WP East Builders - Amazon Simple Storage Service
WP East Builders – 37 Washington, LLC Project: 37 Washington Street Project No. 41119
Submittal No.: 41119 - 09 5113 - 161.0 Submittal Title: Acoustic Panel Ceilings - Acoustic Panels & Metal Suspension System
WP East Builders – 37 Washington, LLC 09 5113 - 161.0 SUBMITTAL/DRAWINGS AS SUBMITTED SUBMITTAL No. _________________ APPROVED: DISAPPROVED & RESUBMIT:
APPROVED AS NOTED:
These submittals/drawings have been reviewed by WP East Builders – 37 Washington, L LC for general compliance with the contract documents. Approval by WPE in no way relieves the subcontractor/vendor from the responsibility of total compliance with the contract documents. The Subcontractor/vendor is responsible for all dimensions, quantities, engineering calculations and product quality per the contract documents, No Deviations are authorized unless they are in writing.
6/13/16 Date: ___________________
JB REVIEWED BY: ___________________
Harding Acousitcal Interiors - Please provide samples of grid and panels as well as submittal on wire hangers, braces and ties. Please note that ceiling is suspended from post tensioned slab.
A/E: Please advise maximum fastener embedment length into PT slab
Wood Partners is a Group of Limited Liability Companies 91 Hartwell AVENUE, 3rd Floor LEXINGTON, MASSACHUSETTS 02421 PHONE: 978.369.8111 FAX: 781-861-0729
HARDING ACOUSTICAL INTERIORS, INC. P.O. BOX 31 MEDFIELD, MA 02052 TEL: (508) 359-2706 FAX: (508) 359-6406 [email protected] SUBMITTAL Acoustical Ceilings DATE:
6/11/16
TO:
Wood Partners 91 Hartwell Ave. Lexington, Ma. 02421
ATTN:
Jon Bertolami
PROJECT:
37 Washington St. 37 Washington St. Melrose, Ma. 02176
Item #1
USG “Sheetrock” Vinyl Faced Ceiling Tile
Item #2
USG “DXLA” Aluminum Capped Grid System
Please accept this digital transmission as a submittal of the Acoustical Ceilings for approval.
Submitted by: Greg Harding Harding Acoustical Interiors P.O. Box 31 Medfield, Ma. 02052
.
Sheetrock Lay-In Ceiling Panel ClimaPlus
Ceiling Tile
™
HRC
™
Sheetrock Lay-In Ceiling Panel, Vinyl, with ClimaPlus Performance/ Donn ZXLA Suspension System
LEED Credits Recycled Content: 23% – 56% ClimaPlus No-Sag Warranty
MR
Waste Recycled Regional Reduction Content Materials1
•
EQ
Rapidly Renewable Materials
•
•
Low-Emitting Materials
Daylight and Views
•
Acoustical Performance
Year Availability 3270
High Recycled Content
Features and Benefits
Applications
– PVC-FREE panels feature a proprietary non-vinyl face material that is free of PVC and Phthalates – Clean Room™ panels can be used in clean room environments up to class 100 – Washable and scrubbable finish– impact and scratch resistant – Panels meet USDA/FSIS requirements for food processing areas – ClimaPlus ™ 30-year lifetime no-sag system warranty
– Kitchens and food preparation areas – Restrooms and utility areas – Locker rooms – Parking garages – Exterior protected soffits Substrate
•
– Gypsum panel Smooth-textured panel - Vinyl (PVC)
Smooth-textured panel - PVC-FREE
To order samples, go to usg.com
White
Sheetrock Lay-In Ceiling Panel ClimaPlus
To order samples/literature: – Web: usg.com – E-mail: [email protected] – Fax: 888 874.2348 Technical Services: 800 USG.4YOU
™
™
Edge
Panel Size
SQ
2'x2'x1/2"
Class
2
Web Sites: usg.com usgdesignstudio.com sustainableceilings.com seismicceilings.com
See usg.com for the most up-to-date product information.
UL Classified
Item No.
NRC3
CAC Min.
