Zaap TX-2000 Motorized Treadmill
Distributed globally by UK & Europe Shop 247 Units 3 & 4 Lower Park Farm Storrage Lane Alvechurch, Worcestershire B48 7ER United Kingdom Telephone: 01527 598388 USA – West Coast Shop247.com Inc Suite 110-120 16 Sunset Way Henderson, Nevada 89014 Telephone: 1-800-603-0004 USA – East Coast Shop247.com Inc 6965-K Northpark Blvd, Charlotte, North Carolina 28216 Telephone: 1-800-603-0004 AUS/NZ Shop247.com.au Pty Ltd Unit 7/350 Edgar Street Condell Park, NSW 2018 Australia Phone: 1300 795 828
Zaap TX-2000 Motorized Treadmill
51 52 53 54 55 56 57
43 44 45 46 47 48 49 50 1
M12 HEXAGON NUT 2 M8*15 TUMBLER HEXAGON SOCKET 6 HEAD CAP SCREW M12*60 HEXAGONAL SCREW 2 M8*30 TUMBLER HEXAGON SOCKET 1 HEAD CAP SCREW M8 LOCK NUT 6 M6*40 COUNTERSUNK HEAD CROSS SCREW 8 ST3*8 CROSS RECESSED PAN HEAD SCREW 26 M8*55 TUMBLER HEXAGON SOCKET 2 HEAD CAP SCREW 14
M8*50 TUMBLER HEXAGON SOCKET HEAD CAP SCREW ST4*12 LARGE FLAT HEAD CROSS SCREW M8*50MM ALLEN BOLT M8*15MM ALLEN BOLT M8 NUT ALLEN KEY SPANNER
3 19 6 2 2 1 1
43 44
52
45
53
46 47 48 49 50
54 55 56 57
51 13
2
#1, Main Frame * 1pc
#37, Handlebar cover * 2pcs
#53, M8*50mm Allen Bolt * 6pcs
#56, Allen Key* 1pc
#57,Spanner * 1pc
#42, Safety Key * 1pc
#54, #55, M8*15mm Allen Bolt * 2pcs M8 Nut * 2pcs
12 3
11
53
Unfold the handrails and tight the handlebar post with the main frame by screwing 2pcs M8x50mm bolt (53) and 2pcs M8 nuts (55) with the allen key (56) and spanner (57). 4
54 Fix the handlebar post with the main frame by screwing and tight 2pcs M8x15mm bolts (54) with allen key (56).
4
53
Fix the handrails and control panel onto the frame by screwing 4pcs M8x50mm bolt (53) in place. Tighten them with the allen key (56)
5 10
5 37
Cover the bolts with 2pcs handlebar cover (37)
Folding / unfolding the treadmill Turn off the treadmill, turn off the main power switch and pull out the plug. Lift up the running board carefully until hear the click.
Kick to unfold
9
6
SPEED
2
4 PROG
6
8
10
SPEED+
MODE
PULSE /cal
SPEED-
STOP
START
2, 4, 6, 8 or 10 KM/H 7
8
Zaap TX-2000 Motorized Treadmill
51 52 53 54 55 56 57
43 44 45 46 47 48 49 50 1
M12 HEXAGON NUT 2 M8*15 TUMBLER HEXAGON SOCKET 6 HEAD CAP SCREW M12*60 HEXAGONAL SCREW 2 M8*30 TUMBLER HEXAGON SOCKET 1 HEAD CAP SCREW M8 LOCK NUT 6 M6*40 COUNTERSUNK HEAD CROSS SCREW 8 ST3*8 CROSS RECESSED PAN HEAD SCREW 26 M8*55 TUMBLER HEXAGON SOCKET 2 HEAD CAP SCREW 14
M8*50 TUMBLER HEXAGON SOCKET HEAD CAP SCREW ST4*12 LARGE FLAT HEAD CROSS SCREW M8*50MM ALLEN BOLT M8*15MM ALLEN BOLT M8 NUT ALLEN KEY SPANNER
3 19 6 2 2 1 1
43 44
52
45
53
46 47 48 49 50
54 55 56 57
51 13
2
#1, Main Frame * 1pc
#37, Handlebar cover * 2pcs
#53, M8*50mm Allen Bolt * 6pcs
#56, Allen Key* 1pc
#57,Spanner * 1pc
#42, Safety Key * 1pc
#54, #55, M8*15mm Allen Bolt * 2pcs M8 Nut * 2pcs
12 3
11
53
Unfold the handrails and tight the handlebar post with the main frame by screwing 2pcs M8x50mm bolt (53) and 2pcs M8 nuts (55) with the allen key (56) and spanner (57). 4
54 Fix the handlebar post with the main frame by screwing and tight 2pcs M8x15mm bolts (54) with allen key (56).
4
53
Fix the handrails and control panel onto the frame by screwing 4pcs M8x50mm bolt (53) in place. Tighten them with the allen key (56)
5 10
5 37
Cover the bolts with 2pcs handlebar cover (37)
Folding / unfolding the treadmill Turn off the treadmill, turn off the main power switch and pull out the plug. Lift up the running board carefully until hear the click.
Kick to unfold
9
6
SPEED
2
4 PROG
6
8
10
SPEED+
MODE
PULSE /cal
SPEED-
STOP
START
2, 4, 6, 8 or 10 KM/H 7
8
