11x17 cover (Page 1)
Safety Tools & Products Safety Tools to 1000 VAC Insulation Products to 40,000 VAC
Electro Safe
®
12102 Conway Road • Beltsville, MD 20705 Tel: (800) 443-1196 • (301) 210-0215 • Fax: (301) 210-0217 E-mail [email protected] • www.insulatedtools.com
Certified Insulated Products
Certified Insulated Products
Pliers, Cutters Linesman Pliers
ASTM F1505 Standard Code#
10000 10003 10005 10006 10007
Cable Cutters
Length
Code# Length
75⁄16" Standard 81⁄2" Standard 91⁄4" Premium 91⁄4" Standard 91⁄4" Standard w/ Crimper
10040 10041* 10042
Capacity
9 ⁄2" 4/0 Alum, 2/0 Copper 10" 4/0 Alum, 2/0 Copper 8" 2/0 Alum, 2/0 Copper 1
* Easily slices up to 100-pair telephone cable
• New England style, high leverage
Needle Nose Pliers Code#
Length
10008 10010 10013 10014 10016
4" 6" 71⁄2" 7" 8"
• High leverage Bent Nose
Ratcheting Cable Cutter
• Side cutting feature
Code#
10048
Flat Nose Pliers Code#
Length
10020
6"
Code#
Length
Capacity
10066 10068 10070 10071 10073 10075
4" 6" 10" 10" 12" 12"
⁄2" ⁄8" 11⁄2" 11⁄2" 2" 2"
• Duck bill
Water Pump Pliers 1 7
Box Joint Box Joint
• • • • • •
Cuts copper communications cable up to 3" (76 mm) in diameter Compact, lightweight, weighs only 3 lbs. (1.13 kg.) Easy to use, one-handed operation Release lever disengages ratchet, allowing blades to open even in mid-cut Safety latch locks blades in closed position for storage Features a rubber boot to lodge stationary handle against work surface to multiply manual effort
Note: This tool should never be used to cut steel or steel reinforced cable.
• Positive locking design
Diagonal Cutting Pliers
Slip Joint Pliers Code#
Length
10050 10052
8" 10"
Code#
Length
10028 10030 10033 10034
4" 6" 7" 8"
Code#
Length
10039
7"
• Standard bevel cutting knives • Milled teeth & jaws
Plastic Pliers Crimping Pliers Code#
Length
Capacity
10060
10"
#10–22 AWG
Other
• Fiberglass
• Wire cutter built into base • For insulated and non-insulated terminals
Adjustable Wrenches Code#
10090 10092 10094 10096 10098
Length Jaw Opening
6" 8" 10" 12" 15"
• WARNING: Not 1000V Rated. Does not meet ASTM standards for insulated tools.
1
⁄4" ⁄16" 11⁄8" 5 1 ⁄16" 111⁄16" 3
15
The insulation consists of a textured orange layer over the inner yellow layer. If the inner layer of insulation becomes visible through the orange, the tool must be immediately removed from service.
Strippers, Crimpers, Wrenches
ASTM F1505 Standard Stripper & Crimping Pliers
Hexagon Wrench Code#
Capacity
Length
10080 #10–22 AWG 10081 #8–30 AWG 10082 #10–28 AWG 10084 #10–18 AWG Solid 10085 #10–22 AWG 10087 #10-18 AWG
10080
81⁄4" 7" 61⁄2 V-notch 61⁄2" 61⁄2" In-line STRANDED
Code#
• Long arm Sets Code# Pcs.
Sizes
10141 10142 10144
5
7 10 14
⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", 1⁄4" ⁄16" thru 3⁄8", w/o 7⁄64" & 9⁄64" 1 ⁄16" thru 1⁄2" 1
10081 Metric Sets
10084
Code# Pcs.
Sizes
01042 01044 01064 01065 01046 01048
1.5 mm thru 10 mm w/o 7 & 9 mm 1.5 mm thru 10 mm w/o 9 mm 1.5 mm thru 10 mm w/o 7 mm 1.5 mm thru 10 mm 1.5mm thru 13mm 1.5mm thru 24mm
9 10 10 11 13 18
10123 10124 10125 10126 10127 10128 10129 10130 10131 10132 10134 10136 10138 10140 10145 10146 10147 10148 10149
Size
Code#
Size
⁄16" 5 ⁄64" 3 ⁄32" 7 ⁄64" 1 ⁄8" 9 ⁄64" 5 ⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 3 ⁄4" 7 ⁄8" 1"
01050 01051 01052 01053 01054 01055 01056 01057 01058 01059 01060 01061 01062 01063 01066 01067 01068 01069
1.5 mm 2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 12mm 13mm 14mm 17mm 19mm 22mm 24mm
1
“T” Handle Hexagon Wrench
10085
Code#
10105 10106 10107 10108 10109 10110 10111 10112 10114 10116 10117 10118 10119
“T” Handle Hexagon Socket Wrench
• Overall length 10" • Handle length 8"
Code#
Size
10150 10152 10154 10156 10158 10160 10162 10164 10165 10166 10167
⁄8" ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 3
7
01002 01003 01004 01005 01006 01007 01008 01009 01010 01011 01012 01014 01016 01018 01020 01022 01024 01026 01028 01030 01032
Code#
Size
⁄32" 7 ⁄64" 1 ⁄8" 9 ⁄64" 5 ⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16"
01070 01071 01072 01073 01074 01075 01076 01077 01078 01079
2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm
3
• Heat treated for strength • 6" length
Pipe Wrench Code#
Size
Sets Size
⁄16" ⁄32" 3 ⁄8" 13 ⁄32" 7 ⁄16" 15 ⁄32" 1 ⁄2" 17 ⁄32" 9 ⁄16" 19 ⁄32" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 11⁄16" 11⁄8" 11⁄4" 11⁄2" 5
11
Code#
00970 00971 00972 00973 00974 00975 00976 00977 00978 00979 00980 00981 00982 00983 00984 00985 00986 00987 00988 00989 00990
Size
5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm
Code#
00991 00992 00993 00994 00995 00996 00997 00998 00999 01000 01001
Size
26 mm 27 mm 28 mm 29 mm 30 mm 31 mm 32 mm 33 mm 34 mm 35 mm 36 mm
Code# Pcs.
Sizes
01090 01092 10120 10122 10101 10102 10103 10104
2 thru 10 mm w/o 7 & 9mm 2 thru 10mm 1 ⁄8" thru 3⁄8" 3 ⁄32" thru 3⁄8" 1 ⁄8" thru 1⁄2" 1 ⁄8" thru 9⁄16" 3 ⁄32" thru 1⁄2" 3 ⁄32" thru 9⁄16"
8 10 8 10 10 11 12 13
2" Plug Wrench Code#
Length
10430
2"
• Remove and install screw plugs with raised “D” in fuse socket
⁄2" Dr. Current Transformer Bar
1
Code#
10169
Moisture and surface contaminents are conductive, so it is imperative that insulated tools be kept clean, dry, and free of surface contaminents.
2
Wrenches
ASTM F1505 Standard
Geared Style Box Wrenches
Fuse Puller Code#
10440
Code#
Size
Code#
Size
0442 10443 0444 0445 10446 10447 10448 10449 10450 10451 10452 10453
⁄16" ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1"
10478 10479 10481 10483 10484 10486 10487 10489 10491 10492 10494
8mm 9mm 11mm 13mm 14mm 16mm 17mm 19mm 21mm 22mm 24mm
5
3
Insulated Knife & Sheath
Code#
Pcs
Blade
Sickle Straight
14300
• Fiberglass
Torque Wrenches / Screwdrivers Wrenches
Sets
10454 10455 10456 10498
Code#
14299 14300
Sizes
5 9 ⁄16" thru 13⁄16" 5 ⁄16" thru 7⁄8" 10 5 12 ⁄16" thru 1" 11 8mm thru 24mm
Code#
Range
Length
10173 10184 10185 10185S 11184 10186 10187
30 – 150"# 30 – 150"# 150 – 750"# 15’# – 75’# 50 – 250"# 150 – 750"# 30'# – 150'#
10" 10" 15" 15" 13" 15" 19"
Code#
Length
10410 10411 10412
7" 83⁄8" 91⁄2"
Size
⁄8" x 7⁄16" 9 ⁄16" x 3⁄4" 3 ⁄4" x 7⁄8" 3
Code#
Range
Length
10174 10175 10176
1 – 30"oz 2 – 36"oz 2 – 100"oz
63⁄8" 63⁄8" 63⁄8"
10177
• Ratcheting • Provides separation between the ratchet ends to eliminate accidental contacts on low voltage installations
Code#
Code# Pcs.
Sizes
10431 10433
1
9 10
3
Code#
Size
10421 10422 10423 10424 10425 10426 10427 10428 10429 10432
⁄4" ⁄16" ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 7 ⁄8"
⁄4" Hex to 1⁄4" Sq. Dr. Adapter
1
Reversible Ratchet
Ratcheting Wrenches
Sets
⁄4" ⁄8" 3 ⁄8" 3 ⁄8" 3 ⁄8" 1 ⁄2" 1 ⁄2" 1
Screwdrivers
Connector Wrenches
• Metric and larger sizes available upon request
Drive
10178 10180 10182 10470
1
Drive
Length
⁄4" 3 ⁄8" 1 ⁄2" 3 ⁄4"
6" 7" 10" 24"
1
5
3
• Raised lever allows reversing while wearing gloves • Extensions bars are required
Extension Bars Code#
10168 10189 10191 10188 10190 10192 10193 10194 10196
⁄4" thru 3⁄4" 1 ⁄4" thru 5⁄8"
Drive
Length
⁄2" 1 ⁄4" 1 ⁄4" 3 ⁄8" 3 ⁄8" 3 ⁄8" 1 ⁄2" 1 ⁄2" 1 ⁄2"
20" 2" 6" 3" 6" 12" 2 1⁄2" 5" 10"
Drive
Length
⁄8" 1 ⁄2"
9" 12"
1
Breaker Bar Code#
10197 10198
3
3
Even though the tools are tested to 10,000 volts A.C., always inspect your tools before using them.
Sockets, Accessory Tools
ASTM F1505 Standard Hexagon Sockets
Socket & Ratchet Sets
⁄2" Drive
1
⁄8" Drive
3
Standard Depth
Deep Depth
Standard Depth
Deep Depth
Code#
Size
Code#
Size
Code#
Size
Code#
Size
10200 10201 10202 10204 10206 10208 10210 10212 10214 10216 10217 10218 10221
⁄16" ⁄4" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 15 ⁄16" 7 ⁄8" 1"
10220 10222 10224 10226 10228 10230 10232 10233 10234 10267
⁄8" ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 11⁄2"
10240 10242 10244 10246 10248 10250 10252 10254 10256 10258 10260 10262 10264 10266 10268 10269
⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 1 1 ⁄16" 11⁄8" 11⁄4" 1 3⁄8" 15⁄8"
10270 10272 10274 10276 10278 10280 10282 10284 10286 10288 10290 10292 10294 10295
⁄8" ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 1 1 ⁄16" 11⁄8" 11⁄4"
5
1
3
7
Other ranges available, see Price Sheet for details. Code#
Drive
01100–01126 01140–01157 01167–01182 01266–01282 01192–01214
1
⁄4" ⁄4" 3 ⁄8" 3 ⁄8" 1 ⁄2" 1
Range
Depth
3
3
7
⁄32" – ⁄16" STD 4mm–13mm STD 7mm–22mm STD 6mm–22mm DEEP 10mm–32mm STD 5
9
Male Hexagon Adapter ⁄4" Dr. - 2" Length
1
Code#
Sets Code# Pcs. Drive
01241 01261 01262 01263 01230 01301
6 4 7 9 8 7
Sizes
⁄4" 1⁄8" – 5⁄16" ⁄8" 1⁄4", 5⁄16", 3⁄8", 7⁄16" 3 ⁄8" 1⁄8" – 1⁄2", w/o 5⁄32" & 7⁄32" 3 ⁄8" 1⁄8" – 1⁄2" 1 ⁄2" 1⁄4" – 3⁄4" 4mm - 10mm 1 3
⁄8" Dr. - 21⁄4" Length
3
Code#
Size "
01294 01295 01296 01297 01298 01299 01300
4mm 5mm 6mm 7mm 8mm 9mm 10mm
01231 01232 01234 01236 01238 01240
Size
⁄8" ⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 1
5
10199
11198 Code#
Pcs.
01130 01131 01132 01138 01160 01188 01190 01215 01216 01283 01284 10179 10181 10183 10199 10219 10238 10239 11198
11 11 12 17 14 15 13 17 15 13 19 12 9 14 12 10 9 12 25
11199 11200 11215
11 11 10
⁄8" Dr. - 21⁄4" Length
3
Code#
01244 01246 01248 01250 01252 01254 01256 01258 01260
Size
⁄8" ⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 1
Description
⁄4" Dr. 6 Pt. Socket Set, 5⁄32" thru 9⁄16" ⁄4" Dr. Ratchet, 2" Ext., Sockets 7⁄32" thru 9⁄16" 1 ⁄4" Dr. Ratchet, 2" Ext., Sockets 3⁄16" thru 9⁄16" 1 ⁄4" Dr. Ratchet, 2" Ext., Sockets 3⁄16" thru 9⁄16", Male Hex Bits 1⁄8" thru 5⁄16" 1 ⁄4" Dr. Ratchet, 2" Ext., Sockets 4mm thru 12mm 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 10mm thru 22mm 3 ⁄8" Dr. Deep Metric Socket Set 10mm thru 22mm 1 ⁄2" Dr. Ratchet, 5" Ext., Sockets 10mm thru 32mm 1 ⁄2" Dr. Socket Set, 10mm thru 32mm 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 10mm thru 19mm & 22mm 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 6mm thru 22mm 1 ⁄4" Dr. Ratchet, 2" Ext., Sockets 3⁄16" thru 1⁄2" 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 3⁄8" thru 3⁄4" 1 ⁄2" Dr. Ratchet, 5" Ext., Sockets 3⁄8" thru 1" & Breaker Bar 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 5⁄16" thru 7⁄8" 3 ⁄8" Dr. Sockets 5⁄16" thru 7⁄8" 3 ⁄8" Dr. Ratchet, 3" Ext., Deep Sockets 3⁄8" thru 3⁄4" 3 ⁄8" Dr. Ratchet, 3" & 6" Ext., Sockets 3⁄8" thru 7⁄8" 1 ⁄2" Dr. Ratchet, 5" Ext., 8" “T” Handle, Sockets 3⁄8" thru 1 1⁄4", Male Hex Bits 1⁄4" thru 3⁄4" 3 ⁄8" Dr. Ratchet, 3" & 6" Ext., Sockets 3⁄8" thru 13⁄16" 3 ⁄8" Dr. Ratchet, 3" and 6" Ext., Deep Sockets 3⁄8" thru 13⁄16" 3 ⁄8" Dr. Metric Socket Set, 10mm thru 19mm 1 1
5
Substation Roll
⁄2" Dr. - 23⁄4" Length
1
Code#
01218 01219 01220 01222 01224 01226 01228 01229
Size
⁄4" ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 3 ⁄4" 1
5
4" length add “L” to Code# (1⁄2" Dr. only)
Tools are laser marked for permanent identification.