LR4
Color
3260
–
35
.77
White
AbuseResistant
Grid Options
Recycled Content1
Panel Cost
A, B,
23%
$
23%
$
56%
$
Year System Warranty 30 – No visible sag 30
Sheetrock Lay-In Ceiling Panel ClimaPlus, Vinyl
C, D 3270
2'x4'x1/2"
–
40
.77
White
A, B, C, D
Sheetrock Lay-In Ceiling Panel ClimaPlus, PVC-FREE7
SQ
3220
2'x2'x1/2"
–
35
.85
White
A, B, C, D
3230
2'x4'x1/2"
–
40
.85
White
A, B, C, D
Sheetrock Lay-In Ceiling Panel ClimaPlus, Clean Room5
SQ
3200
2'x4'x1/2"
–
40
.77
White
A, B,
HRC
56%
$
HRC
23%
$$
C, D
Legend HRC High Recycled Content Classified as containing greater than 50% total recycled content. Total recycled content is based on product composition of post-consumer and pre-consumer (post-industrial) recycled content per FTC guidelines.
A Donn® DX®/DXL™
B Donn® DXLA™
C ZXLA™
D Donn CE ™6
Grid Profile Options
Physical Data/ Footnotes
Product literature Data sheet: SC1820
Thermal resistance 1/2" = up to R-0.45
ASTM E1264 classification Type XX, Pattern G
Maximum backloading See Warranty for details.
ASTM E84 surface burning characteristics Class A Vinyl Flame spread: 25 Smoke developed: 50 PVC-Free Flame spread: 25 Smoke developed: 50 Clean Room Flame spread: 25 Smoke developed: 50
Maintenance Can be cleaned easily with a damp sponge. Use mild detergent and water – do not use acetate, ammonia or high concentration of chlorine, bromide or other harsh chemicals.
Weight 1/2" = 2.00 lb./sq. ft.
Manufactured by USG Interiors, Inc. 550 West Adams Street Chicago, IL 60661
Sustainability No formaldehyde was added to any ingredient or during the manufacturing process
Footnotes 1. For details, see LEED report generator at usgdesignstudio.com. 2. Fire-rated items: see UL design details. 3. NRC rating is .10. USG does not consider a ceiling panel to be acoustically rated if NRC is less than .50 4. LR values are shown as averages. 5. Field-cut edges of Clean Room panels must be sealed with white latex paint. 6. Clean-room-rated applications require a suspension system with gasketed tee flanges such as Donn CE.
7. High Scrubbability/High Washability– PVC-FREE panels have been tested to withstand 10,000 scrub/wash cycles (ASTM D2486/ASTM D4828) 8. No formaldehyde is added to any ingredient or during the manufacturing process for all gypsum ceiling products manufactured by USG Interiors, Inc.
U.S. Coast Guard acceptance Approved for use on merchant ships.
The following are trademarks of USG Interiors, Inc. Safety First! Follow good safety/industrial hygiene practices or a related company: CE, Clean Room, ClimaPlus, Donn, during installation. Wear appropriate personal protective equipment. DX, DXL, DXLA, Firecode, Sheetrock, USG, ZXLA. Read MSDS and literature before specification and installation.
SC1820/rev. 2-11 © 2011, USG Interiors, Inc. Printed in U.S.A.
DXLA /DXACE ™
™
Ceiling Grid
HRC Year Availability
Features and Benefits
Donn DXLA Suspension System/ Eclipse Firecode Formulation Panels with ClimaPlus Performance
LEED Credits Recycled Content: Up to 51%
MR
Waste Reduction
•
Recycled Content
•
Regional Materials
•
EQ
Rapidly Renewable Materials
Low-Emitting Materials
Daylight and Views
Shadowline Tapered
– ICC-ES evaluated approach to – Meets 2010 Guidelines for Health Care Facilities seismic design installations – 15/16" exposed, fire-rated, system with aluminum cap (ICC-ESR-1222) – Capable of withstanding cleaning and/or disinfecting – Custom color available Eclipse Panels with ClimaPlus Superior onn Brand Fineline Suspension System chemicals as tested in Performance/D accordance with ASTM D5402-06 Applications – No crevices between suspension system and tile – Healthcare facilities, restricted – Maximum economy and design simplicity with UL designs and semi-restricted areas (up to 2 hours) 8 – Fire-rated 8 – Showed superior performance when tested for severe – Food processing areas environmental conditions in accordance with ASTM C635 – Certified to meet ISO 14644-1 – Suitable for use in food processing areas and meets Class 5 (Fed. Standard 209E USDA/FSIS requirements Class 100)9 – Cross-tee override ends resist twisting and give a Acoustical
Performance
Edge Detail
Profile
Square Edge
professionally finished look – Proprietary Quick-Release™ cross tees – White gasket blends with grid and tile9 To order samples, go to usg.com
Flat White
15/16"
15/16"
DXLA
DXACE
Shadowline
Square Edge w/ Gasket
High Recycled Content
Shadowline Beveled
Silver Satin 002
DXLA /DXACE ™
To order samples/literature: – Web: usg.com – E-mail: [email protected] – Fax: 888 874.2348 Technical Services: 800 USG.4YOU
™
Seismic Design Category
Web Sites: usg.com usgdesignstudio.com sustainableceilings.com seismicceilings.com
See usg.com for the most up-to-date product information.
