B MAKE CORRECTIONS NOTED
Incorporate corrections in work RESUBMITTAL IS NOT REQUIRED. Record Drawings shall reflect corrections. If contractor cannot comply with corrections as noted, then revise to respond to exception and resubmit.
C REVISE AND RESUBMIT
Revise as noted, and RESUBMIT for further review.
D SUBMIT SPECIFIED ITEM
No substitutions. See specification for acceptable equipment. RESUBMIT.
E REJECTED
Item(s) submitted fail to meet the design intent.
F NOT REVIEWED
See comments below.
Shop Drawing Comments: Approved as submitted
Page 1
EDiS Company • (302) 421-5700 • www.ediscompany.com
City Hall Building - BP-04
[Status: In Review]
Date Created: April 02, 2016 Submittal: 265113-1 Spec Section: Fluorescent Interior Lighting Submittal Type(s): Product Data
Date Processed: Contract: City Hall Building Contractor: Whiting Turner Contracting
Description: Fluorescent Interior Light Project Manager Company: EDiS Company Name: Samara Hamilton Signed: not signed
Architect / Engineer Company: Davis, Bowen & Friede. Name: Chris Cullen Signed: not signed
Stamps (below):
265113-1 | Exported 04/12/2016 by: Allen & Shariff Engineering, LLC
Page 1 of 2
EDiS Company • (302) 421-5700 • www.ediscompany.com
Notes: April 05, 2016 - Chris Cullen added: Please distribute for review and return.
265113-1 | Exported 04/12/2016 by: Allen & Shariff Engineering, LLC
Page 2 of 2
SUBMITTAL COVERSHEET Submittal Number: Title: Type: Date Submitted: Project:
26 51 13-01-00 Fluorescent Interior Light Product Data 4/2/2016 Rehoboth Beach City Hall Rehoboth Beach, DE BP-04
The Whiting-Turner Contracting Company WE HEREBY STATE THAT THIS DOCUMENT HAS BEEN REVIEWED AND APPROVED FOR CONFORMANCE WITH THE DESIGN CONCEPT AND GENERAL COMPLIANCE WITH THE CONTRACT DOCUMENTS. THIS APPROVAL IN NO WAY. RELEASES THE CONTRACTOR/SUPPLIER FROM HIS RESPONSIBILITY TO ADHERE TO THE REQUIREMENTS OF THE CONTRACT DRAWINGS, INCLUDING ALL DIMENSIONS AND QUANTITIES. ☒APPROVED AS SHOWN
Construction Manager:
WT Project No.:
The Whiting-Turner Contracting Company 131 Continental Drive, Suite 404 Newark, DE 19713 302-292-0676 015980
☐APPROVED AS NOTED ☐SUBMITTED FOR RECORD ☐DISAPPROVED – REVISE AND RESUBMIT BY: DATE:
Architect:
Davis Brown & Friedel, Inc. Milford, DE 302-424-1441
Engineer:
Davis Brown & Friedel, Inc. Milford, DE 302-424-1441
Subcontractor: Address: Phone: Manufacturer(s): Comments:
BW Electric, Inc 15342 s Dupont Hwy Harrington, DE 19952 302-566-6248 Yale
Todd Kelby 4/2/2016
Yale Electric Submittal Eastern Region Projects Cherry Hill, NJ
Philadelphia, PA
Willow Grove, PA
Newark, DE
Reading, PA
West Chester, PA
Date: Project: Contractor: PO Number: Engineer: Architect: Product: Spec Sections:
3/31/16 Rehoboth Beach City Hall Complex BW Electric
265113
1st Submission
Record Drawings
2nd Submission
Operation & Maintenance
Factory Drawings
Other
Notes: Fluorescent Interior Lighting
The CONTRACTOR is solely responsible for the correctness of dimensions and quantities and fitting to other work: verification of physical interrelation of elements of the work from plans and specifications and in the field fabricating, procedures, construction methods, technologies and sequences. This submittal is based on Yale Electric's interpretation of plans and specs and does not relieve the contractor from these responsibilities.
Lighting Fixture Submittal Project Name: Rehoboth Beach City Hall Complex Fluorescent Interior Lighting
Electrical Contractor: BW Electric Date: 3/31/16 Type
Manufacturer
Catalog No.
F G1 P1 V W
LITHONIA LITHONIA NEWSTAR LITHONIA LITHONIA
L 2 32 MVOLT GEB10IS WGL WT5 1 54T5HO MVOLT GEB10PS 55M4 B 2 32 1 3/C 27 AH DMW 2 32 MVOLT GEB10IS W 2 32 MVOLT GEB10IS
Project 15-29499-7 REHOBOTH CITY HALL
Catalog Number
Type
L 2 32 MVOLT GEB10IS WGL
F
Submitted By
Notes
ILLUMINATIONS INC
Catalog Number Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE — Intended for mounting heights up to 16’ requiring low to medium light levels. Ideal for light duty task lighting, utility, storage rooms or retail. CONSTRUCTION — Channel constructed of die-formed cold rolled steel. Sturdy combination reflector and channel cover constructed of die-formed cold rolled steel and secured by quarter-turn latch for easy access to wire-way. Screw on endplates. Available in 2’, 4’, or 8’ tandem wired lengths. Accepts plug-in option for 1, 2 or 3 primary circuits.
Standard Industrial
L
Finish: Five-stage iron phosphate pretreatment ensures superior paint adhesion and corrosion-resistance. Reflector and channel finished with a high-gloss baked white enamel. OPTICS — Solid top or apertured 8% uplight available. Both reflectors are die-embossed. ELECTRICAL — Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed and CSA Certified ballast is standard. Sound rating depends on lamp/ballast combination.
2', 4' or 8' length 1 or 2 lamps
AWM, TFN, THHN wire throughout, rated for required temperatures. INSTALLATION — For unit or row installations, surface or suspended mounting. LISTINGS — UL Listed for 25°C ambient temperatures. 120V, 277V and MVOLT are UL Listed and CSA Certified (standard). 347V is CSA Certified (see Options). NOM Certified (see Options). Suitable for damp locations. WARRANTY — 1-year limited warranty. Full warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Specifications Length: 24 (61.0) 48 (121.9) 96 (243.8) Width: 12 (30.5) Fixture depth: 4 (10.2)
Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice.
4 (10.2) 12 (30.5)
All dimensions are inches (centimeters) unless otherwise indicated.
ORDERING INFORMATION
Number of lamps
Series L
Lead times will vary depending on options selected. Consult with your sales representative.
Standard industrial, solid top LA Standard industrial, apertured reflector For tandem doublelength unit, add prefix T. Example: TL
1 2 Not included
Lamp type 17 32 48T8HO 96T8 96T8HO
Voltage 17W T8 (24") 32W T8 (48") 60W T8 slimline (48”) 59W T8 slimline (96”) 86W T8 300mA (96”)
120 277 347 MVOLT Others available
Example: L 2 32 MVOLT GEB10IS
Options GEB10IS GEB10RS GEB10PS EL5 EL6 EL14 GLR GMF PLF_
Electronic ballast,