Code#
Description
13432 13433
Composite Sub-Station Tool Roll #13352 & Roll #13360 Composite Sub-Station Tool Roll #13353 & Roll #13360
4
Screwdrivers, Switchboard Matting, Accessory Tools Switchboard Corrugated Matting
European Style Drivers
• ASTM D178-93 Type 1 Insulating—Non-Oil Resistant
Slotted SD
Switchboard matting is rubber matting designed for electrical insulation, as a floor covering to prevent shock around high voltage electrical apparatus, fuse boxes, switchgear, control panels, and heavy machinery. It meets and exceeds current ASTM, ANSI, (plus IEC Division of ANSI, Tech. Committee-78) specifications for this material. In addition, OSHA requirement’s intent to eliminate the electrical hazards of high voltage shock in the workplace is abundantly clear. CIP switchboard matting is designed specifically for this purpose. IT IS NOT DESIGNED TO BE USED AS A “HOT” RAIL BLANKET. ALSO, MATTING WITH PUNCTURES OR CRACKS SHOULD NOT BE PLACED IN SERVICE. Code#
20531 20532 20533 20534 20541 20542 20543 20544 20551 20552 20553 20554
Dielectric Test Voltage
20,000 20,000 20,000 20,000 30,000 30,000 30,000 30,000 40,000 40,000 40,000 40,000
Thickness 3
⁄16" ⁄16" 3 ⁄16" 3 ⁄16" 1 ⁄4" 1 ⁄4" 1 ⁄4" 1 ⁄4" 3 ⁄8" 3 ⁄8" 3 ⁄8" 3 ⁄8" 3
Size
Class
Max. Use Voltage
36" x 12" 36" x 24" 36" x 36" 36" x 48" 36" x 12" 36" x 24" 36" x 36" 36" x 48" 36" x 12" 36" x 24" 36" x 36" 36" x 48"
1 1 1 1 2 2 2 2 3 3 3 3
7,500 7,500 7,500 7,500 17,000 17,000 17,000 17,000 26,500 26,500 26,500 26,500
Phillips SD Size
Code#
Size
⁄32" X 3" 5 ⁄32" X 4" 3 ⁄16" X 5" 1 ⁄4" X 6" 5 ⁄16" x 7" 3 ⁄8" x 8"
13080 13082 13084 13086
#0 x 21⁄2" #1 x 3" #2 x 4" #3 x 6"
Code#
13070 13072 13074 13076 13077 13078
3
Metric Nutdrivers Code#
05300 05305 05310 Screwdriver Sets 05315 Code# Pcs. Sizes 05320 13090 8 3⁄32" x 3", 5⁄32" x 4", 3⁄16" x 5", 1⁄4" x 6", 05325 05330 #0 x 21⁄2", #1 x 3", #2 x 4", 05335 Voltage Tester 05340
Size
5.5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm 13mm
Voltage Tester Code#
13088
Metric Nut Drivers
Composite Nut Starter
• Fiberglass composite (non-conductive) shaft • Magnetic on opposite end to help retrieve fasteners Code#
Description
00563 Composite Nut Starter
Length
7"
Capacity
4-40 (2.5mm) to 5⁄16" (8mm)
Insulated Inspection Mirror Code#
14301 14303
• 14" long with 21⁄4" adjustable mirror • 15" long with 31⁄4" adjustable mirror
Code#
Description
Size
Length
05300 05305 05310 05315 05320 05325 05330 05335 05340
Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver
5.5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm 13mm
125mm 125mm 125mm 125mm 125mm 125mm 125mm 125mm 125mm
Nutdriver Sets Code# Pcs.
Sizes
05370
5.5mm thru 13mm
9
Offset Screwdriver Slotted
Insulated Adjustable Magnetic Retrieving Tool Code#
14302
• 18" handle
5
• Torx see Code #00590 thru #00603 in Price Sheet
Phillips
Code#
Size
Code#
Size
00564 00566 00568 00570 00572 00574 00576
2-4 x 3" 4-6 x 3" 6-8 x 41⁄4" 8-10 x 41⁄4" 10-12 x 5" 12-14 x 6" 14-16 x 6"
00578 00580 00582
#1 x 43⁄4" #2 x 51⁄2" #3 x 6"
No energized work should be done without a written and approved procedure.
ASTM F1505 Standard
Composite Tools
COMPOSITE TOOLS Leading Edge Technology Manufactured from braided, military grade fiberglass composite over a tough polymer core, Composite Tools combine the latest in space age materials technology with traditional heat treated steel tips in a unique family of products ideal for the safety-minded professional tool user.
• Inherent safety—the insulating properties are built into the tool, not coated onto it • Lightweight • Better balanced • Exceeds ASME torque standards • Exceeds the strength of the proper fastener • One year warranty
\COMPOSITE COMPOSITE SCREWDRIVERS
COMPOSITE NUT DRIVERS
• • • •
Cushion grip Slotted electrician’s tip Phillips tip Robertson tip
Code#
Size
00813 00814 00820 00822 00823 00844 00846 00847 00848 00849 00850
⁄8" x 3" ⁄8" x 6" 1 ⁄4" x 7" 5 ⁄16" x 41⁄2" 5 ⁄16" x 7" 3 ⁄16" x 5" 3 ⁄16" x 6" 1 ⁄4" x 41⁄2" 1 ⁄4" x 6" 5 ⁄16" x 6" 3 ⁄8" x 7"
6" Length
3" Length
Slotted Tip
1 1
• Cushion grip • Hollow hexagon shaft • 3" and 6" shaft lengths
Code#
Size
Code#
Size
00880 00881 00882 00883 00884 00885 00886 00887 00888 00889 00890
⁄16" 7 ⁄32" 1 ⁄4" 9 ⁄32" 5 ⁄16" 11 ⁄32" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8"
00891 00892 00893 00894 00895 00896 00897 00898 00899 00900 00901
⁄16" ⁄32" 1 ⁄4" 9 ⁄32" 5 ⁄16" 11 ⁄32" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8"
3
3 7
Sets Phillips Tip
Robertson Tip
Code#
Size
Code#
Size
00851 00852 00853 00856 00858 00859 00952
#0 x 3" #1 x 5" #0 x 6" #2 x 41⁄2" #2 x 7" #3 x 6" #1 x 3"
00860 00861 00862 00864 00866 00868
#0 x 3" #0 x 6" #1 x 5" #2 x 41⁄2" #2 x 6" #3 x 7"
3" Code# 6" Code# Pcs. Sizes
00920 00921 00922 00923
00925 00926 00927 00928
7 8 9 10
⁄16", 1⁄4", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" ⁄16", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" 3 ⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" 3 ⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2", 9⁄16" 3 3
COMPOSITE MALE HEXAGON DRIVERS 6" Length
3" Length Screwdriver Sets Code# Code# Pcs.
Sizes
00871 00869 00870 00872
#1, #2, 1⁄8" x 3", 3⁄16" x 6", 1⁄4" x 6", 5⁄16" x 6" #1, #2, 1⁄8" x 3", 1⁄8" x 6", 3⁄16" x 6", 1⁄4" x 6", 5⁄16" x 6", 3⁄8" x 7" #1, #2, #3, 1⁄8" x 3", 1⁄8" x 6", 3⁄16" x 5", 3⁄16" x 6", 1⁄4" x 41⁄2", 1⁄4" x 6", 5⁄16" x 6", 3⁄8" x 7" #2, #3, 3⁄16" x 6", 1⁄4" x 6", 3⁄8" x 7"
6 8 11 5
Sets 3" Code# 6" Code# Pcs. Sizes
00633 00634
00653 00654
4 6
⁄16", 1⁄4", 5⁄16", 3⁄8" ⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8"
3 5
00620 00621 00622 00623 00625 00627
Size
Code#
⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8"
00640 00641 00642 00643 00645 00647
5
Size
⁄32" ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8" 5 3
COMPOSITE HOLDING SCREWDRIVERS & NUT STARTERS COMPOSITE HAND DRIVER
Holding SD Code#
• Convenient twist-tip design for onehand use • Fiberglass composite (non-conductive) shaft • Magnetic on opposite end to help retrieve fasteners
00560 00562
Code# Size
Length
Type
⁄16" #2
6" 6"
Slotted Phillips
3
• Accommodates 1/4" Sq. Dr. Sockets
Nut Starter Code#
Capacity
00563
4-40 (2.5mm) to 5⁄16" (8mm)
00812
• 5" Length • Accommodates most standard 1⁄4" hex bits
Length
⁄4" 1 ⁄4"
3" 6"
1
COMPOSITE MAGNETIC BIT TIP SYSTEM Code#
Bits
10460
3
10461
BIT HOLDER EXTENSION BAR FOR CORDLESS DRILL Code#
Drive
00810 00811
• • • •
⁄16" and 1⁄4" Flat, #1 and #2 Phillips 3 ⁄16" and 1⁄4" Flat, #1 and #2 Robertson
Accommodates most standard ⁄4" hex bits Powerful magnet (800 grams) securely holds bits in place Can also be used as a 1⁄4" nut driver Convenient see-through handle stores eight standard bits 1
Only qualified persons may work on electrical circuit parts or equipment that have not been de-energized—29CFR1910.332
6
Open End Wrenches, Box End Wrenches, Tools Rolls
ASTM F1505 Standard
Basic Electrician’s Roll (9 pcs.)
Box End & Open End Wrenches
9" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 7" Needle Nose Pliers Combination Stripper & Crimper #2 x 6 Square (Robertson) Screwdriver* 3 ⁄16" x 6" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* # 1 x 3 Phillips Screwdriver* # 2 x 4 Phillips Screwdriver*
Box End Wrenches Metric
Standard Code#
10340 10342 10344 10346 10348 10350 10352 10354 10356 10358 10360 10362 10364 10366 10368 10370 10373 10374 10376
• Long style
Box End Sets Code# Pcs.
Sizes
10372 01438 10371 10375 10377
1
11 11 8 10 13
Size 1
⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 11⁄16" 11⁄8" 11⁄4" 13⁄8" 11⁄2" 15⁄8"
⁄4" thru 7⁄8" 10mm thru 27mm 3 ⁄8" thru 13⁄16" 1 ⁄4" thru 13⁄16" 1 ⁄4" thru 1"
Code#
Size
01402 01404 01406 01408 01410 01412 01414 01416 01418 01420 01421 01422 01423 01424 01425 01426 01427 01428 01429 01430 01431 01432 01433 01434 01435 01436
6 mm 7mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm 26 mm 27 mm 28 mm 29 mm 30 mm 32 mm
Code#
* 13302
Composite Tools
Meter Reader (Routeman) Roll (10 pcs.) 8" Needle Nose Pliers 3 ⁄16" x 6" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* # 1 x 3 Phillips Screwdriver* # 2 x 8 Phillips Screwdriver* Fuse Puller Plug Wrench 5 ⁄16" Nut Driver* 3 ⁄8" Nut Driver* 1 ⁄2" Nut Driver*
Open End Wrenches Metric
Standard Code#
10300 10302 10304 10306 10308 10310 10312 10314 10316 10318 10320 10322 10324 10326 10328 10330 10337 10338 10339
Open End Sets Code# Pcs.
Sizes
10332 01338 10331 10336 10335
1
7
11 11 8 10 13
⁄4" thru 7⁄8" 10mm thru 27mm 3 ⁄8" thru 13⁄16" 1 ⁄4" thru 13⁄16" 1 ⁄4" thru 1"
Size 1
⁄4" ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 11⁄16" 11⁄8" 11⁄4" 13⁄8" 11⁄2" 15⁄8" 5
Code#
Size
01302 01304 01306 01308 01310 01312 01314 01316 01318 01320 01321 01322 01323 01324 01325 01326 01327 01328 01329 01330 01331 01332 01333 01334 01335 01336
6 mm 7mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm 26 mm 27 mm 28 mm 29 mm 30 mm 32 mm
Code#
* 13393 * 13394
w/ Composite Tools 3" Nut Drivers w/ Composite Tools 6" Nut Drivers
Meter Service Roll (12 pcs.) 9" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 8" Needle Nose Pliers 1 ⁄8" x 3" Slotted Screwdriver* #2 x 6 Square (Robertson) Screwdriver* 3 ⁄16" x 6" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* Fuse Puller Plug Wrench 5 ⁄16" Nut Driver* 3 ⁄8" Nut Driver* 1 ⁄2" Nut Driver* Code#
* 13383 * 13384
Tool boxes instead of rolls available upon request.
w/ Composite Tools 3" Nut Drivers w/ Composite Tools 6" Nut Drivers
ASTM F1505 Standard Nut Screwdriver Roll (11 pcs.)
Tool Rolls Telecommunications Tool Roll (16 pcs.)
1
⁄8" x 3" Slotted Screwdriver* #2 x 6 Square (Robertson) Screwdriver* 3 ⁄16" x 6" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* 3 ⁄16" Nut Driver* 7 ⁄32" Nut Driver* 1 ⁄4" Nut Driver* 9 ⁄32" Nut Driver* 5 ⁄16" Nut Driver* 11 ⁄32" Nut Driver* 3 ⁄8" Nut Driver*
Code#
* 13352 * 13353
Code#
w/ Composite Tools 3" Nut Drivers w/ Composite Tools 6" Nut Drivers
* 13442 Composite Tools
9" Linesman Pliers 6" Needle Nose Pliers 8" Slip Joint Pliers 3 ⁄16" x 5" Elect. Slotted Screwdriver w/Cushion Grip* 1 ⁄4" x 41⁄2" Slotted Screwdriver w/Cushion Grip* 5 ⁄16" x 6" Slotted Screwdriver w/Cushion Grip* 3 ⁄8" x 7" Slotted Screwdriver w/Cushion Grip* # 2 x 4 Phillips Screwdriver w/Cushion Grip* 3 ⁄8" Reversible Ratchet 3 ⁄8" Reversible Torque Wrench 30-150"# 3 ⁄8" Drive 3" Extension 3 ⁄8", 7⁄16", 1⁄2", 9⁄16" Hex Sockets 3⁄8" Drive STD Depth 5 ⁄8" Hex Socket 3⁄8" Drive Deep Depth
Gas Service Roll (11 pcs.) 7" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 8" Needle Nose Pliers 1 ⁄8" x 3" Slotted Screwdriver* 3 ⁄16" x 5" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* Fuse Puller Plug Wrench 5 ⁄16" Nut Driver* 3 ⁄8" Nut Driver* 1 ⁄2" Nut Driver*
Substation Roll (18 pcs.) Code#
13432 Composite Tools—Consists of #13352 or #13353 and #13360 13433 Composite Tools—Consists of #13353 and #13360
Belt Pouches 13202 Meter Service Pouch
Composite Knife 1 ⁄8" x 4" Slotted Composite Screwdriver 1 ⁄4" x 6" Slotted Composite Screwdriver 5 ⁄16" x 6" Slotted Composite Screwdriver #2 x 4" Phillips Composite Screwdriver Wire Stripper 71⁄2" Diagonal Cutter 10" Water Pump Pliers * 8" Adjustable Wrench 9" Linesman Pliers 6" Needle Nose Slotted Composite Holding Screwdriver 3 ⁄8" x 3" Composite Hex Nut Driver 1 ⁄2" x 3" Composite Hex Nut Driver 5 ⁄8" x 3" Composite Hex Nut Driver
Code#
* 13372 * 13373
w/ Composite Tools 3" Nut Drivers w/ Composite Tools 6" Nut Drivers
Tool Roll (7 pcs.) 9" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 6" Needle Nose Pliers Combination Stripper & Crimper Fuse Puller Crimper Plastic Pliers
13204 Electrician’s Service Pouch
* Flashlight and tape not included * 8" Adjustable Wrench not insulated per ASTM F1505 Standard—insulated against grounding only
Code#
13360
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
Composite Knife 1 ⁄8" x 4" Slot. Composite Screwdriver 3 ⁄16" x 5" Slot. Composite Screwdriver 1 ⁄4" x 6" Slot. Composite Screwdriver #2 x 4" Phillips Composite Screwdriver Wire Stripper 71⁄2" Diagonal Cutter 10" Water Pump Pliers Fuse Puller 9" Linesman Pliers 6" Needle Nose 3 ⁄16" x 3" Composite Hex Nut Driver 1 ⁄4" x 3" Composite Hex Nut Driver 5 ⁄16" x 3" Composite Hex Nut Driver 3 ⁄8" x 3" Composite Hex Nut Driver
8
Tool Boxes and Sets
ASTM F1505 Standard
Tool Boxes All Sets Contain: 3
9" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 7" Needle Nose Pliers Voltage Tester 1 ⁄8" x 3" Slotted Screwdriver*
⁄16" x 5" Slotted Screwdriver* ⁄4" x 6" Slotted Screwdriver* # 1 x 5 Phillips Screwdriver* # 2 x 4 Phillips Screwdriver* 1
Additional Contents: Deluxe Electrician’s Tool Box
Deluxe Maintenance Tool Box
Std. Maintenance Tool Box
1
1
⁄2" Reversible Ratchet 5" Extension 1⁄2" Drive 10" Extension 1⁄2" Drive Hex Sockets: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4"
⁄2" Drive 8" “T” Handle Hex Sockets: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4" Open End Wrench: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4"
Code#
Code#
⁄2" Reversible Ratchet 5" Extension 1⁄2" Drive Hex Sockets: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4" Open End Wrench: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4" Code#
* 13411 w/ Composite Tools * 13401 w/ Composite Tools * 13413 w/ Composite Tools * 13403 w/ Composite Tools Tool Box Style
1
Tool Box Style
* 13421 w/ Composite Tools * 13423 w/ Composite Tools Tool Box Style
Deluxe Maintenance Tool Box Shown
Insulated Tool Sets 9" Linesman Pliers 6" Diagonal Cutting Pliers 6" Needle Nose Pliers Crimper 8" Slip Joint 10" Water Pump Pliers 3 ⁄16" x 5" Cushion Grip Elect. Slotted Screwdriver* 1 ⁄4" x 6" Cushion Grip Slotted Screwdriver* 1 ⁄4" x 41⁄2" Cushion Grip Slotted Screwdriver* 5 ⁄16" x 6" Cushion Grip Slotted Screwdriver* # 1 x 5 Cushion Grip Phillips Screwdriver* # 2 x 4 Cushion Grip Phillips Screwdriver* 3 ⁄16", 1⁄4", 5⁄16", 3⁄8" Hex Wrench 1 ⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2" Cushion Grip Hex Nut Driver (3" Shaft)* Code#
* 13407 * 13409
9
Composite Tools Composite Tools w/ 6" Nut Drivers
Custom tool sets can be created from any combination of tools in this catalog.