Rated Load 2
AD LO
Length
Height
Intermediate Duty
12'
1.64"
Heavy Duty
12'
1-1/2"
Cross Tee 1"
2'
1"
Cross Tee 1-1/2"
4'
1-1/2"
12'
1-1/2"
Item No.3
Class
Color3
IBC
ICC-ES Evaluated 4' Hanger Installation Spacing
5' Hanger Spacing
Flat White Silver Satin
A-C
7/8" Molding ACM7 Clip
12 lbs./LF
6.1 lbs./LF
Flat White
A-F
7/8" Molding ACM7 Clip
16 lbs./LF
7.3 lbs./LF
16 lbs./LF
7.3 lbs./LF
T
ASTM Class N
C
O M A P L I
System meets or exceeds load compliance specifications per ASTM C635 DXLA 15/16" Tee System
Main Tee
DXLA241
(up to 61% recycled cont.) HRC
DXLA261
(up to 51% recycled cont.) HRC
DXLA2161
Flat White Silver Satin
DXLA4241
Flat White Silver Satin
(up to 51% recycled cont.) HRC
DXACE 15/16" Tee System
Main Tee
Heavy Duty
DXACE26
7
(up to 51% recycled cont.)
Class A
Flat White7
Class A
Flat White7
Class A
Flat White7
HRC
Cross Tee 1-1/2"
2'
1-1/2"
4'
1-1/2"
DXACE2247
(up to 51% recycled cont.) HRC
DXACE4247
(up to 51% recycled cont.) HRC
Wall Angle
Length
Molding
10'
5, 6
1"
Item No.
Color
MC11A25
Flat White
(up to 52% recycled cont.)
Non-Rated
12'
7/8"
M7A
(up to 90% recycled cont.)
Item No.
Color6
12'
M7Z
Flat White Silver Satin
(up to 65% recycled cont.) HRC
7/8"
12'
Flat White
HRC
7/8"
Length
7/8"
HRC
1"
Wall Angle
7/8" 7/8"
M7ACE
(up to 65% recycled cont.)
Flat White
HRC
HRC High Recycled Content Classified as containing greater than 50% total recycled content. Total recycled content is based on product composition of post-consumer and pre-consumer (post-industrial) recycled content per FTC guidelines.
Physical Data/ Footnotes
Product literature & samples Data sheet: AC3036. DXLA Sample: 215675. DXACE Sample: 207901.
For exterior applications, suspension should be reviewed by a structural engineer.
The City of New York BSA and MEA Report Compliance
Health care facilities – No crevice created between suspension system and tile, meets or exceeds requirements for restricted and semi-restricted areas. – Capable of withstanding cleaning and/or disinfecting chemicals as tested in accordance with ASTM D5402-06.
