zurich
SUSTAINABLE
upholstery
zurich WIDTH 54" (137 cm) SHOWN RAILROADED CONTENTS 42% cotton, 40% rayon, 16% nylon, 2%
polyester RECYCLED CONTENT 2% post-consumer (polyester) BACKING Acrylic FINISH Nano-Tex™ REPEAT 1.25" (3 cm) horizontal repeat, 4.25" (11 cm)
vertical repeat ABRASION RESISTANCE ASTM D4157: 55,000 double rubs FIRE TEST
Cal TB 117: meets requirements UFAC/NFPA 260: Class I COLORFASTNESS
AATCC-8 Colorfastness to Wet & Dry Crocking: meets requirements AATCC-16 Colorfastness to Light: meets requirements, 40 hours ADDITIONAL TESTS
ASTM D3511/D3511M Pilling: meets requirements ASTM D4034 Seam Slippage: meets requirements ASTM D5034 Breaking Strength and Elongation: meets requirements WARRANTY Material is warranted to be free of defects in workmanship for a period of one year. Materials comply with ACT Standards and are suitable for the intended use. CLEANING CODE S (solvent or dry cleaning products) ~ To prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is recommended. Spot clean using a mild water-free solvent or dry cleaning product. Clean only in a well ventilated room and avoid any product containing carbon tetrachloride which is highly toxic. Pretest small area before proceeding. CUSTOM COLORS AVAILABLE MADE IN THE USA THIS FABRIC MEETS OR EXCEEDS ACT STANDARDS
ŃßøÍ
© 2012 Wall Source LLC
upholstery
zurich WIDTH 54" (137 cm) SHOWN RAILROADED CONTENTS 42% cotton, 40% rayon, 16% nylon, 2%
polyester RECYCLED CONTENT 2% post-consumer (polyester) BACKING Acrylic FINISH Nano-Tex™ REPEAT 1.25" (3 cm) horizontal repeat, 4.25" (11 cm)
vertical repeat ABRASION RESISTANCE ASTM D4157: 55,000 double rubs FIRE TEST
Cal TB 117: meets requirements UFAC/NFPA 260: Class I COLORFASTNESS
AATCC-8 Colorfastness to Wet & Dry Crocking: meets requirements AATCC-16 Colorfastness to Light: meets requirements, 40 hours ADDITIONAL TESTS
ASTM D3511/D3511M Pilling: meets requirements ASTM D4034 Seam Slippage: meets requirements ASTM D5034 Breaking Strength and Elongation: meets requirements WARRANTY Material is warranted to be free of defects in workmanship for a period of one year. Materials comply with ACT Standards and are suitable for the intended use. CLEANING CODE S (solvent or dry cleaning products) ~ To prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is recommended. Spot clean using a mild water-free solvent or dry cleaning product. Clean only in a well ventilated room and avoid any product containing carbon tetrachloride which is highly toxic. Pretest small area before proceeding. CUSTOM COLORS AVAILABLE MADE IN THE USA THIS FABRIC MEETS OR EXCEEDS ACT STANDARDS
ŃßøÍ
© 2012 Wall Source LLC