Tool Boxes and Sets Deluxe Telecommunications Toolbox 1
⁄8" x 3" Slotted Screwdriver ⁄16" x 5" Slotted Screwdriver 1 ⁄4" x 6" Slotted Screwdriver # 1 x 5 Phillips Screwdriver # 2 x 4 Phillips Screwdriver 9" Linesman Pliers 8" Needle Nose Pliers 71⁄2" Diagonal Cutting Pliers 3 ⁄8" Drive Reversible Ratchet 3 ⁄8" Drive 3" Extension 3 ⁄8" Drive 6" Extension 30" – 150" # Torque Wrench 3 ⁄8" Drive Deep Sockets 3⁄8" thru 13⁄16" Box Wrenches 3⁄8" thru 13⁄16" Mini Flashlight 3
Code#
13449 13447
“Briefcase” Style Toolbox Style (shown in #16026 below)
The Hot Box®
The Hot Box® 1
⁄8" x 3" Slotted Screwdriver #2 x 6” Square (Robertson) Screwdriver 3 ⁄16" x 6" Slotted Screwdriver Cushion Grip* 1 ⁄4" x 6" Slotted Screwdriver Cushion Grip* 5 ⁄16" x 6" Slotted Screwdriver Cushion Grip* # 2 x 4" Phillips Screwdriver Cushion Grip* # 2 x 7" Phillips Screwdriver Cushion Grip* 9" Linesman’s Pliers 8" Needle Nose Pliers 71⁄2" Diagonal Cutting Pliers 91⁄2" Cable Cutters 10" Water Pump Pliers
Combination Stripper/Crimper 14 pcs. 1⁄16" – 1⁄2" Allen Hex Wrench Set 3 ⁄8" Drive Reversible Ratchet 3 ⁄8" Drive 3" Extension 3 ⁄8" Drive 6" Extension 10 pcs. 5⁄16" – 7⁄8" 3⁄8" Dr. Hex Socket Set 11 pcs. 1⁄4" – 7⁄8" Box End Wrench Set 3 ⁄16" x 6" Nut Driver Cushion Grip* 1 ⁄4" x 6" Nut Driver Cushion Grip* 5 ⁄16" x 6" Nut Driver Cushion Grip* 11 ⁄32" x 6" Nut Driver Cushion Grip* 3 ⁄8" x 6" Nut Driver Cushion Grip* 7 ⁄16" x 6" Nut Driver Cushion Grip* 1 ⁄2" x 6" Nut Driver Cushion Grip* 30" – 150"# Torque Wrench°
Code#
* 16027 °*16029
Composite Tools Composite Tools w/ Torque Wrench
M16027 w/ Metric Sockets, Nut Drivers, and Box Wrenches M16029 w/ Torque Wrench, Metric Sockets, Nut Drivers, and Box Wrenches 16051 16052
w/ 1⁄2" Drive Ratchet, Sockets, and Extensions w/ 1⁄2" Drive Torque Wrench, 1⁄2" Drive Ratchet, Sockets, and Extensions
M16051 w/ 1⁄2" Drive Metric Sockets, Nut Drivers, and Box Wrenches M16052 w/ 1⁄2" Drive Torque Wrench, Metric Sockets, Nut Drivers, and Box Wrenches
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
10
Insulating Blankets and Accessories, Glove Accessories 7.5 KV PVC Insulating Roll
Sleeves
• With bag, straps & fasteners
Code#
Class
Max. Volts
Size
21080 21082 21084 21090 21092 21094
0 0 0 2 2 2
1,000 1,000 1,000 20,000 20,000 20,000
Reg Large X-Large Reg Large X-Large
Code#
Description
21096 21097
Sleeve Fasteners, 6 / bag Sleeve Straps Regular, w/ buttons Sleeve Straps Extra Large, w/ buttons Replacement Sleeve Bag
21098 22300
• Meets ASTM F1742-96 Standard • Transparent, tested @ 10 KV • Cut amount needed, discard when finished
Code#
Description
Size
20307 20309
7.5 KV Insulating Roll 7.5 KV Insulating Roll
20312
Wood Container for Roll
20302 20317
4' x 50' Kit (Roll and Container) 4' x 25' Kit (Roll and Container)
Glove Inflator Code#
4' x 50' 4' x 25'
51200
Proper safety calls for frequent on-the-job inspection of equipment for mechanical damage. Inflators offer a quick, easy way to do a complete and thorough visual inspection of rubber gloves.
Electrical Insulating Protective Shielding • Type 2 Insulating—Flame, Oil, and Ozone Resistant Electrical insulating rubber shielding is engineered to protect personnel, equipment, and work areas from electrical hazards up to 26,500 volts. The shielding is flame, oil, ozone, and puncture resistant, remains flexible to -60° F, and will not melt. CIP’s insulating shielding is available in convenient “safety yellow” rolls, and is 100% tested to meet ASTM standards.
Glove Cleaner Code#
20336
Code#
Size
Max Use Voltage
20332 20333 20335
36" x 25' 36" x 25' 36" x 36"
1,000 7,500 26,500
Liquid cleaner is ideal for cleaning rubber protective equipment. this concentrated, water-based detergent soap is formulated with special grease cutters. It is highly effective in removing oil, grease, and dirt from all types of rubber equipment such as linemen’s gloves, sleeves, blankets, etc. • 1 gallon liquid cleaner
Type I Insulating Blankets and Accessories
Talc
• Meets ASTM D1048-98 Standard Code#
Description
20304
36" x 36" Class “O” Type I (1000V Max.) Blanket 36" x 36" Class “2” Type I (20,000V Max.) Blanket Blanket Canister 36" x 36" Class “2” Blanket Kit (Blanket, Clamps, & Canister) 36" x 36" Class “O” Blanket Kit (Blanket, Clamps, & Canister) Blanket Clamps (set of 2) Magnetic Blanket Button
20305 20310 20300
20301
20320 20299
Description
51202 51204
1 Gal. Container Case 12–8 fl. oz. bottles
For maximum on-the-job comfort, this cooling powder absorbs moisture and perspiration while minimizing friction inside rubber insulating gloves and sleeves. It also acts as a lubricant to keep equipment from sticking. Talc does not harm the skin or reduce dielectric values of the equipment.
Glove Liners, Pair • Knit Cotton
11
Code#
ASTM F1742, ASTM D1051, ASTM D1048 Standards
Code#
Size
51210 51212
10" 14"
Hook Stick, Arc Blankets, Grounding Sets Safety Rescue Hook Code#
32514
Width
12
Length
9’
Arc Suppression Blankets
Code#
Size
20340 20342 20342
4' x 5' 4' x 8' 5' x 8'
Kits
Arc Suppression Blankets are built with the latest fabric technologies to provide a passive barrier from peripheral arc blasts. ideal for confined spaces such as underground vaults, the blanket will reduce the effects of an arc blast occurring beyond the primary work area. An ideal compliment to personal protective apparel, the Arc Suppression Blanket, when properly used, will reduce the extent of the worker’s exposure during an open arc event.
Code#
Description
20343 20344
4' x 5' Arc Blanket Kit 5' x 8' Arc Blanket Kit
Constructed with a multilayer design, including Dupont® Kevlar®, the blanket is designed to deflect the energy of the arc blast. The blanket is fitted with strong Kevlar® straps with carabiners developed specifically for this application.
Grounding Sets Code# • 21 kA 15 cycles 26800 • ASTM Grade 5 • Set includes: – four-way connector w/ sleeves – four 11⁄2" smooth jaw clamps w/ sleeves – double hanger stud – contact stud – 34' 1/0 Cu cable – four pair ferrules
Grounding Clusters are used to make it easy for a single line worker to apply multiple grounding jumpers. All clusters have the option of a ground lead by using the extra connection point included on each cluster.
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
12
Insulating Gloves Insulating Gloves
Employees working in areas where there are potential electrical hazards shall be provided with, and shall use, electrical protective equipment that is appropriate for the specific parts of the body to be protected and for the work to be performed.
Even though you are using insulated tools, you must still wear the required gloves. The gloves protect the hands and wrist. Size
Length
Class
Description
Glove
+ Protector + Glove Bag =
Kit
7 8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
11" 11" 11" 11" 11" 11" 11" 11" 11" 11"
00 00 00 00 00 00 00 00 00 00
Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max)
51296 51298 51299 51300 51301 51302 51303 51304 51305 51306
51290 51291 51291 51292 51293 51293 51294 51294 51295 51295
22100 22100 22100 22100 22100 22100 22100 22100 22100 22100
52296 52298 52299 52300 52301 52302 52303 52304 52305 52306
7 8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
11" 11" 11" 11" 11" 11" 11" 11" 11" 11"
0 0 0 0 0 0 0 0 0 0
Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max)
51110 51111 51112 51113 51114 51115 51116 51117 51118 51119
50301 50302 50303 50303 50305 50305 50307 50307 50309 50309
22100 22100 22100 22100 22100 22100 22100 22100 22100 22100
51100 51101 51102 51103 51104 51105 51106 51107 51108 51109
8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
14" 14" 14" 14" 14" 14" 14" 14" 14"
2 2 2 2 2 2 2 2 2
High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max)
20160 20161 20163 20164 20165 20166 20167 20168 20169
20001 20003 20003 20005 20005 20007 20007 20009 20009
22200 22200 22200 22200 22200 22200 22200 22200 22200
20171 20172 20173 20174 20175 20176 20177 20178 20179
Class 00 High Dexterity Gloves
Class 0 and Class 00 Glove Kit
Class 2 Glove Kit
Employees shall use insulated tools and/or handling equipment when working inside the limited approach boundary of live parts where tools or handling equipment might make accidental contact. Approach Boundaries to Live Parts for Shock Protection Nominal System Voltage Range Phase to Phase
Exposed Movable Conductor
Exposed Fixed Circuit Part
Restricted Approach Boundary Incl. Inadvertent Movement
Prohibited Approach Boundary
0 to 50 51 to 300 301 to 750
Not Specified 10 ft 0 in 10 ft 0 in
Not Specified 3 ft 6 in 3 ft 6 in
Not Specified Avoid Contact 1 ft 0 in
Not Specified Avoid Contact 0 ft 1 in
751 to 15 kV 15.1 kV to 36 kV 36.1 kV to 46 kV
10 ft 0 in 10 ft 0 in 10 ft 0 in
5 ft 0 in 6 ft 0 in 8 ft 0 in
2 ft 2 in 2 ft 7 in 2 ft 9 in
0 ft 7 in 0 ft 10 in 1 ft 5 in
46.1 kV to 72.5 kV 72.6 kV to 121 kV 138 kV to 145 kV
10 ft 0 in 10 ft 8 in 10 ft 0 in
8 ft 0 in 8 ft 0 in 10 ft 0 in
3 ft 3 in 3 ft 2 in 3 ft 7 in
2 ft 1 in 2 ft 8 in 3 ft 1 in
161 kV to 169 kV 230 kV to242 kV 243 kV to 362 kV
11 ft 8 in 13 ft 0 in 15 ft 4 in
11 ft 8 in 13 ft 0 in 15 ft 4 in
4 ft 0 in 5 ft 3 in 8 ft 6 in
3 ft 6 in 4 ft 9 in 8 ft 0 in
500 kV to 550 kV 765 kV to 800 kV
19 ft 0 in 23 ft 9 in
10 ft 0 in 23 ft 9 in
11 ft 3 in 14 ft 11 in
10 ft 9 in 14 ft 5 in
13
Only qualified persons may work on electric circuit parts or equipment that have not been de-energized using proper procedures. Such persons shall be capable of working safely on energized circuits and shall be familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding equipment, and insulated tools.
ASTM F1505 Standard
Insulating Gloves, Dielectric Boots Insulating Gloves Size
Length
Class
Description
Glove
+ Protector + Glove Bag =
Kit
7 8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
14" 14" 14" 14" 14" 14" 14" 14" 14" 14"
00 00 00 00 00 00 00 00 00 00
Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max)
51307 51308 51309 51310 51311 51312 51313 51314 51315 51316
51318 51319 51320 51320 51321 51321 51322 51322 51323 51323
22200 22200 22200 22200 22200 22200 22200 22200 22200 22200
51325 51326 51327 51328 51329 51330 51331 51332 51333 51334
7 8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
14" 14" 14" 14" 14" 14" 14" 14" 14" 14"
0 0 0 0 0 0 0 0 0 0
Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max)
51120 51121 51122 51123 51124 51125 51126 51127 51128 51129
51130 51131 51132 51132 51133 51133 51134 51134 51135 51135
22200 22200 22200 22200 22200 22200 22200 22200 22200 22200
51137 51138 51139 51140 51141 51142 51143 51144 51145 51146
8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
14" 14" 14" 14" 14" 14" 14" 14" 14"
1 1 1 1 1 1 1 1 1
High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max)
20140 20141 20142 20143 20144 20145 20146 20147 20148
20001 20001 20003 20003 20005 20005 20007 20007 20009
22200 22200 22200 22200 22200 22200 22200 22200 22200
20150 20151 20152 20153 20154 20155 20156 20157 20158
Please order the proper size.
In order to determine the proper size for Class 0 and 00 insulating gloves, use a tape measure to find the circumference of your hand around the palm. For example, 8" means your Class 0 and 00 glove size is 8. For Class 2 gloves add 1 ⁄2 size to allow for dexterity. For example 8" means your Class 2 glove size is 81⁄2.
In mid-1995, we started putting serial numbers on all our gloves and sleeves which indicate the month and year they were manufactured. It works like this. The following number — which was on a pair of sleeves — indicates they were manufactured in March 2001: C at the beginning tells us manufacturing took place in the third month. A is Jan., B is Feb., C is March, etc.
C400661JA
Two letters on the end indicate the last two digits of the year of manufacture. A is 1, B is 2, C is 3, etc.
Number in the middle is from the dip ticket for the product.
Dielectric Boots Size
Deep Heal Overshoe
17" Full Cut Overshoe
14" Super Dielectric Boot
5 6 7 8 9 10 11 12 13 14 15 16 17
21580 21582 21584 21586 21588 21590 21592 21594 21595 21596 21597 21598 21599
21407 21408 21409 21410 21411 21412 21413 21414 21415 21416 21417
21507 21508 21509 21510 21511 21512 21513 21514 21515 21516 21517
Dielectric Deep Heel Overshoes provide extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are made from an ozone resistant yellow rubber that’s 100% waterproof. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole is an anti-skid bar tread. All of these overshoes meet ANSI Z41 requirements and have been tested to 20,000 volts.
The 14" Super Dielectric Boot offers a high level of protection from electrical shock to utility workers, electric contractors, and others working dangerously close to electrical hazards. These boots meet ASTM F1117 requirements, and have been tested to 15,000 volts AC and 45,000 volts DC. The boots are completely waterproof and resistant to ozone. The tough fabric lining makes the fit comfortable and easy to take on and off.
