1050RN - Platt Electric Supply
1050RN
Lytecaster, 5", CFL, IC, Round, I Lt., FIK
Page 1 of 2
2
Height = 3 1/2" (89 mm) Aperture Opening = 5 5/16" (135 mm) Dia. Top View
5
1
4 2 6,7
Frame-In-Kit
3
Reflector Trim
13" Min (330 mm) 24" Max (610 mm)
14" (356 mm) Overall Length 11 5/8" (295 mm) Overall Length 8 5/16" (211 mm)
8 1/4" (210 mm) Overall Width
Complete fixture consists of frame-in kit and reflector trim. Select each separately. Xceed frame-in kit
Xceed compact fluorescent lensed round reflector Trims
Frame-in kit sku
Lensed downlight
1050RN13ES*
13w Triple GX24q-1Base, 120v - 0.25 amp max 1050RN18ES*
18w Triple GX24q-2 Base, 120v - 0.34amp max 1050RN26ES*
Lensed slope/wall wash
1050RNDLWB
1050RNDLFGWB
1050RNSLWWB
1050RNSLWFGWB
1050RNDLCDW
1050RNDLFGCDW
1050RNSLWCDW
1050RNSLWFGCDW
1050RNDLCDP
1050RNDLFGCDP
1050RNSLWCDP
1050RNSLWFGCDP
1050RNDLWDW
1050RNDLFGWDW
1050RNSLWWDW
1050RNSLWFGWDW
1050RNDLWDP
1050RNDLFGWDP
1050RNSLWWDP
1050RNSLWFGWDP
1050RNDLWC
1050RNDLFGWC
1050RNSLWWC
1050RNSLWFGWC
ENERGY STAR
26w Triple GX24q-3Base, 120v - 0.40 amp max *All frames come standard with preset mounting screws and a 2700k lamp. Models are available with preset nails and/or a 3500k lamp (13es = 2700k only). Simply add an n and/or 35 to the end of the model number for those options.
Job Information Type: Job Name: Cat. No.: Notes:
1050RN
Lytecaster, 5", CFL, IC, Round, I Lt., FIK
Page 2 of 2
Features
Features (continued)
1. Housing: .026" (#23ga.) galvanized steel. UL listed for direct contact with thermal insulation. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or 75Pa), which complies with Title 24, the International Energy Conservation Code, and Washington State Energy Code (Section 502.4). This reduces heat loss and condensation in ceiling. Access door for inspection of junction box. 2. Lower frame and top cover: .026" (#23 ga.) galvanized steel. Accommodates ceilings up to 1 1/2" thick. 3/8" deep integral lip with four notches at 90 degrees apart to simplify
6. Socket: NEW TWIST & LOCK Four-pin base, molded thermoplastic socket, prewired with No. 18 AWM leads to ballast. 7. Socket Bracket: .048" (#18ga.) Galvanized Steel. Designed to be easily adjusted to accommodate 3/8" to 1 1/2" ceiling thickness. Three positions available for any installation orientation of Wall Washers Slope ceiling, or Wall mount application. Ensures Unitized optics. Reflector trim is secured to upper portion of socket bracket to ensure a tight to ceiling installatio
alignment. Locks into position along length of mounting bars with locking screws. Indicator lines on housing top and sides to simplify alignment. 3. Junction box: 2.5" X 5 3/8" X 2" (27 cu. in) .032" (#21 ga.) galvanized steel. UL listed 90°C supply conductors. Rated for branch circuit wiring supplying connected luminaires (daisy chaining). 4. Mounting bars: .059" (#16 ga.) galvanized steel. Bars pivot for easy attachment and wire-in below ceiling line. Bars extend to accommodate 16" to 24" O.C. joist spacing. Bars can accommodate 12" O.C. Joist spacing after a slight field modification (see Instruction Sheet). Features integral self tapping phillips/square drive SCREWS for secure attachment to wood or metal construction. Also available with integral NAILS. Attaches to T-bar ceilings without the need of accessories. Bars installed on shortest dimension of frame, but can be easily repositioned 90 degrees from original position. 5. Ballast: Mounted inside Junction Box. 120V NPF Energy Star ® approved Electronic Ballast. Instant start with end of lamp life protection, class “P” thermal protection with a class “A” sound rating. Ballast easily accessible for inspection. Minimum Starting Temperature is 0°F (-17C).
Philips Lightolier e: [email protected] t: (508) 679-8131 w: www.lightolier.com
Recommended Lamping Lightolier recommends the following Philips lamps: 943269: PLT 13W – 2700K = PHILIPS #228189 943270: PLT 18W – 2700K = PHILIPS #38437-0 943271: PLT 18W – 3500K = PHILIPS #26820-1 943272: PLT 26W – 2700K = PHILIPS #38440-4 943273: PLT 26W – 3500K = PHILIPS #26824-3 Labels cULus Listed Type I.C., Suitable for Damp Location, Complies with Air Leakage Requirements stated in the Title 24, International Energy Conservation code and Washington State Energy Code. AirSeal ® is a registered trademark of Lightolier.
Job Information Type:
1050RN October 19, 2010 Specifications are subject to change without notice. © Koninklijke Philips Electronics N.V., 2010. All rights reserved.
