Y S 5 05A
Ordering information
On-board type
YS5
Y 1
S 2
5 3
05A 4
1Series name 2Single output 3Output wattage 4Output voltage
R
MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT
YS505A 5.0 5V 1.0A
YS512A 5.4 12V 0.45A
YS505A AC85 - 132 1f or DC110 - 170 0.15typ (Io=100%) 47 - 440 or DC 68typ (Io=100%) 15typ (Io=100%)
YS512A
SPECIFICATIONS
INPUT
OUTPUT
Y
PROTECTION CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND NOISE REGULATIONS
MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] ACIN 100V INRUSH CURRENT[A] ACIN 100V VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] *1 RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] *1 TEMPERATURE REGULATION[mV] 0 to +55C START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[%] HOLD-UP TIME[ms] OVERCURRENT PROTECTION INPUT-FG, OUTPUT OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE
5 12 1 0.45 20max 48max 40max 100max 80max 120max 120max 150max 50max 150max 200max (ACIN 85V, Io=100%) Fixed t5max (Rated input/output, Ta=25 C) 10typ (ACIN 85V, Io=100%) Works over 105% of rating and recovers automatically AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature) -10 to +70C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 30minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with FCC-B
*1 Measured by 20MHz oscilloscope. * Parallel operation with other model is not possible.
G-178
70typ (Io=100%)
YS5 External view
Performance data
¡STATIC CHARACTERISTICS (YS512A)
¡RISE TIME & FALL TIME (YS512A)
Y
20ms/DIV
¡OVERCURRENT CHARACTERISTICS (YS512A)
¡DERATING CURVE
G-179
Ordering information
On-board type
YS10
Y 1
S 2
10 3
05A 4
1Series name 2Single output 3Output wattage 4Output voltage
R
MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT
YS1005A 10.0 5V 2.0A
YS1012A 10.8 12V 0.9A
YS1005A AC85 - 132 1f or DC110 - 170 0.3typ (Io=100%) 47 - 440 or DC 73typ (Io=100%) 15typ (Io=100%)
YS1012A
SPECIFICATIONS
INPUT
OUTPUT
Y
PROTECTION CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND NOISE REGULATIONS
MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] ACIN 100V INRUSH CURRENT[A] ACIN 100V VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] *1 RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] *1 TEMPERATURE REGULATION[mV] 0 to +55C START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[%] HOLD-UP TIME[ms] OVERCURRENT PROTECTION INPUT-FG, OUTPUT OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE
5 12 2 0.9 20max 48max 40max 100max 80max 120max 120max 150max 50max 150max 200max (ACIN 85V, Io=100%) Fixed t5max (Rated input/output, Ta=25 C) 10typ (ACIN 85V, Io=100%) Works over 105% of rating and recovers automatically AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature) -10 to +70C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 30minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with FCC-B
*1 Measured by 20MHz oscilloscope. * Parallel operation with other model is not possible.
G-180
75typ (Io=100%)
YS10 External view
Performance data
¡STATIC CHARACTERISTICS (YS1012A)
¡RISE TIME & FALL TIME (YS1012A)
Y
20ms/DIV
¡OVERCURRENT CHARACTERISTICS (YS1012A)
¡DERATING CURVE
G-181
Ordering information
On-board type
YS15
Y 1
S 2
15 3
05A 4
1Series name 2Single output 3Output wattage 4Output voltage
R
MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT
YS1505A 15.0 5V 3.0A
YS1512A 15.6 12V 1.3A
YS1505A AC85 - 132 1f or DC110 - 170 0.4typ (Io=100%) 47 - 440 or DC 75typ (Io=100%) 25typ (Io=100%)
YS1512A
SPECIFICATIONS
INPUT
OUTPUT
Y
PROTECTION CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND NOISE REGULATIONS
MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] ACIN 100V INRUSH CURRENT[A] ACIN 100V VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] *1 RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] *1 TEMPERATURE REGULATION[mV] 0 to +55C START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[%] HOLD-UP TIME[ms] OVERCURRENT PROTECTION INPUT-FG, OUTPUT OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE
5 12 3 1.3 20max 48max 40max 100max 80max 120max 120max 150max 50max 150max 200max (ACIN 85V, Io=100%) Fixed t5max (Rated input/output, Ta=25 C) 10typ (ACIN 85V, Io=100%) Works over 105% of rating and recovers automatically AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature) -10 to +70C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 30minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with FCC-B
*1 Measured by 20MHz oscilloscope. * Parallel operation with other model is not possible.