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
14
Hot Sticks, Grounding Equipment Hot Sticks
Socket Clamps Code#
Description
Length
40090 42150 49935
External Rod Clampstick Universal Switching Stick Fiberglass Hot Switch Stick
6'- 8" 11⁄4" x 8’ 11⁄4" x 8”
Code#
ASTM Grade
Continuous Current Rating
Strain Relief?
21190 21277
5 5
400 400
Yes No
The Ball and Socket Grounding System allows for variable angle accessibility. This system is compact nd lightweight. there are fixed grounding points on the socket clamp. The socket clamp is made from a bronze. The socket size is 1", with a threaded bore boss of 5⁄8"-11 UNC. An integral cable support with strain relief is included.
Ball Studs
40090
Description
Ball Stud Short Ball Stud Long Offset NEMA Pad Cover for Ball Stud
The Ball Stud, short and long, and the Offset Nema Pad Ball Stud are made from a copper alloy, tin-plated. They each have a 1" diameter ball. The long and short ball Stud have a 1⁄2"-13 UNC x 2" thread and a recommended installation torque of 300" lbs. The short stud is used conventionally. the long stud can also be used as the grounding point for “C” or duckbill clamps that have a jaw width of 23⁄4" or less. The Offset Nema Pad ball Stud has the standard Nema bolt hole spacing.
42150 49935
Tubular PVC Storage Container • sized for tools 12" shorter than tube • weather tight • kit includes two mounting brackets, four steel bolts
Code#
21191 21192 21228 21236
Code#
Length
Inner Dia.
41690
9'
6"
The Ball Stud Cover allows for multiple angle application when installed using a clampstick.
Voltage Detector Kit Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks with a splined universal end fitting. Each tester has a 4.5 volt transistor amplifier with an audio/visual indicator. It is recommended that the tester be moved closer to the conductor until warning is indicated, or the unit touches a conductor, apparatus, or test point. Test the unit on a nearby conductor to get verification of “dead”. Each kit includes a 240V – 230kV Tester, Case, Shotgun Adapter, and three “C” batteries. Code#
43560
15
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
ELECTRICAL ARC FLASH PROTECTION Sample Flash Apparel ATP Values (cal/cm2)
Arc Protection Clothing Requirements • An employee must wear flame-resistant (FR) clothing to work around energized parts. • To evaluate FR clothing materials in order to measure the heat transferred through the fabric, two values are calculated: arc-thermal performance value (ATPV) and heat attenuation factor (HAF). • ATPV is the minimum energy causing the predicted onset of second-degree burns. • HAF is the percentage of total energy of the arc that the fabric prevents from passing through. • Heavier or layers of FR fabrics give higher ATP values. • Clothing shall cover potentially exposed areas as completely as possible.
For arc hazard assessment software, see our website at www.insulatedtools.com/arc_software.html
• Layering of non-FR clothing under an outer shell of FR fabric can give a false sense of security. If the outer layer should break open, the inner clothing could ignite. • Always do a hazard assessment
Acceptable FR Fabrics • INDURA® 100% Cotton is flame resistant for the useful life of the garment. A treatment is used that fixes the flame retardant inside the cotton fibers and allows the clothing to breathe. • Meta aramid (NOMEX®) is blended with 5% para aramid fibers (kevlar) to yield NOMEX® fabrics. • PBI kevlar (60%) and PBI (40%) are blended to produce the fabric known as PBI.
Fabrics Single Layer FR Cotton 7.5 oz. weave . . . . . 6.0 Single Layer FR Cotton 9.8 oz. weave. . . . . . 11 Single Layer Aramid 4.5 oz. weave . . . . . . . . . . . . . . 4.6 Single Layer Aramid 6.0 oz. weave . . . . . . . . . . . . . . 5.6 Single Layer Aramid 7.5 oz. weave . . . . . . . . . . . . . . 7.0 6.0 oz. Aramid over 10 FR Cotton . . . . . . . . . . . . . . 31.0 7.0 oz. Polybenzimidazole Para Aramid Aluminized weave . . . . . . . . . 20.4 6.0 oz. Aluminized Polybenzimidazole Blend Knit over 6.0 oz. FR Cotton Flannel . . . . . . . . . . 55.4 Single Layer INDURA ULTRA SOFT® Material 13 oz. weave . . . . . . . . . . . . . . . 20
Prohibited fabrics and fibers when used alone: acetate, nylon, polyester, and rayon. Flash Protection Arc Shields & Accessories
9 oz. INDURA ULTRA SOFT® over 7 oz. INDURA ULTRA SOFT® . . . . . . . . . . . . . . . . . . . 31
• Permanent anti-fog coating • Light green tint • For use with flame-resistant clothing
9 oz. INDURA ULTRA SOFT® over 12 oz. INDURA ULTRA SOFT® . . . . . . . . . . . . . . . . . . . 40 12 oz. INDURA ULTRA SOFT® over 12 oz. INDURA ULTRA SOFT® . . . . . . . . . . . . . . . . . . . 50 6.8 oz. TUFFWELD® 700 Fabric with Inner Layer of Q9 and NOMEX® CALDURA® Lining . . . . . . . . . . . . . . . . . . . . 50
Code#
52510
52509
52512
52505
52513
Arc Shields Code#
Description
52510 52511 52508 52506 52507 52500 52501
Arc Shield with Hard Hat Arc Shield only Arc Shield/Hard Hat/ Storage Bag Arc Shield/Hard Hat/ Storage Bag/Back Pack Arc Shield/Hard Hat/Back Pack Arc Shield/Hard Hat/ Storage Bag/Tool Back Bag Arc Shield/Hard Hat/Tool Back Pack
cal/cm2
Description
52502 52503 52504 52505 52509 52512 52513 52545 52546 52540 52542
Replacement Lens Hard Hat Adapter 11 cal Flash Protection Glove 50 cal Flash Protection Glove Arc Shield Storage Bag Flash Protection Hot Pack® Flash/ToolHot Pack® NOMEX® Detachable Hood INDURA® Detachable Hood Safety Helmet Class E Safety Glasses
cal/cm2
INDURA ULTRA SOFT® over 2 Layers of 7 oz. INDURA ULTRA SOFT® over 12 oz. INDURA ULTRA SOFT® . . . . . . . . . . . . . . . . . . . 100 TUFFWELD® 1000 Fabric with Inner Layers of Q9 Fabric and NOXEX® CALDURA® Lining . . . . . . . . . 50
10 10 10 10 10 10 10
Shields Clear U/V Face Shield . . . . . . . 1.2 NOT RECOMMENDED Gold Reflective U/V Face Shield . . . . . . . . . . . 7.33
Accessories Code#
52546
The Hot Pack®
10
Arc Shield . . . . . . . . . . . . . . . . 10.0
5.6 11
Safety Tools to 1,000 Volts A.C. • Insulating Products to 40,000 Volts A.C.
16
Arc Protection Clothing and Kits
ARC PROTECTION CLOTHING (FR) AND KITS Electrical Arc Hood • The Flash Arc Hood incorporates UV- and IR-absorbing window providing protection up to 100 cal/cm2. Past generations of gold reflective faceshields only provided up to 7.33 cal/cm2 of protection, and the typical clear faceshield only 1.2 cal/cm2. • The green tint window is coated with a permanent anti-fog inner surface. Code #52509 Storage Bag Available for Hood • Arc Hoods are supplied with Hard Hat Adapter and Safety Helmet.
Flash Protection Clothing (FR)
Navy Blue Parka
®
Ultra Soft INDURA fabric weight 9.8 oz., ATPV 11 cal/cm 2 NOMEX® fabric weight 6.0 oz., ATPV 5.6 cal/cm 2
Small Medium Large X-Large XX-Large XXX-Large XXXX-Large
Flash Jackets and Pants
NOMEX® is a DuPont registered trademark for aramid fiber. TuffWeld® is a registered trademark of Southern Mills, Inc.
52515 52517 52685 52686 52687 52688 52689 52699
Flash Protection Arc Hood Replacement Window Flash Arc Hood Replacement Window Flash Arc Hood Replacement Window Flash Arc Hood Replacement Window
20 20 31 31 50 50 100 100
Navy Blue Lab Coat
Navy Blue Coveralls
Navy Blue Overalls
INDURA®
NOMEX®
INDURA®
NOMEX®
INDURA®
NOMEX®
52550 52552 52554 52556 52557 52558 52559
52620 52622 52624 52626 52628 52630 52632
52650 52651 52652 52653 52654 52655 52656
52635 52636 52637 52638 52639 52640 52641
52580 52582 52584 52586 52587 52588 52589
52590 52592 52594 52595 52596 52597 52598
52560 52562 52564 52566 52568 52570 52572
52660 52662 52664 52666 52668 52670 52672
31 cal/cm 2
Single-layer 13oz. Navy Blue Ultra Soft INDURA®. Thread— NOMEX®/Kevlar.
Medium Large X-Large XX-Large XXX-Large XXXX-Large XXXXX-Large
cal/cm1
NOMEX®
Coat
INDURA® is a registered trademark of Westex, Inc.
Description
INDURA®
20 cal/cm 2
Flash Jacket is approximately waist length and must be worn in combination with Flash Pants.
Code#
52520 52521 52522 52523 52524 52525 52526
Multi-layer 9oz. INDURA® Ultra Soft with over 7oz. INDURA® Ultra Soft. Thread—NOMEX®/Kevlar.
50 cal/cm 2
100 cal/cm 2
Multi-layer 6.8oz. Southern Mills
Multi-layer 10oz. Southern Mills
TuffWeld® 700 Fabric with inner layer of Q9 Fabric and NOMEX® Caldura® lining. Thread— NOMEX®/Kevlar.
TuffWeld® 1000 Fabric with inner layers of Q9 Fabric and NOMEX® Caldura® lining. Thread— NOMEX®/Kevlar.
Coverall
Jackets
Pants
Jackets
Pants
Jackets
Pants
52771 52772 52773 52774 52775 52776 52777
52679 52680 52681 52682 52683 52684 52697
53679 53680 53681 53682 53683 53684 53685
52690 52691 52692 52693 52694 52695 52696
53690 53691 53692 53693 53694 53695 53696
52749 52750 52751 52752 52753 52754 52755
53749 53750 53751 53752 53753 53754 53755
Clothing Sizes* (All Styles) Typical Protective Clothing Systems Jacket Sizes
Medium Large X Large 2X Large 3X Large 4X Large 5X Large
Normal Size
38" - 40" 42" - 44" 46" - 48" 50" - 52" 54" - 56" 58" - 60" 62" - 64"
Bib-Overall Pants Finish Size
Waist Size
48" 52" 56" 60" 64" 68" 72"
32" - 34" 36" - 38" 40" - 42" 44" - 46" 48" - 50" 52" - 54" 56" - 58"
*Notes: Because the clothing is worn outside of the user’s street clothes, take into consideration the size and weight of the clothes the user will be wearing (Example: warm winter jackets, etc). Jacket is approximately waist length.
18 17
Hazard Risk Category
0 1 2 3 4
Clothing Description (Number of layers given in parentheses)
Total weight (oz / yd2)
Untreated Cotton (1) FR Shirt and FR Pants (1) Cotton underwear plus FR shirt and FR pants (2) Cotton underwear plus FR shirt and FR pants plus FR coverall (3) Cotton underwear plus FR shirt and FR pants plus double layer switching coat and pants (4)
4.5 4.5 9 16
— — — —
7 8 12 20
ATPV or Egr Rating or PPE cal/cm 2
N/A 5 8 25
24 — 30
40
*ATPV is defined in the ASTM P S 58 standard arc test method for flame resistant (FR) fabrics as the incident energy that would just cause the onset of a second degree burn (1.2 cal/cm2). Egr is reported according to ASTM P S58 and is defined as the highest incident energy which did not cause FR fabric breakopen and did not exceed the second-degree burn criteria. Egr is reported when ATPV cannot be measured due to FR fabric breakopen.
If the incident energy level is known, the workerASTM knows F1506, the type F1959, or protective and ANSI Z87.1-989 equipment Standards and tools to wear/use while servicing the equipment.
Arc Protection Clothing and Kits
ARC PROTECTION CLOTHING (FR) AND KITS Arc Protection Kits
Code #52811 20 cal/cm 2 Arc Protection Kit Hazard Risk Category 2*
Code #52800 10 cal/cm 2 Arc Protection Kit Hazard Risk Category 2
Code #52706 50 cal/cm 2 Arc Protection Kit Hazard Risk Category 4
Code #52546 Detachable Hood
Specify parka / coat / jacket and glove sizes when ordering kits. (See Pages 16–17 for gloves.) 52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 1,000V Class 0 Class 0 22100 52540 52599
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 20,000V Class 2 Class 2 22200 52540 52599
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 1,000V Class 0 Class 0 22100 52540 52599
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 20,000V Class 2 Class 2 22200 52540 52599
52800 52804
52801 52804
52802 52805
52803 52805
Anti-Fog Arc Shield Safety Glasses Flame Retardant Lab Coat Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag Flame Retardent Hood Complete Kit Code # Kit Without Gloves Code #
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 1,000V Class 0 Class 0 22100 52540 52599 52546 52806 52808
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 20,000V Class 2 Class 2 22200 52540 52599 52546 52807 52808
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 1,000V Class 0 Class 0 22100 52540 52599 52545 52820 52824
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 20,000V Class 2 Class 2 22200 52540 52599 52545 52822 52824
Anti-Fog Arc Shield Safety Glasses Flame Retardant Coverall Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag Flame Retardent Hood Complete Kit Code # Kit Without Gloves Code #
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 1,000V Class 0 Class 0 22100 52540 52599 52546 52830 52834
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 20,000V Class 2 Class 2 22200 52540 52599 52546 52832 52834
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 1,000V Class 0 Class 0 22100 52540 52599 52545 52836 52840
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 20,000V Class 2 Class 2 22200 52540 52599 52545 52838 52840
Electrical Arc Hood Safety Glasses Flash Jacket & Pants Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag
52515 (20 cal/cm 2) 52542 20 cal/cm 2 Coat Only 1,000V Class 0 Class 0 22100 52540 52599
52515 (20 cal/cm 2) 52542 20 cal/cm 2 Coat Only 20,000V Class 2 Class 2 22200 52540 52599
52685 (31 cal/cm 2) 52542 31 cal/cm 2 Jacket & Pants 1000V Class 0 Class 0 22100 52540 52599
52685 (31 cal/cm 2) 52542 31 cal/cm 2 Jacket & Pants 20,000V Class 2 Class 2 22200 52540 52599
52810 52814
52811 52814
52701 52702
52703 52702
52687 (50 cal/cm 2) 52542 50 cal/cm 2 1000V Class 0 Class 0 22100 52540 52599
52687 (50 cal/cm 2) 52542 50 cal/cm 2 20,000V Class 2 Class 2 22200 52540 52599
52689 (100 cal/cm 2) 52542 100 cal/cm 2 1000V Class 0 Class 0 22100 52540 52599
52689 (100 cal/cm 2) 52542 100 cal/cm 2 20,000V Class 2 Class 2 22200 52540 52599
52705 52707
52706 52707
52709 52711
52710 52711
Anti-Fog Arc Shield Safety Glasses Flame Retardant Parka Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag Complete Kit Code # Kit Without Gloves Code #
Complete Kit Code # Kit Without Gloves Code # Electrical Arc Hood Safety Glasses Flash Jacket & Pants Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag Complete Kit Code # Kit Without Gloves Code #
If the incident energy level is known, the worker knows the type or protective equipment and tools to wear/use while servicing the equipment.