Lytecaster, 5", CFL, IC, Round, I Lt., FIK
Page 1 of 2
2
Height = 3 1/2" (89 mm) Aperture Opening = 5 5/16" (135 mm) Dia. Top View
5
1
4 2 6,7
Frame-In-Kit
3
Reflector Trim
13" Min (330 mm) 24" Max (610 mm)
14" (356 mm) Overall Length 11 5/8" (295 mm) Overall Length 8 5/16" (211 mm)
8 1/4" (210 mm) Overall Width
Complete fixture consists of frame-in kit and reflector trim. Select each separately. Xceed frame-in kit
Xceed compact fluorescent lensed round reflector Trims
Frame-in kit sku
Lensed downlight
1050RN13ES*
13w Triple GX24q-1Base, 120v - 0.25 amp max 1050RN18ES*
18w Triple GX24q-2 Base, 120v - 0.34amp max 1050RN26ES*
Lensed slope/wall wash
1050RNDLWB
1050RNDLFGWB
1050RNSLWWB
1050RNSLWFGWB
1050RNDLCDW
1050RNDLFGCDW
1050RNSLWCDW
1050RNSLWFGCDW
1050RNDLCDP
1050RNDLFGCDP
1050RNSLWCDP
1050RNSLWFGCDP
1050RNDLWDW
1050RNDLFGWDW
1050RNSLWWDW
1050RNSLWFGWDW
1050RNDLWDP
1050RNDLFGWDP
1050RNSLWWDP
1050RNSLWFGWDP
1050RNDLWC
1050RNDLFGWC
1050RNSLWWC
1050RNSLWFGWC
ENERGY STAR
26w Triple GX24q-3Base, 120v - 0.40 amp max *All frames come standard with preset mounting screws and a 2700k lamp. Models are available with preset nails and/or a 3500k lamp (13es = 2700k only). Simply add an n and/or 35 to the end of the model number for those options.
Job Information Type: Job Name: Cat. No.: Notes:
1050RN
Lytecaster, 5", CFL, IC, Round, I Lt., FIK
Page 2 of 2
Features
Features (continued)
1. Housing: .026" (#23ga.) galvanized steel. UL listed for direct contact with thermal insulation. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or 75Pa), which complies with Title 24, the International Energy Conservation Code, and Washington State Energy Code (Section 502.4). This reduces heat loss and condensation in ceiling. Access door for inspection of junction box. 2. Lower frame and top cover: .026" (#23 ga.) galvanized steel. Accommodates ceilings up to 1 1/2" thick. 3/8" deep integral lip with four notches at 90 degrees apart to simplify
6. Socket: NEW TWIST & LOCK Four-pin base, molded thermoplastic socket, prewired with No. 18 AWM leads to ballast. 7. Socket Bracket: .048" (#18ga.) Galvanized Steel. Designed to be easily adjusted to accommodate 3/8" to 1 1/2" ceiling thickness. Three positions available for any installation orientation of Wall Washers Slope ceiling, or Wall mount application. Ensures Unitized optics. Reflector trim is secured to upper portion of socket bracket to ensure a tight to ceiling installatio
alignment. Locks into position along length of mounting bars with locking screws. Indicator lines on housing top and sides to simplify alignment. 3. Junction box: 2.5" X 5 3/8" X 2" (27 cu. in) .032" (#21 ga.) galvanized steel. UL listed 90°C supply conductors. Rated for branch circuit wiring supplying connected luminaires (daisy chaining). 4. Mounting bars: .059" (#16 ga.) galvanized steel. Bars pivot for easy attachment and wire-in below ceiling line. Bars extend to accommodate 16" to 24" O.C. joist spacing. Bars can accommodate 12" O.C. Joist spacing after a slight field modification (see Instruction Sheet). Features integral self tapping phillips/square drive SCREWS for secure attachment to wood or metal construction. Also available with integral NAILS. Attaches to T-bar ceilings without the need of accessories. Bars installed on shortest dimension of frame, but can be easily repositioned 90 degrees from original position. 5. Ballast: Mounted inside Junction Box. 120V NPF Energy Star ® approved Electronic Ballast. Instant start with end of lamp life protection, class “P” thermal protection with a class “A” sound rating. Ballast easily accessible for inspection. Minimum Starting Temperature is 0°F (-17C).
Philips Lightolier e: [email protected] t: (508) 679-8131 w: www.lightolier.com
Recommended Lamping Lightolier recommends the following Philips lamps: 943269: PLT 13W – 2700K = PHILIPS #228189 943270: PLT 18W – 2700K = PHILIPS #38437-0 943271: PLT 18W – 3500K = PHILIPS #26820-1 943272: PLT 26W – 2700K = PHILIPS #38440-4 943273: PLT 26W – 3500K = PHILIPS #26824-3 Labels cULus Listed Type I.C., Suitable for Damp Location, Complies with Air Leakage Requirements stated in the Title 24, International Energy Conservation code and Washington State Energy Code. AirSeal ® is a registered trademark of Lightolier.
Job Information Type:
1050RN October 19, 2010 Specifications are subject to change without notice. © Koninklijke Philips Electronics N.V., 2010. All rights reserved.