Donn suspension systems have been approved by listing in one or more ICC Evaluation Service, Inc., of the following City of New York Material Report Compliance Board of Standards and Appeals, and Fire-rated, G30 double-web, hot-dipped Suspension systems manufactured Department of Building, Material and galvanized steel body and aluminum cap. by USG Interiors, LLC, have been Equipment Acceptance reports: reviewed and are approved by listing in Recycled content BSA 618-60-SM, BSA 184-77-SM, ICC-ESR-1222. Evaluation Reports are For details, see the LEED report BSA 796-81-SM, MEA 366-93-M, Footnotes subject to reexamination, revision and generator at usgdesignstudio.com. MEA 133-95-M, MEA 312-99-M, 1. Hanger wire spacing and locations possible cancellation. Please Installation MEA 123-00-M. must be per the UL design. refer to usgdesignstudio.com or Must be installed in compliance with 2. Load test data shows uniform load 800 USG.4YOU for current reports. ASTM C635 Standard ASTM C636, ASTM E580, CISCA and in lbs./LF based on simple span tests in L.A. Research Report Compliance for Load Compliance standard industry practices. accordance with ASTM C635 deflection This system meets or exceeds load Donn brand suspension systems limit on L/360. Limitations compliance specifications per ASTM manufactured by USG Interiors, LLC, 3. Some products are available in Severe Environmental Requirements: C635. Main tees will not deflect more have been reviewed and are approved For panels in exposed grids in fire-rated by listing in one or more of the following than 1/8" over a 48" span (or L/360) in metric and custom colors. Call Customer Service for details. and/or high-humidity applications, use L.A. Research Report numbers: 22179, Light Duty, Intermediate Duty or Heavy ZXLA™ suspension systems. Duty categories. 23451, 24095, 25764. Manufactured by USG Interiors, LLC The following are trademarks of USG Interiors, LLC Safety First! Follow good safety/industrial hygiene practices 550 West Adams Street during installation. Wear appropriate personal protective equipment. or a related company: ClimaPlus, Donn, DXL, DXLA, Eclipse, Firecode, Quick-Release, USG, USG in stylized Chicago, IL 60661 Read MSDS and literature before specification and installation. letters, ZXLA.
4. Channel moldings also acceptable in some UL designs. 5. For more information on moldings, see Perimeter Interface selector. 6. Panels must be field-cut to size at the perimeter. For Shadowline detail, field-cut edge must be at least as wide as the factory cut. 7. DXACE available in flat white only. 8. DXLA only. 9. DXACE only.
AC3036/rev. 1-12 © 2012 USG Interiors, LLC Printed in U.S.A.
Submittal No.: 41119 - 09 5113 - 161.0 Submittal Title: Acoustic Panel Ceilings - Acoustic Panels & Metal Suspension System
WP East Builders – 37 Washington, LLC 09 5113 - 161.0 SUBMITTAL/DRAWINGS AS SUBMITTED SUBMITTAL No. _________________ APPROVED: DISAPPROVED & RESUBMIT:
APPROVED AS NOTED:
These submittals/drawings have been reviewed by WP East Builders – 37 Washington, L LC for general compliance with the contract documents. Approval by WPE in no way relieves the subcontractor/vendor from the responsibility of total compliance with the contract documents. The Subcontractor/vendor is responsible for all dimensions, quantities, engineering calculations and product quality per the contract documents, No Deviations are authorized unless they are in writing.
6/13/16 Date: ___________________
JB REVIEWED BY: ___________________
Harding Acousitcal Interiors - Please provide samples of grid and panels as well as submittal on wire hangers, braces and ties. Please note that ceiling is suspended from post tensioned slab.
A/E: Please advise maximum fastener embedment length into PT slab
Wood Partners is a Group of Limited Liability Companies 91 Hartwell AVENUE, 3rd Floor LEXINGTON, MASSACHUSETTS 02421 PHONE: 978.369.8111 FAX: 781-861-0729
HARDING ACOUSTICAL INTERIORS, INC. P.O. BOX 31 MEDFIELD, MA 02052 TEL: (508) 359-2706 FAX: (508) 359-6406 [email protected] SUBMITTAL Acoustical Ceilings DATE:
6/11/16
TO:
Wood Partners 91 Hartwell Ave. Lexington, Ma. 02421
ATTN:
Jon Bertolami
PROJECT:
37 Washington St. 37 Washington St. Melrose, Ma. 02176
Item #1
USG “Sheetrock” Vinyl Faced Ceiling Tile
Item #2
USG “DXLA” Aluminum Capped Grid System
Please accept this digital transmission as a submittal of the Acoustical Ceilings for approval.