19 18
Safety Tools & Products Safety Tools to 1000 VAC Insulation Products to 40,000 VAC
Electro Safe
®
12102 Conway Road • Beltsville, MD 20705 Tel: (800) 443-1196 • (301) 210-0215 • Fax: (301) 210-0217 E-mail [email protected] • www.insulatedtools.com
Certified Insulated Products
Certified Insulated Products
Electro Safe
®
12102 Conway Road • Beltsville, MD 20705 Tel: (800) 443-1196 • (301) 210-0215 • Fax: (301) 210-0217 E-mail [email protected] • www.insulatedtools.com
Certified Insulated Products
Certified Insulated Products
Pliers, Cutters Linesman Pliers
ASTM F1505 Standard Code#
10000 10003 10005 10006 10007
Cable Cutters
Length
Code# Length
75⁄16" Standard 81⁄2" Standard 91⁄4" Premium 91⁄4" Standard 91⁄4" Standard w/ Crimper
10040 10041* 10042
Capacity
9 ⁄2" 4/0 Alum, 2/0 Copper 10" 4/0 Alum, 2/0 Copper 8" 2/0 Alum, 2/0 Copper 1
* Easily slices up to 100-pair telephone cable
• New England style, high leverage
Needle Nose Pliers Code#
Length
10008 10010 10013 10014 10016
4" 6" 71⁄2" 7" 8"
• High leverage Bent Nose
Ratcheting Cable Cutter
• Side cutting feature
Code#
10048
Flat Nose Pliers Code#
Length
10020
6"
Code#
Length
Capacity
10066 10068 10070 10071 10073 10075
4" 6" 10" 10" 12" 12"
⁄2" ⁄8" 11⁄2" 11⁄2" 2" 2"
• Duck bill
Water Pump Pliers 1 7
Box Joint Box Joint
• • • • • •
Cuts copper communications cable up to 3" (76 mm) in diameter Compact, lightweight, weighs only 3 lbs. (1.13 kg.) Easy to use, one-handed operation Release lever disengages ratchet, allowing blades to open even in mid-cut Safety latch locks blades in closed position for storage Features a rubber boot to lodge stationary handle against work surface to multiply manual effort
Note: This tool should never be used to cut steel or steel reinforced cable.
• Positive locking design
Diagonal Cutting Pliers
Slip Joint Pliers Code#
Length
10050 10052
8" 10"
Code#
Length
10028 10030 10033 10034
4" 6" 7" 8"
Code#
Length
10039
7"
• Standard bevel cutting knives • Milled teeth & jaws
Plastic Pliers Crimping Pliers Code#
Length
Capacity
10060
10"
#10–22 AWG
Other
• Fiberglass
• Wire cutter built into base • For insulated and non-insulated terminals
Adjustable Wrenches Code#
10090 10092 10094 10096 10098
Length Jaw Opening
6" 8" 10" 12" 15"
• WARNING: Not 1000V Rated. Does not meet ASTM standards for insulated tools.
1
⁄4" ⁄16" 11⁄8" 5 1 ⁄16" 111⁄16" 3
15
The insulation consists of a textured orange layer over the inner yellow layer. If the inner layer of insulation becomes visible through the orange, the tool must be immediately removed from service.
Strippers, Crimpers, Wrenches
ASTM F1505 Standard Stripper & Crimping Pliers
Hexagon Wrench Code#
Capacity
Length
10080 #10–22 AWG 10081 #8–30 AWG 10082 #10–28 AWG 10084 #10–18 AWG Solid 10085 #10–22 AWG 10087 #10-18 AWG
10080
81⁄4" 7" 61⁄2 V-notch 61⁄2" 61⁄2" In-line STRANDED
Code#
• Long arm Sets Code# Pcs.
Sizes
10141 10142 10144
5
7 10 14
⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", 1⁄4" ⁄16" thru 3⁄8", w/o 7⁄64" & 9⁄64" 1 ⁄16" thru 1⁄2" 1
10081 Metric Sets
10084
Code# Pcs.
Sizes
01042 01044 01064 01065 01046 01048
1.5 mm thru 10 mm w/o 7 & 9 mm 1.5 mm thru 10 mm w/o 9 mm 1.5 mm thru 10 mm w/o 7 mm 1.5 mm thru 10 mm 1.5mm thru 13mm 1.5mm thru 24mm
9 10 10 11 13 18
10123 10124 10125 10126 10127 10128 10129 10130 10131 10132 10134 10136 10138 10140 10145 10146 10147 10148 10149
Size
Code#
Size
⁄16" 5 ⁄64" 3 ⁄32" 7 ⁄64" 1 ⁄8" 9 ⁄64" 5 ⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 3 ⁄4" 7 ⁄8" 1"
01050 01051 01052 01053 01054 01055 01056 01057 01058 01059 01060 01061 01062 01063 01066 01067 01068 01069
1.5 mm 2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 12mm 13mm 14mm 17mm 19mm 22mm 24mm
1
“T” Handle Hexagon Wrench
10085
Code#
10105 10106 10107 10108 10109 10110 10111 10112 10114 10116 10117 10118 10119
“T” Handle Hexagon Socket Wrench
• Overall length 10" • Handle length 8"
Code#
Size
10150 10152 10154 10156 10158 10160 10162 10164 10165 10166 10167
⁄8" ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 3
7
01002 01003 01004 01005 01006 01007 01008 01009 01010 01011 01012 01014 01016 01018 01020 01022 01024 01026 01028 01030 01032
Code#
Size
⁄32" 7 ⁄64" 1 ⁄8" 9 ⁄64" 5 ⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16"
01070 01071 01072 01073 01074 01075 01076 01077 01078 01079
2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm
3
• Heat treated for strength • 6" length
Pipe Wrench Code#
Size
Sets Size
⁄16" ⁄32" 3 ⁄8" 13 ⁄32" 7 ⁄16" 15 ⁄32" 1 ⁄2" 17 ⁄32" 9 ⁄16" 19 ⁄32" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 11⁄16" 11⁄8" 11⁄4" 11⁄2" 5
11
Code#
00970 00971 00972 00973 00974 00975 00976 00977 00978 00979 00980 00981 00982 00983 00984 00985 00986 00987 00988 00989 00990
Size
5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm
Code#
00991 00992 00993 00994 00995 00996 00997 00998 00999 01000 01001
Size
26 mm 27 mm 28 mm 29 mm 30 mm 31 mm 32 mm 33 mm 34 mm 35 mm 36 mm
Code# Pcs.
Sizes
01090 01092 10120 10122 10101 10102 10103 10104
2 thru 10 mm w/o 7 & 9mm 2 thru 10mm 1 ⁄8" thru 3⁄8" 3 ⁄32" thru 3⁄8" 1 ⁄8" thru 1⁄2" 1 ⁄8" thru 9⁄16" 3 ⁄32" thru 1⁄2" 3 ⁄32" thru 9⁄16"
8 10 8 10 10 11 12 13
2" Plug Wrench Code#
Length
10430
2"
• Remove and install screw plugs with raised “D” in fuse socket
⁄2" Dr. Current Transformer Bar
1
Code#
10169
Moisture and surface contaminents are conductive, so it is imperative that insulated tools be kept clean, dry, and free of surface contaminents.
2
Wrenches
ASTM F1505 Standard
Geared Style Box Wrenches
Fuse Puller Code#
10440
Code#
Size
Code#
Size
0442 10443 0444 0445 10446 10447 10448 10449 10450 10451 10452 10453
⁄16" ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1"
10478 10479 10481 10483 10484 10486 10487 10489 10491 10492 10494
8mm 9mm 11mm 13mm 14mm 16mm 17mm 19mm 21mm 22mm 24mm
5
3
Insulated Knife & Sheath
Code#
Pcs
Blade
Sickle Straight
14300
• Fiberglass
Torque Wrenches / Screwdrivers Wrenches
Sets
10454 10455 10456 10498
Code#
14299 14300
Sizes
5 9 ⁄16" thru 13⁄16" 5 ⁄16" thru 7⁄8" 10 5 12 ⁄16" thru 1" 11 8mm thru 24mm
Code#
Range
Length
10173 10184 10185 10185S 11184 10186 10187
30 – 150"# 30 – 150"# 150 – 750"# 15’# – 75’# 50 – 250"# 150 – 750"# 30'# – 150'#
10" 10" 15" 15" 13" 15" 19"
Code#
Length
10410 10411 10412
7" 83⁄8" 91⁄2"
Size
⁄8" x 7⁄16" 9 ⁄16" x 3⁄4" 3 ⁄4" x 7⁄8" 3
Code#
Range
Length
10174 10175 10176
1 – 30"oz 2 – 36"oz 2 – 100"oz
63⁄8" 63⁄8" 63⁄8"
10177
• Ratcheting • Provides separation between the ratchet ends to eliminate accidental contacts on low voltage installations
Code#
Code# Pcs.
Sizes
10431 10433
1
9 10
3
Code#
Size
10421 10422 10423 10424 10425 10426 10427 10428 10429 10432
⁄4" ⁄16" ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 7 ⁄8"
⁄4" Hex to 1⁄4" Sq. Dr. Adapter
1
Reversible Ratchet
Ratcheting Wrenches
Sets
⁄4" ⁄8" 3 ⁄8" 3 ⁄8" 3 ⁄8" 1 ⁄2" 1 ⁄2" 1
Screwdrivers
Connector Wrenches
• Metric and larger sizes available upon request
Drive
10178 10180 10182 10470
1
Drive
Length
⁄4" 3 ⁄8" 1 ⁄2" 3 ⁄4"
6" 7" 10" 24"
1
5
3
• Raised lever allows reversing while wearing gloves • Extensions bars are required
Extension Bars Code#
10168 10189 10191 10188 10190 10192 10193 10194 10196
⁄4" thru 3⁄4" 1 ⁄4" thru 5⁄8"
Drive
Length
⁄2" 1 ⁄4" 1 ⁄4" 3 ⁄8" 3 ⁄8" 3 ⁄8" 1 ⁄2" 1 ⁄2" 1 ⁄2"
20" 2" 6" 3" 6" 12" 2 1⁄2" 5" 10"
Drive
Length
⁄8" 1 ⁄2"
9" 12"
1
Breaker Bar Code#
10197 10198
3
3
Even though the tools are tested to 10,000 volts A.C., always inspect your tools before using them.
Sockets, Accessory Tools
ASTM F1505 Standard Hexagon Sockets
Socket & Ratchet Sets
⁄2" Drive
1
⁄8" Drive
3
Standard Depth
Deep Depth
Standard Depth
Deep Depth
Code#
Size
Code#
Size
Code#
Size
Code#
Size
10200 10201 10202 10204 10206 10208 10210 10212 10214 10216 10217 10218 10221
⁄16" ⁄4" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 15 ⁄16" 7 ⁄8" 1"
10220 10222 10224 10226 10228 10230 10232 10233 10234 10267
⁄8" ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 11⁄2"
10240 10242 10244 10246 10248 10250 10252 10254 10256 10258 10260 10262 10264 10266 10268 10269
⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 1 1 ⁄16" 11⁄8" 11⁄4" 1 3⁄8" 15⁄8"
10270 10272 10274 10276 10278 10280 10282 10284 10286 10288 10290 10292 10294 10295
⁄8" ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 1 1 ⁄16" 11⁄8" 11⁄4"
5
1
3
7
Other ranges available, see Price Sheet for details. Code#
Drive
01100–01126 01140–01157 01167–01182 01266–01282 01192–01214
1
⁄4" ⁄4" 3 ⁄8" 3 ⁄8" 1 ⁄2" 1
Range
Depth
3
3
7
⁄32" – ⁄16" STD 4mm–13mm STD 7mm–22mm STD 6mm–22mm DEEP 10mm–32mm STD 5
9
Male Hexagon Adapter ⁄4" Dr. - 2" Length
1
Code#
Sets Code# Pcs. Drive
01241 01261 01262 01263 01230 01301
6 4 7 9 8 7
Sizes
⁄4" 1⁄8" – 5⁄16" ⁄8" 1⁄4", 5⁄16", 3⁄8", 7⁄16" 3 ⁄8" 1⁄8" – 1⁄2", w/o 5⁄32" & 7⁄32" 3 ⁄8" 1⁄8" – 1⁄2" 1 ⁄2" 1⁄4" – 3⁄4" 4mm - 10mm 1 3
⁄8" Dr. - 21⁄4" Length
3
Code#
Size "
01294 01295 01296 01297 01298 01299 01300
4mm 5mm 6mm 7mm 8mm 9mm 10mm
01231 01232 01234 01236 01238 01240
Size
⁄8" ⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 1
5
10199
11198 Code#
Pcs.
01130 01131 01132 01138 01160 01188 01190 01215 01216 01283 01284 10179 10181 10183 10199 10219 10238 10239 11198
11 11 12 17 14 15 13 17 15 13 19 12 9 14 12 10 9 12 25
11199 11200 11215
11 11 10
⁄8" Dr. - 21⁄4" Length
3
Code#
01244 01246 01248 01250 01252 01254 01256 01258 01260
Size
⁄8" ⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 1
Description
⁄4" Dr. 6 Pt. Socket Set, 5⁄32" thru 9⁄16" ⁄4" Dr. Ratchet, 2" Ext., Sockets 7⁄32" thru 9⁄16" 1 ⁄4" Dr. Ratchet, 2" Ext., Sockets 3⁄16" thru 9⁄16" 1 ⁄4" Dr. Ratchet, 2" Ext., Sockets 3⁄16" thru 9⁄16", Male Hex Bits 1⁄8" thru 5⁄16" 1 ⁄4" Dr. Ratchet, 2" Ext., Sockets 4mm thru 12mm 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 10mm thru 22mm 3 ⁄8" Dr. Deep Metric Socket Set 10mm thru 22mm 1 ⁄2" Dr. Ratchet, 5" Ext., Sockets 10mm thru 32mm 1 ⁄2" Dr. Socket Set, 10mm thru 32mm 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 10mm thru 19mm & 22mm 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 6mm thru 22mm 1 ⁄4" Dr. Ratchet, 2" Ext., Sockets 3⁄16" thru 1⁄2" 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 3⁄8" thru 3⁄4" 1 ⁄2" Dr. Ratchet, 5" Ext., Sockets 3⁄8" thru 1" & Breaker Bar 3 ⁄8" Dr. Ratchet, 3" Ext., Sockets 5⁄16" thru 7⁄8" 3 ⁄8" Dr. Sockets 5⁄16" thru 7⁄8" 3 ⁄8" Dr. Ratchet, 3" Ext., Deep Sockets 3⁄8" thru 3⁄4" 3 ⁄8" Dr. Ratchet, 3" & 6" Ext., Sockets 3⁄8" thru 7⁄8" 1 ⁄2" Dr. Ratchet, 5" Ext., 8" “T” Handle, Sockets 3⁄8" thru 1 1⁄4", Male Hex Bits 1⁄4" thru 3⁄4" 3 ⁄8" Dr. Ratchet, 3" & 6" Ext., Sockets 3⁄8" thru 13⁄16" 3 ⁄8" Dr. Ratchet, 3" and 6" Ext., Deep Sockets 3⁄8" thru 13⁄16" 3 ⁄8" Dr. Metric Socket Set, 10mm thru 19mm 1 1
5
Substation Roll
⁄2" Dr. - 23⁄4" Length
1
Code#
01218 01219 01220 01222 01224 01226 01228 01229
Size
⁄4" ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 3 ⁄4" 1
5
4" length add “L” to Code# (1⁄2" Dr. only)
Tools are laser marked for permanent identification.
