Zoomer Dino Boomer Tail Tip Replacement

Zoomer Dino Boomer Tail Tip Replacement

Zoomer Dino Boomer Tail Tip Replacement If the tail tip of Zoomer Dino Boomer falls off, this guide can be used to replace it.

Written By: Lauren Mannix

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Zoomer Dino Boomer Tail Tip Replacement

INTRODUCTION This guide will assist the reader in replacing the tip of Zoomer Dino Boomer's tail.

TOOLS: Phillips #0 Screwdriver (1) Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Zoomer Dino Boomer Tail Tip Replacement

Step 1 — Tail Tip



Remove the 9.4 mm Phillips #0 screw from the bottom of the tail of Zoomer Dino Boomer.

Step 2



Use the spudger to pry open the two ridges on the last segment of the tail.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Zoomer Dino Boomer Tail Tip Replacement

Step 3



Remove the rubber tail tip from the plastic connector.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 03:29:29 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4