WeldSkill 140 Turbo Manual Arc Welding Machine - eWelders
WeldSkill 140 Turbo Manual Arc Welding Machine The CIGWELD Weldskill 140 Turbo is a fan cooled home
power point. It will run standard general purpose 2.0mm
arc welder that has a welding current range from 40 to 140
electrodes for light gauge steel, generally less than 3.0mm
amps and is designed to operate from a 240V, 15 Amp
thick, and up to 3.2mm electrodes for heavier sections.
Standard contents WeldSkill 140 power source Electrode holder and 3m lead (fitted) Work clamp and 3m lead (fitted) Welding face shield and lens Chipping hammer/wire brush Operating manual
FAN COOLED
Fan Cooled for improved duty cycle and welding performance OVERHEAT
Over Temperature Cut Out protection has been fitted to this power source
Machine Specifications Input Voltage
240 Volts, +/– 15%
Input Frequency Generator requirement Output range Rated Output @ Duty Cycle Max OCV Dimensions (HxWxD) mm Weight (Power Source)
50 Hz 7.2 kVA 40 – 140 amps 140A @ 5% 65V DC 270H x 170W x 350Dmm 16 kg
SUPPLY LEAD
240 Volt, 15 Amp Supply Lead fitted to power source* 240V 15A ELECTRODE SIZE
3.2mm MAX STANDARD
AS WARRANTY
Ordering Information
Part No:
WeldSkill 140 Turbo Plant
W1002100
1
YEAR
Maximum Electrode Size 3.2mm Power source is suitable for 2.0mm, 2.5mm and 3.2mm electrode sizes Australian Standards Compliance This power source complies to the relevant Australian Standard, AS 60974.6-2006* 1 Year Warranty This equipment is manufactured to stringent CIGWELD quality standards and is backed by a conditional One Year warranty* * Refer to operating manual for details
15
power point. It will run standard general purpose 2.0mm
arc welder that has a welding current range from 40 to 140
electrodes for light gauge steel, generally less than 3.0mm
amps and is designed to operate from a 240V, 15 Amp
thick, and up to 3.2mm electrodes for heavier sections.
Standard contents WeldSkill 140 power source Electrode holder and 3m lead (fitted) Work clamp and 3m lead (fitted) Welding face shield and lens Chipping hammer/wire brush Operating manual
FAN COOLED
Fan Cooled for improved duty cycle and welding performance OVERHEAT
Over Temperature Cut Out protection has been fitted to this power source
Machine Specifications Input Voltage
240 Volts, +/– 15%
Input Frequency Generator requirement Output range Rated Output @ Duty Cycle Max OCV Dimensions (HxWxD) mm Weight (Power Source)
50 Hz 7.2 kVA 40 – 140 amps 140A @ 5% 65V DC 270H x 170W x 350Dmm 16 kg
SUPPLY LEAD
240 Volt, 15 Amp Supply Lead fitted to power source* 240V 15A ELECTRODE SIZE
3.2mm MAX STANDARD
AS WARRANTY
Ordering Information
Part No:
WeldSkill 140 Turbo Plant
W1002100
1
YEAR
Maximum Electrode Size 3.2mm Power source is suitable for 2.0mm, 2.5mm and 3.2mm electrode sizes Australian Standards Compliance This power source complies to the relevant Australian Standard, AS 60974.6-2006* 1 Year Warranty This equipment is manufactured to stringent CIGWELD quality standards and is backed by a conditional One Year warranty* * Refer to operating manual for details
15