Submitted by: Greg Harding Harding Acoustical Interiors P.O. Box 31 Medfield, Ma. 02052
.
Sheetrock Lay-In Ceiling Panel ClimaPlus
Ceiling Tile
™
HRC
™
Sheetrock Lay-In Ceiling Panel, Vinyl, with ClimaPlus Performance/ Donn ZXLA Suspension System
LEED Credits Recycled Content: 23% – 56% ClimaPlus No-Sag Warranty
MR
Waste Recycled Regional Reduction Content Materials1
•
EQ
Rapidly Renewable Materials
•
•
Low-Emitting Materials
Daylight and Views
•
Acoustical Performance
Year Availability 3270
High Recycled Content
Features and Benefits
Applications
– PVC-FREE panels feature a proprietary non-vinyl face material that is free of PVC and Phthalates – Clean Room™ panels can be used in clean room environments up to class 100 – Washable and scrubbable finish– impact and scratch resistant – Panels meet USDA/FSIS requirements for food processing areas – ClimaPlus ™ 30-year lifetime no-sag system warranty
– Kitchens and food preparation areas – Restrooms and utility areas – Locker rooms – Parking garages – Exterior protected soffits Substrate
•
– Gypsum panel Smooth-textured panel - Vinyl (PVC)
Smooth-textured panel - PVC-FREE
To order samples, go to usg.com
White
Sheetrock Lay-In Ceiling Panel ClimaPlus
To order samples/literature: – Web: usg.com – E-mail: [email protected] – Fax: 888 874.2348 Technical Services: 800 USG.4YOU
™
™
Edge
Panel Size
SQ
2'x2'x1/2"
Class
2
Web Sites: usg.com usgdesignstudio.com sustainableceilings.com seismicceilings.com
See usg.com for the most up-to-date product information.
UL Classified
Item No.
NRC3
CAC Min.
LR4
Color
3260
–
35
.77
White
AbuseResistant
Grid Options
Recycled Content1
Panel Cost
A, B,
23%
$
23%
$
56%
$
Year System Warranty 30 – No visible sag 30
Sheetrock Lay-In Ceiling Panel ClimaPlus, Vinyl
C, D 3270
2'x4'x1/2"
–
40
.77
White
A, B, C, D
Sheetrock Lay-In Ceiling Panel ClimaPlus, PVC-FREE7
SQ
3220
2'x2'x1/2"
–
35
.85
White
A, B, C, D
3230
2'x4'x1/2"
–
40
.85
White
A, B, C, D
Sheetrock Lay-In Ceiling Panel ClimaPlus, Clean Room5
SQ
3200
2'x4'x1/2"
–
40
.77
White
A, B,
HRC
56%
$
HRC
23%
$$
C, D
Legend HRC High Recycled Content Classified as containing greater than 50% total recycled content. Total recycled content is based on product composition of post-consumer and pre-consumer (post-industrial) recycled content per FTC guidelines.
A Donn® DX®/DXL™
B Donn® DXLA™
C ZXLA™
D Donn CE ™6
Grid Profile Options
Physical Data/ Footnotes
Product literature Data sheet: SC1820
Thermal resistance 1/2" = up to R-0.45
ASTM E1264 classification Type XX, Pattern G
Maximum backloading See Warranty for details.
ASTM E84 surface burning characteristics Class A Vinyl Flame spread: 25 Smoke developed: 50 PVC-Free Flame spread: 25 Smoke developed: 50 Clean Room Flame spread: 25 Smoke developed: 50
Maintenance Can be cleaned easily with a damp sponge. Use mild detergent and water – do not use acetate, ammonia or high concentration of chlorine, bromide or other harsh chemicals.
Weight 1/2" = 2.00 lb./sq. ft.
Manufactured by USG Interiors, Inc. 550 West Adams Street Chicago, IL 60661
Sustainability No formaldehyde was added to any ingredient or during the manufacturing process
Footnotes 1. For details, see LEED report generator at usgdesignstudio.com. 2. Fire-rated items: see UL design details. 3. NRC rating is .10. USG does not consider a ceiling panel to be acoustically rated if NRC is less than .50 4. LR values are shown as averages. 5. Field-cut edges of Clean Room panels must be sealed with white latex paint. 6. Clean-room-rated applications require a suspension system with gasketed tee flanges such as Donn CE.