Code#
Description
13432 13433
Composite Sub-Station Tool Roll #13352 & Roll #13360 Composite Sub-Station Tool Roll #13353 & Roll #13360
4
Screwdrivers, Switchboard Matting, Accessory Tools Switchboard Corrugated Matting
European Style Drivers
• ASTM D178-93 Type 1 Insulating—Non-Oil Resistant
Slotted SD
Switchboard matting is rubber matting designed for electrical insulation, as a floor covering to prevent shock around high voltage electrical apparatus, fuse boxes, switchgear, control panels, and heavy machinery. It meets and exceeds current ASTM, ANSI, (plus IEC Division of ANSI, Tech. Committee-78) specifications for this material. In addition, OSHA requirement’s intent to eliminate the electrical hazards of high voltage shock in the workplace is abundantly clear. CIP switchboard matting is designed specifically for this purpose. IT IS NOT DESIGNED TO BE USED AS A “HOT” RAIL BLANKET. ALSO, MATTING WITH PUNCTURES OR CRACKS SHOULD NOT BE PLACED IN SERVICE. Code#
20531 20532 20533 20534 20541 20542 20543 20544 20551 20552 20553 20554
Dielectric Test Voltage
20,000 20,000 20,000 20,000 30,000 30,000 30,000 30,000 40,000 40,000 40,000 40,000
Thickness 3
⁄16" ⁄16" 3 ⁄16" 3 ⁄16" 1 ⁄4" 1 ⁄4" 1 ⁄4" 1 ⁄4" 3 ⁄8" 3 ⁄8" 3 ⁄8" 3 ⁄8" 3
Size
Class
Max. Use Voltage
36" x 12" 36" x 24" 36" x 36" 36" x 48" 36" x 12" 36" x 24" 36" x 36" 36" x 48" 36" x 12" 36" x 24" 36" x 36" 36" x 48"
1 1 1 1 2 2 2 2 3 3 3 3
7,500 7,500 7,500 7,500 17,000 17,000 17,000 17,000 26,500 26,500 26,500 26,500
Phillips SD Size
Code#
Size
⁄32" X 3" 5 ⁄32" X 4" 3 ⁄16" X 5" 1 ⁄4" X 6" 5 ⁄16" x 7" 3 ⁄8" x 8"
13080 13082 13084 13086
#0 x 21⁄2" #1 x 3" #2 x 4" #3 x 6"
Code#
13070 13072 13074 13076 13077 13078
3
Metric Nutdrivers Code#
05300 05305 05310 Screwdriver Sets 05315 Code# Pcs. Sizes 05320 13090 8 3⁄32" x 3", 5⁄32" x 4", 3⁄16" x 5", 1⁄4" x 6", 05325 05330 #0 x 21⁄2", #1 x 3", #2 x 4", 05335 Voltage Tester 05340
Size
5.5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm 13mm
Voltage Tester Code#
13088
Metric Nut Drivers
Composite Nut Starter
• Fiberglass composite (non-conductive) shaft • Magnetic on opposite end to help retrieve fasteners Code#
Description
00563 Composite Nut Starter
Length
7"
Capacity
4-40 (2.5mm) to 5⁄16" (8mm)
Insulated Inspection Mirror Code#
14301 14303
• 14" long with 21⁄4" adjustable mirror • 15" long with 31⁄4" adjustable mirror
Code#
Description
Size
Length
05300 05305 05310 05315 05320 05325 05330 05335 05340
Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver Metric Nut Driver
5.5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm 13mm
125mm 125mm 125mm 125mm 125mm 125mm 125mm 125mm 125mm
Nutdriver Sets Code# Pcs.
Sizes
05370
5.5mm thru 13mm
9
Offset Screwdriver Slotted
Insulated Adjustable Magnetic Retrieving Tool Code#
14302
• 18" handle
5
• Torx see Code #00590 thru #00603 in Price Sheet
Phillips
Code#
Size
Code#
Size
00564 00566 00568 00570 00572 00574 00576
2-4 x 3" 4-6 x 3" 6-8 x 41⁄4" 8-10 x 41⁄4" 10-12 x 5" 12-14 x 6" 14-16 x 6"
00578 00580 00582
#1 x 43⁄4" #2 x 51⁄2" #3 x 6"
No energized work should be done without a written and approved procedure.
ASTM F1505 Standard
Composite Tools
COMPOSITE TOOLS Leading Edge Technology Manufactured from braided, military grade fiberglass composite over a tough polymer core, Composite Tools combine the latest in space age materials technology with traditional heat treated steel tips in a unique family of products ideal for the safety-minded professional tool user.
• Inherent safety—the insulating properties are built into the tool, not coated onto it • Lightweight • Better balanced • Exceeds ASME torque standards • Exceeds the strength of the proper fastener • One year warranty
\COMPOSITE COMPOSITE SCREWDRIVERS
COMPOSITE NUT DRIVERS
• • • •
Cushion grip Slotted electrician’s tip Phillips tip Robertson tip
Code#
Size
00813 00814 00820 00822 00823 00844 00846 00847 00848 00849 00850
⁄8" x 3" ⁄8" x 6" 1 ⁄4" x 7" 5 ⁄16" x 41⁄2" 5 ⁄16" x 7" 3 ⁄16" x 5" 3 ⁄16" x 6" 1 ⁄4" x 41⁄2" 1 ⁄4" x 6" 5 ⁄16" x 6" 3 ⁄8" x 7"
6" Length
3" Length
Slotted Tip
1 1
• Cushion grip • Hollow hexagon shaft • 3" and 6" shaft lengths
Code#
Size
Code#
Size
00880 00881 00882 00883 00884 00885 00886 00887 00888 00889 00890
⁄16" 7 ⁄32" 1 ⁄4" 9 ⁄32" 5 ⁄16" 11 ⁄32" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8"
00891 00892 00893 00894 00895 00896 00897 00898 00899 00900 00901
⁄16" ⁄32" 1 ⁄4" 9 ⁄32" 5 ⁄16" 11 ⁄32" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8"
3
3 7
Sets Phillips Tip
Robertson Tip
Code#
Size
Code#
Size
00851 00852 00853 00856 00858 00859 00952
#0 x 3" #1 x 5" #0 x 6" #2 x 41⁄2" #2 x 7" #3 x 6" #1 x 3"
00860 00861 00862 00864 00866 00868
#0 x 3" #0 x 6" #1 x 5" #2 x 41⁄2" #2 x 6" #3 x 7"
3" Code# 6" Code# Pcs. Sizes
00920 00921 00922 00923
00925 00926 00927 00928
7 8 9 10
⁄16", 1⁄4", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" ⁄16", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" 3 ⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" 3 ⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2", 9⁄16" 3 3
COMPOSITE MALE HEXAGON DRIVERS 6" Length
3" Length Screwdriver Sets Code# Code# Pcs.
Sizes
00871 00869 00870 00872
#1, #2, 1⁄8" x 3", 3⁄16" x 6", 1⁄4" x 6", 5⁄16" x 6" #1, #2, 1⁄8" x 3", 1⁄8" x 6", 3⁄16" x 6", 1⁄4" x 6", 5⁄16" x 6", 3⁄8" x 7" #1, #2, #3, 1⁄8" x 3", 1⁄8" x 6", 3⁄16" x 5", 3⁄16" x 6", 1⁄4" x 41⁄2", 1⁄4" x 6", 5⁄16" x 6", 3⁄8" x 7" #2, #3, 3⁄16" x 6", 1⁄4" x 6", 3⁄8" x 7"
6 8 11 5
Sets 3" Code# 6" Code# Pcs. Sizes
00633 00634
00653 00654
4 6
⁄16", 1⁄4", 5⁄16", 3⁄8" ⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8"
3 5
00620 00621 00622 00623 00625 00627
Size
Code#
⁄32" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8"
00640 00641 00642 00643 00645 00647
5
Size
⁄32" ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 3 ⁄8" 5 3
COMPOSITE HOLDING SCREWDRIVERS & NUT STARTERS COMPOSITE HAND DRIVER
Holding SD Code#
• Convenient twist-tip design for onehand use • Fiberglass composite (non-conductive) shaft • Magnetic on opposite end to help retrieve fasteners
00560 00562
Code# Size
Length
Type
⁄16" #2
6" 6"
Slotted Phillips
3
• Accommodates 1/4" Sq. Dr. Sockets
Nut Starter Code#
Capacity
00563
4-40 (2.5mm) to 5⁄16" (8mm)
00812
• 5" Length • Accommodates most standard 1⁄4" hex bits
Length
⁄4" 1 ⁄4"
3" 6"
1
COMPOSITE MAGNETIC BIT TIP SYSTEM Code#
Bits
10460
3
10461
BIT HOLDER EXTENSION BAR FOR CORDLESS DRILL Code#
Drive
00810 00811
• • • •
⁄16" and 1⁄4" Flat, #1 and #2 Phillips 3 ⁄16" and 1⁄4" Flat, #1 and #2 Robertson
Accommodates most standard ⁄4" hex bits Powerful magnet (800 grams) securely holds bits in place Can also be used as a 1⁄4" nut driver Convenient see-through handle stores eight standard bits 1
Only qualified persons may work on electrical circuit parts or equipment that have not been de-energized—29CFR1910.332
6
Open End Wrenches, Box End Wrenches, Tools Rolls
ASTM F1505 Standard
Basic Electrician’s Roll (9 pcs.)
Box End & Open End Wrenches
9" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 7" Needle Nose Pliers Combination Stripper & Crimper #2 x 6 Square (Robertson) Screwdriver* 3 ⁄16" x 6" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* # 1 x 3 Phillips Screwdriver* # 2 x 4 Phillips Screwdriver*
Box End Wrenches Metric
Standard Code#
10340 10342 10344 10346 10348 10350 10352 10354 10356 10358 10360 10362 10364 10366 10368 10370 10373 10374 10376
• Long style
Box End Sets Code# Pcs.
Sizes
10372 01438 10371 10375 10377
1
11 11 8 10 13
Size 1
⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 11⁄16" 11⁄8" 11⁄4" 13⁄8" 11⁄2" 15⁄8"
⁄4" thru 7⁄8" 10mm thru 27mm 3 ⁄8" thru 13⁄16" 1 ⁄4" thru 13⁄16" 1 ⁄4" thru 1"
Code#
Size
01402 01404 01406 01408 01410 01412 01414 01416 01418 01420 01421 01422 01423 01424 01425 01426 01427 01428 01429 01430 01431 01432 01433 01434 01435 01436
6 mm 7mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm 26 mm 27 mm 28 mm 29 mm 30 mm 32 mm
Code#
* 13302
Composite Tools
Meter Reader (Routeman) Roll (10 pcs.) 8" Needle Nose Pliers 3 ⁄16" x 6" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* # 1 x 3 Phillips Screwdriver* # 2 x 8 Phillips Screwdriver* Fuse Puller Plug Wrench 5 ⁄16" Nut Driver* 3 ⁄8" Nut Driver* 1 ⁄2" Nut Driver*
Open End Wrenches Metric
Standard Code#
10300 10302 10304 10306 10308 10310 10312 10314 10316 10318 10320 10322 10324 10326 10328 10330 10337 10338 10339
Open End Sets Code# Pcs.
Sizes
10332 01338 10331 10336 10335
1
7
11 11 8 10 13
⁄4" thru 7⁄8" 10mm thru 27mm 3 ⁄8" thru 13⁄16" 1 ⁄4" thru 13⁄16" 1 ⁄4" thru 1"
Size 1
⁄4" ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4" 13 ⁄16" 7 ⁄8" 15 ⁄16" 1" 11⁄16" 11⁄8" 11⁄4" 13⁄8" 11⁄2" 15⁄8" 5
Code#
Size
01302 01304 01306 01308 01310 01312 01314 01316 01318 01320 01321 01322 01323 01324 01325 01326 01327 01328 01329 01330 01331 01332 01333 01334 01335 01336
6 mm 7mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm 26 mm 27 mm 28 mm 29 mm 30 mm 32 mm
Code#
* 13393 * 13394
w/ Composite Tools 3" Nut Drivers w/ Composite Tools 6" Nut Drivers
Meter Service Roll (12 pcs.) 9" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 8" Needle Nose Pliers 1 ⁄8" x 3" Slotted Screwdriver* #2 x 6 Square (Robertson) Screwdriver* 3 ⁄16" x 6" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* Fuse Puller Plug Wrench 5 ⁄16" Nut Driver* 3 ⁄8" Nut Driver* 1 ⁄2" Nut Driver* Code#
* 13383 * 13384
Tool boxes instead of rolls available upon request.
w/ Composite Tools 3" Nut Drivers w/ Composite Tools 6" Nut Drivers
ASTM F1505 Standard Nut Screwdriver Roll (11 pcs.)
Tool Rolls Telecommunications Tool Roll (16 pcs.)
1
⁄8" x 3" Slotted Screwdriver* #2 x 6 Square (Robertson) Screwdriver* 3 ⁄16" x 6" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* 3 ⁄16" Nut Driver* 7 ⁄32" Nut Driver* 1 ⁄4" Nut Driver* 9 ⁄32" Nut Driver* 5 ⁄16" Nut Driver* 11 ⁄32" Nut Driver* 3 ⁄8" Nut Driver*
Code#
* 13352 * 13353
Code#
w/ Composite Tools 3" Nut Drivers w/ Composite Tools 6" Nut Drivers
* 13442 Composite Tools
9" Linesman Pliers 6" Needle Nose Pliers 8" Slip Joint Pliers 3 ⁄16" x 5" Elect. Slotted Screwdriver w/Cushion Grip* 1 ⁄4" x 41⁄2" Slotted Screwdriver w/Cushion Grip* 5 ⁄16" x 6" Slotted Screwdriver w/Cushion Grip* 3 ⁄8" x 7" Slotted Screwdriver w/Cushion Grip* # 2 x 4 Phillips Screwdriver w/Cushion Grip* 3 ⁄8" Reversible Ratchet 3 ⁄8" Reversible Torque Wrench 30-150"# 3 ⁄8" Drive 3" Extension 3 ⁄8", 7⁄16", 1⁄2", 9⁄16" Hex Sockets 3⁄8" Drive STD Depth 5 ⁄8" Hex Socket 3⁄8" Drive Deep Depth
Gas Service Roll (11 pcs.) 7" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 8" Needle Nose Pliers 1 ⁄8" x 3" Slotted Screwdriver* 3 ⁄16" x 5" Slotted Screwdriver* 1 ⁄4" x 6" Slotted Screwdriver* Fuse Puller Plug Wrench 5 ⁄16" Nut Driver* 3 ⁄8" Nut Driver* 1 ⁄2" Nut Driver*
Substation Roll (18 pcs.) Code#
13432 Composite Tools—Consists of #13352 or #13353 and #13360 13433 Composite Tools—Consists of #13353 and #13360
Belt Pouches 13202 Meter Service Pouch
Composite Knife 1 ⁄8" x 4" Slotted Composite Screwdriver 1 ⁄4" x 6" Slotted Composite Screwdriver 5 ⁄16" x 6" Slotted Composite Screwdriver #2 x 4" Phillips Composite Screwdriver Wire Stripper 71⁄2" Diagonal Cutter 10" Water Pump Pliers * 8" Adjustable Wrench 9" Linesman Pliers 6" Needle Nose Slotted Composite Holding Screwdriver 3 ⁄8" x 3" Composite Hex Nut Driver 1 ⁄2" x 3" Composite Hex Nut Driver 5 ⁄8" x 3" Composite Hex Nut Driver
Code#
* 13372 * 13373
w/ Composite Tools 3" Nut Drivers w/ Composite Tools 6" Nut Drivers
Tool Roll (7 pcs.) 9" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 6" Needle Nose Pliers Combination Stripper & Crimper Fuse Puller Crimper Plastic Pliers
13204 Electrician’s Service Pouch
* Flashlight and tape not included * 8" Adjustable Wrench not insulated per ASTM F1505 Standard—insulated against grounding only
Code#
13360
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
Composite Knife 1 ⁄8" x 4" Slot. Composite Screwdriver 3 ⁄16" x 5" Slot. Composite Screwdriver 1 ⁄4" x 6" Slot. Composite Screwdriver #2 x 4" Phillips Composite Screwdriver Wire Stripper 71⁄2" Diagonal Cutter 10" Water Pump Pliers Fuse Puller 9" Linesman Pliers 6" Needle Nose 3 ⁄16" x 3" Composite Hex Nut Driver 1 ⁄4" x 3" Composite Hex Nut Driver 5 ⁄16" x 3" Composite Hex Nut Driver 3 ⁄8" x 3" Composite Hex Nut Driver
8
Tool Boxes and Sets
ASTM F1505 Standard
Tool Boxes All Sets Contain: 3
9" Linesman Pliers 71⁄2" Diagonal Cutting Pliers 7" Needle Nose Pliers Voltage Tester 1 ⁄8" x 3" Slotted Screwdriver*
⁄16" x 5" Slotted Screwdriver* ⁄4" x 6" Slotted Screwdriver* # 1 x 5 Phillips Screwdriver* # 2 x 4 Phillips Screwdriver* 1
Additional Contents: Deluxe Electrician’s Tool Box
Deluxe Maintenance Tool Box
Std. Maintenance Tool Box
1
1
⁄2" Reversible Ratchet 5" Extension 1⁄2" Drive 10" Extension 1⁄2" Drive Hex Sockets: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4"
⁄2" Drive 8" “T” Handle Hex Sockets: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4" Open End Wrench: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4"
Code#
Code#
⁄2" Reversible Ratchet 5" Extension 1⁄2" Drive Hex Sockets: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4" Open End Wrench: 3 ⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4" Code#
* 13411 w/ Composite Tools * 13401 w/ Composite Tools * 13413 w/ Composite Tools * 13403 w/ Composite Tools Tool Box Style
1
Tool Box Style
* 13421 w/ Composite Tools * 13423 w/ Composite Tools Tool Box Style
Deluxe Maintenance Tool Box Shown
Insulated Tool Sets 9" Linesman Pliers 6" Diagonal Cutting Pliers 6" Needle Nose Pliers Crimper 8" Slip Joint 10" Water Pump Pliers 3 ⁄16" x 5" Cushion Grip Elect. Slotted Screwdriver* 1 ⁄4" x 6" Cushion Grip Slotted Screwdriver* 1 ⁄4" x 41⁄2" Cushion Grip Slotted Screwdriver* 5 ⁄16" x 6" Cushion Grip Slotted Screwdriver* # 1 x 5 Cushion Grip Phillips Screwdriver* # 2 x 4 Cushion Grip Phillips Screwdriver* 3 ⁄16", 1⁄4", 5⁄16", 3⁄8" Hex Wrench 1 ⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2" Cushion Grip Hex Nut Driver (3" Shaft)* Code#
* 13407 * 13409
9
Composite Tools Composite Tools w/ 6" Nut Drivers
Custom tool sets can be created from any combination of tools in this catalog.
