Wireguard Clip Installation

Wireguard Clip Installation To Install: Step 1. Snap the four HINGE CLIPS on to the strip body per sketch. (Two clips per side - placed approx. 9” from each end.) Step 2. Install cover plate and lamps. Step 3. Install guard by snapping edge wire into hinge lock of clip. (One side at a time.) Step 4. Guard will hinge down from either side by pressing down on clip guides on one side of the fixture and applying an upward pressure on guard. Wireguard Clip - 4 per Guard

Strip Body Snap-on Hinge Clip Cover Plate Material: 25 gauge Spring Steel, Zinc Coated

4.62 [ 117.33]

4.22 [ 107.16]

2.58 [ 65.41]

5.96 [ 151.49] STAPLE CLEAR PLASTIC BAG WITH (4 EA.) CLIPS TO THE WIREGUARD.

2.00 x 2.50 WIRE MESH [50.80 x 63.50] TYPICAL

47.94

1121 Highway 74 South • Peachtree City, GA 30269 • 770.486.4800

ADF060379

0590SSWG