PRODUCT DESCRIPTION Energy efficient LED retrofit module fits into Juno IC23-LEDT24 and IC23R-LEDT24 recessed housings • Performance is equivalent to a 65W incandescent lamp while consuming less than 13W • Dimmable with most standard incandescent dimmers and electronic low voltage dimmers • LED retrofit module is designed to provide 35,000 hours of life • 3 year warranty
PRODUCT SPECIFICATIONS LED Retrofit Module All-in-one design where LED light engine mounts directly to trim for ease of installation into dedicated IC23-LEDT24 and IC23R-LEDT24 recessed housings. LED Light Engine LEDs and driver are mounted directly to upper housing with finned aluminum heat sink designed to provide superior thermal management and ensure long life • 3000K LED color temperature • 80 CRI typical • 120 volts AC at 60Hz.
DIMENSIONS 4 7/16"
LED Driver Accommodates 120 volts AC at 60Hz • Driver is dimmable with most standard incandescent dimmers • For best results, electronic low voltage dimmers are recommended. Electrical Connections Features non-screw base disconnect for quick installation with Juno IC23-LEDT24 and IC23R-LEDT24 housings. Trim Die-cast aluminum splay trim with white finish • Diffusing lens conceals the LEDs from direct view and provides uniform aperture luminance. Life Rated for 35,000 hours at 70% lumen maintenance. Labels Energy Star qualified • UL and cUL classified for use with Juno IC23-LEDT24 and IC23R-LEDT24 • Certified to high efficacy requirements of California T24-2008 • Suitable for damp locations. Testing All reports are based on published industry procedures; field performance may differ from laboratory performance. Product specifications subject to change without notice.
INSTALLATION The LED retrofit module is provided with torsion springs as standard. COMPATIBLE HOUSINGS The module will fit into recessed housings measuring at least 6-3/4” high and with an inside diameter between 6” and 6-3/4”. The V6RL-T24 LED retrofit module features a quick connect plug that works with 6" Juno housings with the mating connector: IC23-LEDT24 and IC23R-LEDT24.
4 3/4" 9/16" (TO LENS)
5 7/8" APERTURE 7 5/8"
PERFORMANCE DATA Input Voltage Input Power Frequency EMI/RFI
120V 12.9W 60Hz FCC Title 47, Part 15
Minimum starting temp Lumens CRI LED CCT LPW
Class B (consumer) -30°C (-22°F) 587 Typical 80 3000K 45
PRODUCT CODES
REV-4/11
Catalog Number
Description
V6RL3K-WH-T24
6” LED module, 3000K
N1.5.1
6” LED RETROFIT MODULE DOWNLIGHT MODULE
V6RL3K-WH-T24 DIMMER COMPATIBILITY Dimmable with most standard incandescent dimmers. For best results, electronic low voltage dimmers are recommended. Dimming range depends on dimmer model with one fixture load minimum to maximum rated load for dimmer. Compatible dimmers include but are not limited to the following Juno qualified dimmers: INCANDESCENT AND MAGNETIC LOW VOLTAGE DIMMERS
ELECTRONIC LOW VOLTAGE DIMMERS
Lutron Model Numbers: Glyder® GLV Series Diva® D/DV/DVLV Series Ariadni® AY Series* Skylark® S/SLV Series TG Series Ceana® CNLV Series*
Lutron® Model Numbers: Nova T ® NTELV Series* Skylark® SELV Series* Diva® DVELV Series Maestro® MAELV Series* Faedra® FAELV Series* Spacer System® SPSELV Series*
®
Leviton Model Numbers: Illumatech® IP106 Series ®
Leviton® Model Numbers: Illumatech® IPE104 Series (Dimmer has manual trim adjustment for low end of dimming range to achieve 5% dimming)
*Juno recommended dimmers
WHOLE HOUSE INTEGRATED CONTROL SYSTEMS Schneider Electric C-Bus