Tool Boxes and Sets Deluxe Telecommunications Toolbox 1
⁄8" x 3" Slotted Screwdriver ⁄16" x 5" Slotted Screwdriver 1 ⁄4" x 6" Slotted Screwdriver # 1 x 5 Phillips Screwdriver # 2 x 4 Phillips Screwdriver 9" Linesman Pliers 8" Needle Nose Pliers 71⁄2" Diagonal Cutting Pliers 3 ⁄8" Drive Reversible Ratchet 3 ⁄8" Drive 3" Extension 3 ⁄8" Drive 6" Extension 30" – 150" # Torque Wrench 3 ⁄8" Drive Deep Sockets 3⁄8" thru 13⁄16" Box Wrenches 3⁄8" thru 13⁄16" Mini Flashlight 3
Code#
13449 13447
“Briefcase” Style Toolbox Style (shown in #16026 below)
The Hot Box®
The Hot Box® 1
⁄8" x 3" Slotted Screwdriver #2 x 6” Square (Robertson) Screwdriver 3 ⁄16" x 6" Slotted Screwdriver Cushion Grip* 1 ⁄4" x 6" Slotted Screwdriver Cushion Grip* 5 ⁄16" x 6" Slotted Screwdriver Cushion Grip* # 2 x 4" Phillips Screwdriver Cushion Grip* # 2 x 7" Phillips Screwdriver Cushion Grip* 9" Linesman’s Pliers 8" Needle Nose Pliers 71⁄2" Diagonal Cutting Pliers 91⁄2" Cable Cutters 10" Water Pump Pliers
Combination Stripper/Crimper 14 pcs. 1⁄16" – 1⁄2" Allen Hex Wrench Set 3 ⁄8" Drive Reversible Ratchet 3 ⁄8" Drive 3" Extension 3 ⁄8" Drive 6" Extension 10 pcs. 5⁄16" – 7⁄8" 3⁄8" Dr. Hex Socket Set 11 pcs. 1⁄4" – 7⁄8" Box End Wrench Set 3 ⁄16" x 6" Nut Driver Cushion Grip* 1 ⁄4" x 6" Nut Driver Cushion Grip* 5 ⁄16" x 6" Nut Driver Cushion Grip* 11 ⁄32" x 6" Nut Driver Cushion Grip* 3 ⁄8" x 6" Nut Driver Cushion Grip* 7 ⁄16" x 6" Nut Driver Cushion Grip* 1 ⁄2" x 6" Nut Driver Cushion Grip* 30" – 150"# Torque Wrench°
Code#
* 16027 °*16029
Composite Tools Composite Tools w/ Torque Wrench
M16027 w/ Metric Sockets, Nut Drivers, and Box Wrenches M16029 w/ Torque Wrench, Metric Sockets, Nut Drivers, and Box Wrenches 16051 16052
w/ 1⁄2" Drive Ratchet, Sockets, and Extensions w/ 1⁄2" Drive Torque Wrench, 1⁄2" Drive Ratchet, Sockets, and Extensions
M16051 w/ 1⁄2" Drive Metric Sockets, Nut Drivers, and Box Wrenches M16052 w/ 1⁄2" Drive Torque Wrench, Metric Sockets, Nut Drivers, and Box Wrenches
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
10
Insulating Blankets and Accessories, Glove Accessories 7.5 KV PVC Insulating Roll
Sleeves
• With bag, straps & fasteners
Code#
Class
Max. Volts
Size
21080 21082 21084 21090 21092 21094
0 0 0 2 2 2
1,000 1,000 1,000 20,000 20,000 20,000
Reg Large X-Large Reg Large X-Large
Code#
Description
21096 21097
Sleeve Fasteners, 6 / bag Sleeve Straps Regular, w/ buttons Sleeve Straps Extra Large, w/ buttons Replacement Sleeve Bag
21098 22300
• Meets ASTM F1742-96 Standard • Transparent, tested @ 10 KV • Cut amount needed, discard when finished
Code#
Description
Size
20307 20309
7.5 KV Insulating Roll 7.5 KV Insulating Roll
20312
Wood Container for Roll
20302 20317
4' x 50' Kit (Roll and Container) 4' x 25' Kit (Roll and Container)
Glove Inflator Code#
4' x 50' 4' x 25'
51200
Proper safety calls for frequent on-the-job inspection of equipment for mechanical damage. Inflators offer a quick, easy way to do a complete and thorough visual inspection of rubber gloves.
Electrical Insulating Protective Shielding • Type 2 Insulating—Flame, Oil, and Ozone Resistant Electrical insulating rubber shielding is engineered to protect personnel, equipment, and work areas from electrical hazards up to 26,500 volts. The shielding is flame, oil, ozone, and puncture resistant, remains flexible to -60° F, and will not melt. CIP’s insulating shielding is available in convenient “safety yellow” rolls, and is 100% tested to meet ASTM standards.
Glove Cleaner Code#
20336
Code#
Size
Max Use Voltage
20332 20333 20335
36" x 25' 36" x 25' 36" x 36"
1,000 7,500 26,500
Liquid cleaner is ideal for cleaning rubber protective equipment. this concentrated, water-based detergent soap is formulated with special grease cutters. It is highly effective in removing oil, grease, and dirt from all types of rubber equipment such as linemen’s gloves, sleeves, blankets, etc. • 1 gallon liquid cleaner
Type I Insulating Blankets and Accessories
Talc
• Meets ASTM D1048-98 Standard Code#
Description
20304
36" x 36" Class “O” Type I (1000V Max.) Blanket 36" x 36" Class “2” Type I (20,000V Max.) Blanket Blanket Canister 36" x 36" Class “2” Blanket Kit (Blanket, Clamps, & Canister) 36" x 36" Class “O” Blanket Kit (Blanket, Clamps, & Canister) Blanket Clamps (set of 2) Magnetic Blanket Button
20305 20310 20300
20301
20320 20299
Description
51202 51204
1 Gal. Container Case 12–8 fl. oz. bottles
For maximum on-the-job comfort, this cooling powder absorbs moisture and perspiration while minimizing friction inside rubber insulating gloves and sleeves. It also acts as a lubricant to keep equipment from sticking. Talc does not harm the skin or reduce dielectric values of the equipment.
Glove Liners, Pair • Knit Cotton
11
Code#
ASTM F1742, ASTM D1051, ASTM D1048 Standards
Code#
Size
51210 51212
10" 14"
Hook Stick, Arc Blankets, Grounding Sets Safety Rescue Hook Code#
32514
Width
12
Length
9’
Arc Suppression Blankets
Code#
Size
20340 20342 20342
4' x 5' 4' x 8' 5' x 8'
Kits
Arc Suppression Blankets are built with the latest fabric technologies to provide a passive barrier from peripheral arc blasts. ideal for confined spaces such as underground vaults, the blanket will reduce the effects of an arc blast occurring beyond the primary work area. An ideal compliment to personal protective apparel, the Arc Suppression Blanket, when properly used, will reduce the extent of the worker’s exposure during an open arc event.
Code#
Description
20343 20344
4' x 5' Arc Blanket Kit 5' x 8' Arc Blanket Kit
Constructed with a multilayer design, including Dupont® Kevlar®, the blanket is designed to deflect the energy of the arc blast. The blanket is fitted with strong Kevlar® straps with carabiners developed specifically for this application.
Grounding Sets Code# • 21 kA 15 cycles 26800 • ASTM Grade 5 • Set includes: – four-way connector w/ sleeves – four 11⁄2" smooth jaw clamps w/ sleeves – double hanger stud – contact stud – 34' 1/0 Cu cable – four pair ferrules
Grounding Clusters are used to make it easy for a single line worker to apply multiple grounding jumpers. All clusters have the option of a ground lead by using the extra connection point included on each cluster.
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
12
Insulating Gloves Insulating Gloves
Employees working in areas where there are potential electrical hazards shall be provided with, and shall use, electrical protective equipment that is appropriate for the specific parts of the body to be protected and for the work to be performed.
Even though you are using insulated tools, you must still wear the required gloves. The gloves protect the hands and wrist. Size
Length
Class
Description
Glove
+ Protector + Glove Bag =
Kit
7 8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
11" 11" 11" 11" 11" 11" 11" 11" 11" 11"
00 00 00 00 00 00 00 00 00 00
Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max)
51296 51298 51299 51300 51301 51302 51303 51304 51305 51306
51290 51291 51291 51292 51293 51293 51294 51294 51295 51295
22100 22100 22100 22100 22100 22100 22100 22100 22100 22100
52296 52298 52299 52300 52301 52302 52303 52304 52305 52306
7 8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
11" 11" 11" 11" 11" 11" 11" 11" 11" 11"
0 0 0 0 0 0 0 0 0 0
Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max)
51110 51111 51112 51113 51114 51115 51116 51117 51118 51119
50301 50302 50303 50303 50305 50305 50307 50307 50309 50309
22100 22100 22100 22100 22100 22100 22100 22100 22100 22100
51100 51101 51102 51103 51104 51105 51106 51107 51108 51109
8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
14" 14" 14" 14" 14" 14" 14" 14" 14"
2 2 2 2 2 2 2 2 2
High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max) High Voltage (20 KV Max)
20160 20161 20163 20164 20165 20166 20167 20168 20169
20001 20003 20003 20005 20005 20007 20007 20009 20009
22200 22200 22200 22200 22200 22200 22200 22200 22200
20171 20172 20173 20174 20175 20176 20177 20178 20179
Class 00 High Dexterity Gloves
Class 0 and Class 00 Glove Kit
Class 2 Glove Kit
Employees shall use insulated tools and/or handling equipment when working inside the limited approach boundary of live parts where tools or handling equipment might make accidental contact. Approach Boundaries to Live Parts for Shock Protection Nominal System Voltage Range Phase to Phase
Exposed Movable Conductor
Exposed Fixed Circuit Part
Restricted Approach Boundary Incl. Inadvertent Movement
Prohibited Approach Boundary
0 to 50 51 to 300 301 to 750
Not Specified 10 ft 0 in 10 ft 0 in
Not Specified 3 ft 6 in 3 ft 6 in
Not Specified Avoid Contact 1 ft 0 in
Not Specified Avoid Contact 0 ft 1 in
751 to 15 kV 15.1 kV to 36 kV 36.1 kV to 46 kV
10 ft 0 in 10 ft 0 in 10 ft 0 in
5 ft 0 in 6 ft 0 in 8 ft 0 in
2 ft 2 in 2 ft 7 in 2 ft 9 in
0 ft 7 in 0 ft 10 in 1 ft 5 in
46.1 kV to 72.5 kV 72.6 kV to 121 kV 138 kV to 145 kV
10 ft 0 in 10 ft 8 in 10 ft 0 in
8 ft 0 in 8 ft 0 in 10 ft 0 in
3 ft 3 in 3 ft 2 in 3 ft 7 in
2 ft 1 in 2 ft 8 in 3 ft 1 in
161 kV to 169 kV 230 kV to242 kV 243 kV to 362 kV
11 ft 8 in 13 ft 0 in 15 ft 4 in
11 ft 8 in 13 ft 0 in 15 ft 4 in
4 ft 0 in 5 ft 3 in 8 ft 6 in
3 ft 6 in 4 ft 9 in 8 ft 0 in
500 kV to 550 kV 765 kV to 800 kV
19 ft 0 in 23 ft 9 in
10 ft 0 in 23 ft 9 in
11 ft 3 in 14 ft 11 in
10 ft 9 in 14 ft 5 in
13
Only qualified persons may work on electric circuit parts or equipment that have not been de-energized using proper procedures. Such persons shall be capable of working safely on energized circuits and shall be familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding equipment, and insulated tools.
ASTM F1505 Standard
Insulating Gloves, Dielectric Boots Insulating Gloves Size
Length
Class
Description
Glove
+ Protector + Glove Bag =
Kit
7 8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
14" 14" 14" 14" 14" 14" 14" 14" 14" 14"
00 00 00 00 00 00 00 00 00 00
Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max) Low Voltage (500 V Max)
51307 51308 51309 51310 51311 51312 51313 51314 51315 51316
51318 51319 51320 51320 51321 51321 51322 51322 51323 51323
22200 22200 22200 22200 22200 22200 22200 22200 22200 22200
51325 51326 51327 51328 51329 51330 51331 51332 51333 51334
7 8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
14" 14" 14" 14" 14" 14" 14" 14" 14" 14"
0 0 0 0 0 0 0 0 0 0
Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max) Low Voltage (1000 V Max)
51120 51121 51122 51123 51124 51125 51126 51127 51128 51129
51130 51131 51132 51132 51133 51133 51134 51134 51135 51135
22200 22200 22200 22200 22200 22200 22200 22200 22200 22200
51137 51138 51139 51140 51141 51142 51143 51144 51145 51146
8 81⁄2 9 91⁄2 10 101⁄2 11 111⁄2 12
14" 14" 14" 14" 14" 14" 14" 14" 14"
1 1 1 1 1 1 1 1 1
High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max) High Voltage (10 KV Max)
20140 20141 20142 20143 20144 20145 20146 20147 20148
20001 20001 20003 20003 20005 20005 20007 20007 20009
22200 22200 22200 22200 22200 22200 22200 22200 22200
20150 20151 20152 20153 20154 20155 20156 20157 20158
Please order the proper size.
In order to determine the proper size for Class 0 and 00 insulating gloves, use a tape measure to find the circumference of your hand around the palm. For example, 8" means your Class 0 and 00 glove size is 8. For Class 2 gloves add 1 ⁄2 size to allow for dexterity. For example 8" means your Class 2 glove size is 81⁄2.
In mid-1995, we started putting serial numbers on all our gloves and sleeves which indicate the month and year they were manufactured. It works like this. The following number — which was on a pair of sleeves — indicates they were manufactured in March 2001: C at the beginning tells us manufacturing took place in the third month. A is Jan., B is Feb., C is March, etc.
C400661JA
Two letters on the end indicate the last two digits of the year of manufacture. A is 1, B is 2, C is 3, etc.
Number in the middle is from the dip ticket for the product.
Dielectric Boots Size
Deep Heal Overshoe
17" Full Cut Overshoe
14" Super Dielectric Boot
5 6 7 8 9 10 11 12 13 14 15 16 17
21580 21582 21584 21586 21588 21590 21592 21594 21595 21596 21597 21598 21599
21407 21408 21409 21410 21411 21412 21413 21414 21415 21416 21417
21507 21508 21509 21510 21511 21512 21513 21514 21515 21516 21517
Dielectric Deep Heel Overshoes provide extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are made from an ozone resistant yellow rubber that’s 100% waterproof. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole is an anti-skid bar tread. All of these overshoes meet ANSI Z41 requirements and have been tested to 20,000 volts.
The 14" Super Dielectric Boot offers a high level of protection from electrical shock to utility workers, electric contractors, and others working dangerously close to electrical hazards. These boots meet ASTM F1117 requirements, and have been tested to 15,000 volts AC and 45,000 volts DC. The boots are completely waterproof and resistant to ozone. The tough fabric lining makes the fit comfortable and easy to take on and off.