7. High Scrubbability/High Washability– PVC-FREE panels have been tested to withstand 10,000 scrub/wash cycles (ASTM D2486/ASTM D4828) 8. No formaldehyde is added to any ingredient or during the manufacturing process for all gypsum ceiling products manufactured by USG Interiors, Inc.
U.S. Coast Guard acceptance Approved for use on merchant ships.
The following are trademarks of USG Interiors, Inc. Safety First! Follow good safety/industrial hygiene practices or a related company: CE, Clean Room, ClimaPlus, Donn, during installation. Wear appropriate personal protective equipment. DX, DXL, DXLA, Firecode, Sheetrock, USG, ZXLA. Read MSDS and literature before specification and installation.
SC1820/rev. 2-11 © 2011, USG Interiors, Inc. Printed in U.S.A.
DXLA /DXACE ™
™
Ceiling Grid
HRC Year Availability
Features and Benefits
Donn DXLA Suspension System/ Eclipse Firecode Formulation Panels with ClimaPlus Performance
LEED Credits Recycled Content: Up to 51%
MR
Waste Reduction
•
Recycled Content
•
Regional Materials
•
EQ
Rapidly Renewable Materials
Low-Emitting Materials
Daylight and Views
Shadowline Tapered
– ICC-ES evaluated approach to – Meets 2010 Guidelines for Health Care Facilities seismic design installations – 15/16" exposed, fire-rated, system with aluminum cap (ICC-ESR-1222) – Capable of withstanding cleaning and/or disinfecting – Custom color available Eclipse Panels with ClimaPlus Superior onn Brand Fineline Suspension System chemicals as tested in Performance/D accordance with ASTM D5402-06 Applications – No crevices between suspension system and tile – Healthcare facilities, restricted – Maximum economy and design simplicity with UL designs and semi-restricted areas (up to 2 hours) 8 – Fire-rated 8 – Showed superior performance when tested for severe – Food processing areas environmental conditions in accordance with ASTM C635 – Certified to meet ISO 14644-1 – Suitable for use in food processing areas and meets Class 5 (Fed. Standard 209E USDA/FSIS requirements Class 100)9 – Cross-tee override ends resist twisting and give a Acoustical
Performance
Edge Detail
Profile
Square Edge
professionally finished look – Proprietary Quick-Release™ cross tees – White gasket blends with grid and tile9 To order samples, go to usg.com
Flat White
15/16"
15/16"
DXLA
DXACE
Shadowline
Square Edge w/ Gasket
High Recycled Content
Shadowline Beveled
Silver Satin 002
DXLA /DXACE ™
To order samples/literature: – Web: usg.com – E-mail: [email protected] – Fax: 888 874.2348 Technical Services: 800 USG.4YOU
™
Seismic Design Category
Web Sites: usg.com usgdesignstudio.com sustainableceilings.com seismicceilings.com
See usg.com for the most up-to-date product information.
Rated Load 2
AD LO
Length
Height
Intermediate Duty
12'
1.64"
Heavy Duty
12'
1-1/2"
Cross Tee 1"
2'
1"
Cross Tee 1-1/2"
4'
1-1/2"
12'
1-1/2"
Item No.3
Class
Color3
IBC
ICC-ES Evaluated 4' Hanger Installation Spacing
5' Hanger Spacing
Flat White Silver Satin
A-C
7/8" Molding ACM7 Clip
12 lbs./LF
6.1 lbs./LF
Flat White
A-F
7/8" Molding ACM7 Clip
16 lbs./LF
7.3 lbs./LF
16 lbs./LF
7.3 lbs./LF
T
ASTM Class N
C
O M A P L I
System meets or exceeds load compliance specifications per ASTM C635 DXLA 15/16" Tee System
Main Tee
DXLA241
(up to 61% recycled cont.) HRC
DXLA261
(up to 51% recycled cont.) HRC
DXLA2161
Flat White Silver Satin
DXLA4241
Flat White Silver Satin
(up to 51% recycled cont.) HRC
DXACE 15/16" Tee System
Main Tee
Heavy Duty
DXACE26
7
(up to 51% recycled cont.)
