ZOO booster seat
STEP 3: SECURING HARNESS V1-US
booster seat
ZOO IMPORTANT! KEEP FOR FUTURE REFERENCE. EN Read all instructions before assembly and use of the Booster Seat. CONTENTS: Chair Straps
Attach straps from both sides. You will hear a “click” when buckles lock.
3-point Harness Cushion
To unbuckle, press the button in the middle.
TO ADJUST FIT:
Booster Seat B A
C
A
CLEANING AND CARE: Wipe clean with damp sponge and air dry. STEP 1: ASSEMBLE CHAIR STRAPS
Adult assembly required.
1) Insert “A” straps into slots as shown, so that the “T” ends are inserted fully. Pull to ensure that straps are secured. Adjusters should be visible when assembled to chair.
Strap A
Pull strap end to tighten. Adjust slider until smooth.
DISASSEMBLY
Strap A
Strap B
2) Insert “B” and “C” straps into slots as shown, so that the “T” ends are inserted fully. Pull to ensure that straps are secured.
Strap C
Remove 3 point harness from slots.
STEP 2: ASSEMBLE BOOSTER SEAT TO CHAIR
Remove chair straps from slots.
Pull strap end to tighten. Adjust slider until smooth.
1) Place the booster seat on a chair.
2) Buckle the chair back straps together. You will hear a “click” when buckle locks.
Prevent serious injury or death from sliding out, falls, or tipping over.
3) Buckle the chair bottom straps together. You will hear a “click” when buckle locks.
ALWAYS secure child in the restraint until child is able to get in and out of the booster seat without help (about 2½ years old). NEVER LEAVE THE CHILD UNATTENDED!
MINIMUM ADULT CHAIR DIMENSION REQUIREMENT
NEVER allow a child to push away from the table.
Minimum height of the adult chair backrest should be as high as baby’s head minimum 10 inches high (254 mm).
ALWAYS check the security of fit to adult chair before each use. NEVER use this product on any seat that does not have a seat back.
Minimum Depth 13.50 inches (339 mm)
Prevent serious injury or death. Do not use in motor vehicles. © 2008, 2010, 2014, 2017 Skip Hop 50 W 23 ST, NY, NY 10010 In the US: 877.4.SKIPHOP
Minimum width 15 inches (381 mm)
I WARNING
[email protected] www.skiphop.com Made in China
Meets or exceeds applicable safety standards. Product and colors may vary slightly.
Discontinue use if damaged, broken or any parts are missing.
booster seat
ZOO IMPORTANT! KEEP FOR FUTURE REFERENCE. EN Read all instructions before assembly and use of the Booster Seat. CONTENTS: Chair Straps
Attach straps from both sides. You will hear a “click” when buckles lock.
3-point Harness Cushion
To unbuckle, press the button in the middle.
TO ADJUST FIT:
Booster Seat B A
C
A
CLEANING AND CARE: Wipe clean with damp sponge and air dry. STEP 1: ASSEMBLE CHAIR STRAPS
Adult assembly required.
1) Insert “A” straps into slots as shown, so that the “T” ends are inserted fully. Pull to ensure that straps are secured. Adjusters should be visible when assembled to chair.
Strap A
Pull strap end to tighten. Adjust slider until smooth.
DISASSEMBLY
Strap A
Strap B
2) Insert “B” and “C” straps into slots as shown, so that the “T” ends are inserted fully. Pull to ensure that straps are secured.
Strap C
Remove 3 point harness from slots.
STEP 2: ASSEMBLE BOOSTER SEAT TO CHAIR
Remove chair straps from slots.
Pull strap end to tighten. Adjust slider until smooth.
1) Place the booster seat on a chair.
2) Buckle the chair back straps together. You will hear a “click” when buckle locks.
Prevent serious injury or death from sliding out, falls, or tipping over.
3) Buckle the chair bottom straps together. You will hear a “click” when buckle locks.
ALWAYS secure child in the restraint until child is able to get in and out of the booster seat without help (about 2½ years old). NEVER LEAVE THE CHILD UNATTENDED!
MINIMUM ADULT CHAIR DIMENSION REQUIREMENT
NEVER allow a child to push away from the table.
Minimum height of the adult chair backrest should be as high as baby’s head minimum 10 inches high (254 mm).
ALWAYS check the security of fit to adult chair before each use. NEVER use this product on any seat that does not have a seat back.
Minimum Depth 13.50 inches (339 mm)
Prevent serious injury or death. Do not use in motor vehicles. © 2008, 2010, 2014, 2017 Skip Hop 50 W 23 ST, NY, NY 10010 In the US: 877.4.SKIPHOP
Minimum width 15 inches (381 mm)
I WARNING
[email protected] www.skiphop.com Made in China
Meets or exceeds applicable safety standards. Product and colors may vary slightly.
Discontinue use if damaged, broken or any parts are missing.