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
14
Hot Sticks, Grounding Equipment Hot Sticks
Socket Clamps Code#
Description
Length
40090 42150 49935
External Rod Clampstick Universal Switching Stick Fiberglass Hot Switch Stick
6'- 8" 11⁄4" x 8’ 11⁄4" x 8”
Code#
ASTM Grade
Continuous Current Rating
Strain Relief?
21190 21277
5 5
400 400
Yes No
The Ball and Socket Grounding System allows for variable angle accessibility. This system is compact nd lightweight. there are fixed grounding points on the socket clamp. The socket clamp is made from a bronze. The socket size is 1", with a threaded bore boss of 5⁄8"-11 UNC. An integral cable support with strain relief is included.
Ball Studs
40090
Description
Ball Stud Short Ball Stud Long Offset NEMA Pad Cover for Ball Stud
The Ball Stud, short and long, and the Offset Nema Pad Ball Stud are made from a copper alloy, tin-plated. They each have a 1" diameter ball. The long and short ball Stud have a 1⁄2"-13 UNC x 2" thread and a recommended installation torque of 300" lbs. The short stud is used conventionally. the long stud can also be used as the grounding point for “C” or duckbill clamps that have a jaw width of 23⁄4" or less. The Offset Nema Pad ball Stud has the standard Nema bolt hole spacing.
42150 49935
Tubular PVC Storage Container • sized for tools 12" shorter than tube • weather tight • kit includes two mounting brackets, four steel bolts
Code#
21191 21192 21228 21236
Code#
Length
Inner Dia.
41690
9'
6"
The Ball Stud Cover allows for multiple angle application when installed using a clampstick.
Voltage Detector Kit Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks with a splined universal end fitting. Each tester has a 4.5 volt transistor amplifier with an audio/visual indicator. It is recommended that the tester be moved closer to the conductor until warning is indicated, or the unit touches a conductor, apparatus, or test point. Test the unit on a nearby conductor to get verification of “dead”. Each kit includes a 240V – 230kV Tester, Case, Shotgun Adapter, and three “C” batteries. Code#
43560
15
Safety Tools to 1000 Volts A.C. • Insulating Products to 40,000 Volt A.C.
ELECTRICAL ARC FLASH PROTECTION Sample Flash Apparel ATP Values (cal/cm2)
Arc Protection Clothing Requirements • An employee must wear flame-resistant (FR) clothing to work around energized parts. • To evaluate FR clothing materials in order to measure the heat transferred through the fabric, two values are calculated: arc-thermal performance value (ATPV) and heat attenuation factor (HAF). • ATPV is the minimum energy causing the predicted onset of second-degree burns. • HAF is the percentage of total energy of the arc that the fabric prevents from passing through. • Heavier or layers of FR fabrics give higher ATP values. • Clothing shall cover potentially exposed areas as completely as possible.
For arc hazard assessment software, see our website at www.insulatedtools.com/arc_software.html
• Layering of non-FR clothing under an outer shell of FR fabric can give a false sense of security. If the outer layer should break open, the inner clothing could ignite. • Always do a hazard assessment
Acceptable FR Fabrics • INDURA® 100% Cotton is flame resistant for the useful life of the garment. A treatment is used that fixes the flame retardant inside the cotton fibers and allows the clothing to breathe. • Meta aramid (NOMEX®) is blended with 5% para aramid fibers (kevlar) to yield NOMEX® fabrics. • PBI kevlar (60%) and PBI (40%) are blended to produce the fabric known as PBI.
Fabrics Single Layer FR Cotton 7.5 oz. weave . . . . . 6.0 Single Layer FR Cotton 9.8 oz. weave. . . . . . 11 Single Layer Aramid 4.5 oz. weave . . . . . . . . . . . . . . 4.6 Single Layer Aramid 6.0 oz. weave . . . . . . . . . . . . . . 5.6 Single Layer Aramid 7.5 oz. weave . . . . . . . . . . . . . . 7.0 6.0 oz. Aramid over 10 FR Cotton . . . . . . . . . . . . . . 31.0 7.0 oz. Polybenzimidazole Para Aramid Aluminized weave . . . . . . . . . 20.4 6.0 oz. Aluminized Polybenzimidazole Blend Knit over 6.0 oz. FR Cotton Flannel . . . . . . . . . . 55.4 Single Layer INDURA ULTRA SOFT® Material 13 oz. weave . . . . . . . . . . . . . . . 20
Prohibited fabrics and fibers when used alone: acetate, nylon, polyester, and rayon. Flash Protection Arc Shields & Accessories
9 oz. INDURA ULTRA SOFT® over 7 oz. INDURA ULTRA SOFT® . . . . . . . . . . . . . . . . . . . 31
• Permanent anti-fog coating • Light green tint • For use with flame-resistant clothing
9 oz. INDURA ULTRA SOFT® over 12 oz. INDURA ULTRA SOFT® . . . . . . . . . . . . . . . . . . . 40 12 oz. INDURA ULTRA SOFT® over 12 oz. INDURA ULTRA SOFT® . . . . . . . . . . . . . . . . . . . 50 6.8 oz. TUFFWELD® 700 Fabric with Inner Layer of Q9 and NOMEX® CALDURA® Lining . . . . . . . . . . . . . . . . . . . . 50
Code#
52510
52509
52512
52505
52513
Arc Shields Code#
Description
52510 52511 52508 52506 52507 52500 52501
Arc Shield with Hard Hat Arc Shield only Arc Shield/Hard Hat/ Storage Bag Arc Shield/Hard Hat/ Storage Bag/Back Pack Arc Shield/Hard Hat/Back Pack Arc Shield/Hard Hat/ Storage Bag/Tool Back Bag Arc Shield/Hard Hat/Tool Back Pack
cal/cm2
Description
52502 52503 52504 52505 52509 52512 52513 52545 52546 52540 52542
Replacement Lens Hard Hat Adapter 11 cal Flash Protection Glove 50 cal Flash Protection Glove Arc Shield Storage Bag Flash Protection Hot Pack® Flash/ToolHot Pack® NOMEX® Detachable Hood INDURA® Detachable Hood Safety Helmet Class E Safety Glasses
cal/cm2
INDURA ULTRA SOFT® over 2 Layers of 7 oz. INDURA ULTRA SOFT® over 12 oz. INDURA ULTRA SOFT® . . . . . . . . . . . . . . . . . . . 100 TUFFWELD® 1000 Fabric with Inner Layers of Q9 Fabric and NOXEX® CALDURA® Lining . . . . . . . . . 50
10 10 10 10 10 10 10
Shields Clear U/V Face Shield . . . . . . . 1.2 NOT RECOMMENDED Gold Reflective U/V Face Shield . . . . . . . . . . . 7.33
Accessories Code#
52546
The Hot Pack®
10
Arc Shield . . . . . . . . . . . . . . . . 10.0
5.6 11
Safety Tools to 1,000 Volts A.C. • Insulating Products to 40,000 Volts A.C.
16
Arc Protection Clothing and Kits
ARC PROTECTION CLOTHING (FR) AND KITS Electrical Arc Hood • The Flash Arc Hood incorporates UV- and IR-absorbing window providing protection up to 100 cal/cm2. Past generations of gold reflective faceshields only provided up to 7.33 cal/cm2 of protection, and the typical clear faceshield only 1.2 cal/cm2. • The green tint window is coated with a permanent anti-fog inner surface. Code #52509 Storage Bag Available for Hood • Arc Hoods are supplied with Hard Hat Adapter and Safety Helmet.
Flash Protection Clothing (FR)
Navy Blue Parka
®
Ultra Soft INDURA fabric weight 9.8 oz., ATPV 11 cal/cm 2 NOMEX® fabric weight 6.0 oz., ATPV 5.6 cal/cm 2
Small Medium Large X-Large XX-Large XXX-Large XXXX-Large
Flash Jackets and Pants
NOMEX® is a DuPont registered trademark for aramid fiber. TuffWeld® is a registered trademark of Southern Mills, Inc.
52515 52517 52685 52686 52687 52688 52689 52699
Flash Protection Arc Hood Replacement Window Flash Arc Hood Replacement Window Flash Arc Hood Replacement Window Flash Arc Hood Replacement Window
20 20 31 31 50 50 100 100
Navy Blue Lab Coat
Navy Blue Coveralls
Navy Blue Overalls
INDURA®
NOMEX®
INDURA®
NOMEX®
INDURA®
NOMEX®
52550 52552 52554 52556 52557 52558 52559
52620 52622 52624 52626 52628 52630 52632
52650 52651 52652 52653 52654 52655 52656
52635 52636 52637 52638 52639 52640 52641
52580 52582 52584 52586 52587 52588 52589
52590 52592 52594 52595 52596 52597 52598
52560 52562 52564 52566 52568 52570 52572
52660 52662 52664 52666 52668 52670 52672
31 cal/cm 2
Single-layer 13oz. Navy Blue Ultra Soft INDURA®. Thread— NOMEX®/Kevlar.
Medium Large X-Large XX-Large XXX-Large XXXX-Large XXXXX-Large
cal/cm1
NOMEX®
Coat
INDURA® is a registered trademark of Westex, Inc.
Description
INDURA®
20 cal/cm 2
Flash Jacket is approximately waist length and must be worn in combination with Flash Pants.
Code#
52520 52521 52522 52523 52524 52525 52526
Multi-layer 9oz. INDURA® Ultra Soft with over 7oz. INDURA® Ultra Soft. Thread—NOMEX®/Kevlar.
50 cal/cm 2
100 cal/cm 2
Multi-layer 6.8oz. Southern Mills
Multi-layer 10oz. Southern Mills
TuffWeld® 700 Fabric with inner layer of Q9 Fabric and NOMEX® Caldura® lining. Thread— NOMEX®/Kevlar.
TuffWeld® 1000 Fabric with inner layers of Q9 Fabric and NOMEX® Caldura® lining. Thread— NOMEX®/Kevlar.
Coverall
Jackets
Pants
Jackets
Pants
Jackets
Pants
52771 52772 52773 52774 52775 52776 52777
52679 52680 52681 52682 52683 52684 52697
53679 53680 53681 53682 53683 53684 53685
52690 52691 52692 52693 52694 52695 52696
53690 53691 53692 53693 53694 53695 53696
52749 52750 52751 52752 52753 52754 52755
53749 53750 53751 53752 53753 53754 53755
Clothing Sizes* (All Styles) Typical Protective Clothing Systems Jacket Sizes
Medium Large X Large 2X Large 3X Large 4X Large 5X Large
Normal Size
38" - 40" 42" - 44" 46" - 48" 50" - 52" 54" - 56" 58" - 60" 62" - 64"
Bib-Overall Pants Finish Size
Waist Size
48" 52" 56" 60" 64" 68" 72"
32" - 34" 36" - 38" 40" - 42" 44" - 46" 48" - 50" 52" - 54" 56" - 58"
*Notes: Because the clothing is worn outside of the user’s street clothes, take into consideration the size and weight of the clothes the user will be wearing (Example: warm winter jackets, etc). Jacket is approximately waist length.
18 17
Hazard Risk Category
0 1 2 3 4
Clothing Description (Number of layers given in parentheses)
Total weight (oz / yd2)
Untreated Cotton (1) FR Shirt and FR Pants (1) Cotton underwear plus FR shirt and FR pants (2) Cotton underwear plus FR shirt and FR pants plus FR coverall (3) Cotton underwear plus FR shirt and FR pants plus double layer switching coat and pants (4)
4.5 4.5 9 16
— — — —
7 8 12 20
ATPV or Egr Rating or PPE cal/cm 2
N/A 5 8 25
24 — 30
40
*ATPV is defined in the ASTM P S 58 standard arc test method for flame resistant (FR) fabrics as the incident energy that would just cause the onset of a second degree burn (1.2 cal/cm2). Egr is reported according to ASTM P S58 and is defined as the highest incident energy which did not cause FR fabric breakopen and did not exceed the second-degree burn criteria. Egr is reported when ATPV cannot be measured due to FR fabric breakopen.
If the incident energy level is known, the workerASTM knows F1506, the type F1959, or protective and ANSI Z87.1-989 equipment Standards and tools to wear/use while servicing the equipment.
Arc Protection Clothing and Kits
ARC PROTECTION CLOTHING (FR) AND KITS Arc Protection Kits
Code #52811 20 cal/cm 2 Arc Protection Kit Hazard Risk Category 2*
Code #52800 10 cal/cm 2 Arc Protection Kit Hazard Risk Category 2
Code #52706 50 cal/cm 2 Arc Protection Kit Hazard Risk Category 4
Code #52546 Detachable Hood
Specify parka / coat / jacket and glove sizes when ordering kits. (See Pages 16–17 for gloves.) 52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 1,000V Class 0 Class 0 22100 52540 52599
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 20,000V Class 2 Class 2 22200 52540 52599
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 1,000V Class 0 Class 0 22100 52540 52599
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 20,000V Class 2 Class 2 22200 52540 52599
52800 52804
52801 52804
52802 52805
52803 52805
Anti-Fog Arc Shield Safety Glasses Flame Retardant Lab Coat Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag Flame Retardent Hood Complete Kit Code # Kit Without Gloves Code #
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 1,000V Class 0 Class 0 22100 52540 52599 52546 52806 52808
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 20,000V Class 2 Class 2 22200 52540 52599 52546 52807 52808
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 1,000V Class 0 Class 0 22100 52540 52599 52545 52820 52824
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 20,000V Class 2 Class 2 22200 52540 52599 52545 52822 52824
Anti-Fog Arc Shield Safety Glasses Flame Retardant Coverall Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag Flame Retardent Hood Complete Kit Code # Kit Without Gloves Code #
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 1,000V Class 0 Class 0 22100 52540 52599 52546 52830 52834
52511 (10 cal/cm 2) 52542 11 cal/cm 2 Ultra Soft INDURA® 20,000V Class 2 Class 2 22200 52540 52599 52546 52832 52834
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 1,000V Class 0 Class 0 22100 52540 52599 52545 52836 52840
52511 (10 cal/cm 2) 52542 5.6 cal/cm 2 NOMEX® 20,000V Class 2 Class 2 22200 52540 52599 52545 52838 52840
Electrical Arc Hood Safety Glasses Flash Jacket & Pants Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag
52515 (20 cal/cm 2) 52542 20 cal/cm 2 Coat Only 1,000V Class 0 Class 0 22100 52540 52599
52515 (20 cal/cm 2) 52542 20 cal/cm 2 Coat Only 20,000V Class 2 Class 2 22200 52540 52599
52685 (31 cal/cm 2) 52542 31 cal/cm 2 Jacket & Pants 1000V Class 0 Class 0 22100 52540 52599
52685 (31 cal/cm 2) 52542 31 cal/cm 2 Jacket & Pants 20,000V Class 2 Class 2 22200 52540 52599
52810 52814
52811 52814
52701 52702
52703 52702
52687 (50 cal/cm 2) 52542 50 cal/cm 2 1000V Class 0 Class 0 22100 52540 52599
52687 (50 cal/cm 2) 52542 50 cal/cm 2 20,000V Class 2 Class 2 22200 52540 52599
52689 (100 cal/cm 2) 52542 100 cal/cm 2 1000V Class 0 Class 0 22100 52540 52599
52689 (100 cal/cm 2) 52542 100 cal/cm 2 20,000V Class 2 Class 2 22200 52540 52599
52705 52707
52706 52707
52709 52711
52710 52711
Anti-Fog Arc Shield Safety Glasses Flame Retardant Parka Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag Complete Kit Code # Kit Without Gloves Code #
Complete Kit Code # Kit Without Gloves Code # Electrical Arc Hood Safety Glasses Flash Jacket & Pants Insulating Gloves Appropriate Glove Protectors Glove Bag Safety Helmet Flash Apparel Bag Complete Kit Code # Kit Without Gloves Code #
If the incident energy level is known, the worker knows the type or protective equipment and tools to wear/use while servicing the equipment.
19 18
Safety Tools & Products Safety Tools to 1000 VAC Insulation Products to 40,000 VAC
Electro Safe
®
12102 Conway Road • Beltsville, MD 20705 Tel: (800) 443-1196 • (301) 210-0215 • Fax: (301) 210-0217 E-mail [email protected] • www.insulatedtools.com
Certified Insulated Products
Certified Insulated Products