Class A
Flat White7
Class A
Flat White7
Class A
Flat White7
HRC
Cross Tee 1-1/2"
2'
1-1/2"
4'
1-1/2"
DXACE2247
(up to 51% recycled cont.) HRC
DXACE4247
(up to 51% recycled cont.) HRC
Wall Angle
Length
Molding
10'
5, 6
1"
Item No.
Color
MC11A25
Flat White
(up to 52% recycled cont.)
Non-Rated
12'
7/8"
M7A
(up to 90% recycled cont.)
Item No.
Color6
12'
M7Z
Flat White Silver Satin
(up to 65% recycled cont.) HRC
7/8"
12'
Flat White
HRC
7/8"
Length
7/8"
HRC
1"
Wall Angle
7/8" 7/8"
M7ACE
(up to 65% recycled cont.)
Flat White
HRC
HRC High Recycled Content Classified as containing greater than 50% total recycled content. Total recycled content is based on product composition of post-consumer and pre-consumer (post-industrial) recycled content per FTC guidelines.
Physical Data/ Footnotes
Product literature & samples Data sheet: AC3036. DXLA Sample: 215675. DXACE Sample: 207901.
For exterior applications, suspension should be reviewed by a structural engineer.
The City of New York BSA and MEA Report Compliance
Health care facilities – No crevice created between suspension system and tile, meets or exceeds requirements for restricted and semi-restricted areas. – Capable of withstanding cleaning and/or disinfecting chemicals as tested in accordance with ASTM D5402-06.
Donn suspension systems have been approved by listing in one or more ICC Evaluation Service, Inc., of the following City of New York Material Report Compliance Board of Standards and Appeals, and Fire-rated, G30 double-web, hot-dipped Suspension systems manufactured Department of Building, Material and galvanized steel body and aluminum cap. by USG Interiors, LLC, have been Equipment Acceptance reports: reviewed and are approved by listing in Recycled content BSA 618-60-SM, BSA 184-77-SM, ICC-ESR-1222. Evaluation Reports are For details, see the LEED report BSA 796-81-SM, MEA 366-93-M, Footnotes subject to reexamination, revision and generator at usgdesignstudio.com. MEA 133-95-M, MEA 312-99-M, 1. Hanger wire spacing and locations possible cancellation. Please Installation MEA 123-00-M. must be per the UL design. refer to usgdesignstudio.com or Must be installed in compliance with 2. Load test data shows uniform load 800 USG.4YOU for current reports. ASTM C635 Standard ASTM C636, ASTM E580, CISCA and in lbs./LF based on simple span tests in L.A. Research Report Compliance for Load Compliance standard industry practices. accordance with ASTM C635 deflection This system meets or exceeds load Donn brand suspension systems limit on L/360. Limitations compliance specifications per ASTM manufactured by USG Interiors, LLC, 3. Some products are available in Severe Environmental Requirements: C635. Main tees will not deflect more have been reviewed and are approved For panels in exposed grids in fire-rated by listing in one or more of the following than 1/8" over a 48" span (or L/360) in metric and custom colors. Call Customer Service for details. and/or high-humidity applications, use L.A. Research Report numbers: 22179, Light Duty, Intermediate Duty or Heavy ZXLA™ suspension systems. Duty categories. 23451, 24095, 25764. Manufactured by USG Interiors, LLC The following are trademarks of USG Interiors, LLC Safety First! Follow good safety/industrial hygiene practices 550 West Adams Street during installation. Wear appropriate personal protective equipment. or a related company: ClimaPlus, Donn, DXL, DXLA, Eclipse, Firecode, Quick-Release, USG, USG in stylized Chicago, IL 60661 Read MSDS and literature before specification and installation. letters, ZXLA.
4. Channel moldings also acceptable in some UL designs. 5. For more information on moldings, see Perimeter Interface selector. 6. Panels must be field-cut to size at the perimeter. For Shadowline detail, field-cut edge must be at least as wide as the factory cut. 7. DXACE available in flat white only. 8. DXLA only. 9. DXACE only.
AC3036/rev. 1-12 © 2012 USG Interiors, LLC Printed in U.S.A.
