4BP 4â LED Module
Catalog Number Notes
FEATURES & SPECIFICATIONS INTENDED USE — Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Compliant friction clip retention allows fitment into nearly 100% of installed cans. The LED module maintains at least 70% light output for 50,000 hours.
Type
LED Recessed Downlighting
CONSTRUCTION — Aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.
4BP 4” LED Module
OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 Lamp. Wide flood beam angle at > 45°. Utilizes 3000 K color temperature LEDs. CRI - 83. ELECTRICAL — Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart. P Series' patent pending driver has zero inrush which allows power loads to be calculated with actual rated wattages.
IC/Non-IC Retrofit
Example: 56 units of 4BPMW LED fixtures can be installed in line with a 600-watt dimmer. 600w/10.6w = 56.6 fixtures. Standard input wattage is 10.6 watts, 58.5 lumens per watt; equivalent to 65-watt incandescent. *Actual wattage may differ by +/-5% when operating at 120V +/-10%. INSTALLATION — Suitable for installation in standard and shallow-height rough-in sections. E26 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance.
D I
LE
MAB M
Friction clips allow fitment into cans with an inside diameter of 4.0” to 4.5". LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® certified; California T24 compliant. Wet location listed for indoor use only. WSEC ASTM E283 for Air-Tight (with IC housings). WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Specifications subject to change without notice. PATENTS PENDING.
5-1/4 (13.3)
Specifications Aperture: 4 (10.2) Ceiling opening: as rough-in: 4-3/8 (11.11) Overlap trim: 5-1/4 (13.33) Height: 3-7/16 (8.7)
3-7/16 (8.7)
E26 adaptor (included)
3-3/4 (9.5) 4 (10.2)
Splice kit (included)
All dimensions are inches (centimeters) unless otherwise indicated.
ORDERING INFORMATION
Example: 4BPMW LED L3LED T24
For shortest lead times, configure product using standard options (shown in bold).
4BPMW
LED
Series/Finish
Lamp/Lumens1
Color temperature
Voltage
LED
(blank)
(blank)
4BP
4" Baffle LED module
MW
Matte white
10.6W, 620 lumens
3000 K
Options 120V
L3LED T24 L3RLED T24 L3 L3R
IC/Non-IC rated, new construction rough-in LED base2 IC/Non-IC rated, remodel rough-in LED base2 IC/Non-IC rated, new construction rough-in3 IC/Non-IC rated, remodel rough-in3
Notes 1 Total system delivered lumens. 2 LED module ships less E26 adaptor and hardwire kit. 3 Must be ordered on a separate line.
DOWNLIGHTING
4BP LED
4” LED Module PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization
Illuminance Data at 30” Above Floor for a Single Luminaire
4BPMW LED, 3000 K LEDs, input watts: 11.16, delivered lumens: 625, LM/W= 56, test no. LTL 23665, tested in accordance with IESNA LM 79-08
60° 200
40° 0°
0 5 15 25 35 45 55 65 75 85 90
Zone Lumens % Lamp 0° - 30° 273.5 43.7 0° - 40° 430.0 68.8 0° - 60° 575.4 92.0 0° - 90° 625.2 100.0 90° - 180° 0.0 0.0 0° - 180° 625.2 *100.0 *Efficiency
pf pc pw 0 1 2 3 4 5 6 7 8 9 10
RCR
80°
Ave Lumens 363 360 34 341 96 311 143 254 157 129 100 49 45 31 30 14 16 3 4 0
80% 50% 30% 10% 119 119 119 108 104 101 97 92 87 88 82 76 80 73 67 73 66 60 67 59 54 62 54 49 57 50 45 53 46 41 49 42 38
20% 70% 50% 30% 10% 116 116 116 106 103 100 95 91 86 87 81 76 79 72 67 72 65 60 66 59 54 61 54 49 56 49 44 52 45 41 49 42 37
50% 50% 30% 10% 111 111 111 101 99 97 92 88 84 84 79 74 76 71 66 70 64 59 65 58 53 60 53 48 55 49 44 51 45 41 48 42 37
50% beam 10% beam 61.3° 92.7° Inital FC Mounting Center Height Beam Diameter FC Diameter FC 1.2 11.5 6.0 6.5 12.0 8.0 0.6 15.7 3.2 8.9 6.5 10.0 0.4 19.9 2.0 11.2 4.0 12.0 0.3 24.1 1.4 13.6 2.7 14.0 0.2 28.3 1.0 16.0 2.0 16.0
20°
ADDITIONAL DATA ENERGY DATA* Lumens
620
Min. starting temp
-18°C (0°F)
EMI/RFI
FCC Title 47 CFR, Part 15, Class B
Sound rating
Class A standards
Input voltage
120V
Min. power factor
0.80
Input frequency
50/60 Hz
Rated wattage
10.6
Input power
10.6
Input current .09A *Values at non-dimming line voltage.
DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com
4BP LED
© 2013-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/28/14
FEATURES & SPECIFICATIONS INTENDED USE — Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Compliant friction clip retention allows fitment into nearly 100% of installed cans. The LED module maintains at least 70% light output for 50,000 hours.
Type
LED Recessed Downlighting
CONSTRUCTION — Aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.
4BP 4” LED Module
OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 Lamp. Wide flood beam angle at > 45°. Utilizes 3000 K color temperature LEDs. CRI - 83. ELECTRICAL — Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart. P Series' patent pending driver has zero inrush which allows power loads to be calculated with actual rated wattages.
IC/Non-IC Retrofit
Example: 56 units of 4BPMW LED fixtures can be installed in line with a 600-watt dimmer. 600w/10.6w = 56.6 fixtures. Standard input wattage is 10.6 watts, 58.5 lumens per watt; equivalent to 65-watt incandescent. *Actual wattage may differ by +/-5% when operating at 120V +/-10%. INSTALLATION — Suitable for installation in standard and shallow-height rough-in sections. E26 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance.
D I
LE
MAB M
Friction clips allow fitment into cans with an inside diameter of 4.0” to 4.5". LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® certified; California T24 compliant. Wet location listed for indoor use only. WSEC ASTM E283 for Air-Tight (with IC housings). WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Specifications subject to change without notice. PATENTS PENDING.
5-1/4 (13.3)
Specifications Aperture: 4 (10.2) Ceiling opening: as rough-in: 4-3/8 (11.11) Overlap trim: 5-1/4 (13.33) Height: 3-7/16 (8.7)
3-7/16 (8.7)
E26 adaptor (included)
3-3/4 (9.5) 4 (10.2)
Splice kit (included)
All dimensions are inches (centimeters) unless otherwise indicated.
ORDERING INFORMATION
Example: 4BPMW LED L3LED T24
For shortest lead times, configure product using standard options (shown in bold).
4BPMW
LED
Series/Finish
Lamp/Lumens1
Color temperature
Voltage
LED
(blank)
(blank)
4BP
4" Baffle LED module
MW
Matte white
10.6W, 620 lumens
3000 K
Options 120V
L3LED T24 L3RLED T24 L3 L3R
IC/Non-IC rated, new construction rough-in LED base2 IC/Non-IC rated, remodel rough-in LED base2 IC/Non-IC rated, new construction rough-in3 IC/Non-IC rated, remodel rough-in3
Notes 1 Total system delivered lumens. 2 LED module ships less E26 adaptor and hardwire kit. 3 Must be ordered on a separate line.
DOWNLIGHTING
4BP LED
4” LED Module PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization
Illuminance Data at 30” Above Floor for a Single Luminaire
4BPMW LED, 3000 K LEDs, input watts: 11.16, delivered lumens: 625, LM/W= 56, test no. LTL 23665, tested in accordance with IESNA LM 79-08
60° 200
40° 0°
0 5 15 25 35 45 55 65 75 85 90
Zone Lumens % Lamp 0° - 30° 273.5 43.7 0° - 40° 430.0 68.8 0° - 60° 575.4 92.0 0° - 90° 625.2 100.0 90° - 180° 0.0 0.0 0° - 180° 625.2 *100.0 *Efficiency
pf pc pw 0 1 2 3 4 5 6 7 8 9 10
RCR
80°
Ave Lumens 363 360 34 341 96 311 143 254 157 129 100 49 45 31 30 14 16 3 4 0
80% 50% 30% 10% 119 119 119 108 104 101 97 92 87 88 82 76 80 73 67 73 66 60 67 59 54 62 54 49 57 50 45 53 46 41 49 42 38
20% 70% 50% 30% 10% 116 116 116 106 103 100 95 91 86 87 81 76 79 72 67 72 65 60 66 59 54 61 54 49 56 49 44 52 45 41 49 42 37
50% 50% 30% 10% 111 111 111 101 99 97 92 88 84 84 79 74 76 71 66 70 64 59 65 58 53 60 53 48 55 49 44 51 45 41 48 42 37
50% beam 10% beam 61.3° 92.7° Inital FC Mounting Center Height Beam Diameter FC Diameter FC 1.2 11.5 6.0 6.5 12.0 8.0 0.6 15.7 3.2 8.9 6.5 10.0 0.4 19.9 2.0 11.2 4.0 12.0 0.3 24.1 1.4 13.6 2.7 14.0 0.2 28.3 1.0 16.0 2.0 16.0
20°
ADDITIONAL DATA ENERGY DATA* Lumens
620
Min. starting temp
-18°C (0°F)
EMI/RFI
FCC Title 47 CFR, Part 15, Class B
Sound rating
Class A standards
Input voltage
120V
Min. power factor
0.80
Input frequency
50/60 Hz
Rated wattage
10.6
Input power
10.6
Input current .09A *Values at non-dimming line voltage.
DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com
4BP LED
© 2013-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/28/14