G-182
78typ (Io=100%)
YS15 External view
Performance data
¡STATIC CHARACTERISTICS (YS1512A)
¡RISE TIME & FALL TIME (YS1512A)
Y
20ms/DIV
¡OVERCURRENT CHARACTERISTICS (YS1512A)
¡DERATING CURVE
G-183
On-board type
YS5
Y 1
S 2
5 3
05A 4
1Series name 2Single output 3Output wattage 4Output voltage
R
MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT
YS505A 5.0 5V 1.0A
YS512A 5.4 12V 0.45A
YS505A AC85 - 132 1f or DC110 - 170 0.15typ (Io=100%) 47 - 440 or DC 68typ (Io=100%) 15typ (Io=100%)
YS512A
SPECIFICATIONS
INPUT
OUTPUT
Y
PROTECTION CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND NOISE REGULATIONS
MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] ACIN 100V INRUSH CURRENT[A] ACIN 100V VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] *1 RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] *1 TEMPERATURE REGULATION[mV] 0 to +55C START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[%] HOLD-UP TIME[ms] OVERCURRENT PROTECTION INPUT-FG, OUTPUT OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE
5 12 1 0.45 20max 48max 40max 100max 80max 120max 120max 150max 50max 150max 200max (ACIN 85V, Io=100%) Fixed t5max (Rated input/output, Ta=25 C) 10typ (ACIN 85V, Io=100%) Works over 105% of rating and recovers automatically AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature) -10 to +70C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 30minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with FCC-B
*1 Measured by 20MHz oscilloscope. * Parallel operation with other model is not possible.
G-178
70typ (Io=100%)
YS5 External view
Performance data
¡STATIC CHARACTERISTICS (YS512A)
¡RISE TIME & FALL TIME (YS512A)
Y
20ms/DIV
¡OVERCURRENT CHARACTERISTICS (YS512A)
¡DERATING CURVE
G-179
Ordering information
On-board type
YS10
Y 1
S 2
10 3
05A 4
1Series name 2Single output 3Output wattage 4Output voltage
R
MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT
YS1005A 10.0 5V 2.0A
YS1012A 10.8 12V 0.9A
YS1005A AC85 - 132 1f or DC110 - 170 0.3typ (Io=100%) 47 - 440 or DC 73typ (Io=100%) 15typ (Io=100%)
YS1012A
SPECIFICATIONS
INPUT
OUTPUT
Y
PROTECTION CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND NOISE REGULATIONS
MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] ACIN 100V INRUSH CURRENT[A] ACIN 100V VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] *1 RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] *1 TEMPERATURE REGULATION[mV] 0 to +55C START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[%] HOLD-UP TIME[ms] OVERCURRENT PROTECTION INPUT-FG, OUTPUT OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE
5 12 2 0.9 20max 48max 40max 100max 80max 120max 120max 150max 50max 150max 200max (ACIN 85V, Io=100%) Fixed t5max (Rated input/output, Ta=25 C) 10typ (ACIN 85V, Io=100%) Works over 105% of rating and recovers automatically AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature) -10 to +70C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 30minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with FCC-B
*1 Measured by 20MHz oscilloscope. * Parallel operation with other model is not possible.
G-180
75typ (Io=100%)
YS10 External view
Performance data
¡STATIC CHARACTERISTICS (YS1012A)
¡RISE TIME & FALL TIME (YS1012A)
Y
20ms/DIV
¡OVERCURRENT CHARACTERISTICS (YS1012A)
¡DERATING CURVE
G-181
Ordering information
On-board type
YS15
Y 1
S 2
15 3
05A 4
1Series name 2Single output 3Output wattage 4Output voltage
R
MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT
YS1505A 15.0 5V 3.0A
YS1512A 15.6 12V 1.3A
YS1505A AC85 - 132 1f or DC110 - 170 0.4typ (Io=100%) 47 - 440 or DC 75typ (Io=100%) 25typ (Io=100%)
YS1512A
SPECIFICATIONS
INPUT
OUTPUT
Y
PROTECTION CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND NOISE REGULATIONS
MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] ACIN 100V INRUSH CURRENT[A] ACIN 100V VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] *1 RIPPLE[mVp-p] RIPPLE NOISE[mVp-p] *1 TEMPERATURE REGULATION[mV] 0 to +55C START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[%] HOLD-UP TIME[ms] OVERCURRENT PROTECTION INPUT-FG, OUTPUT OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE
5 12 3 1.3 20max 48max 40max 100max 80max 120max 120max 150max 50max 150max 200max (ACIN 85V, Io=100%) Fixed t5max (Rated input/output, Ta=25 C) 10typ (ACIN 85V, Io=100%) Works over 105% of rating and recovers automatically AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature) -10 to +70C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 30minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with FCC-B
*1 Measured by 20MHz oscilloscope. * Parallel operation with other model is not possible.
G-182
78typ (Io=100%)
YS15 External view
Performance data
¡STATIC CHARACTERISTICS (YS1512A)
¡RISE TIME & FALL TIME (YS1512A)
Y
20ms/DIV
¡OVERCURRENT CHARACTERISTICS (YS1512A)
¡DERATING CURVE
G-183
