astarte verde
ASTARTE VERDE SUPER ACRYLIC POLYMER MODIFIED ADHESIVE FOR TILES‐GRANITES‐MARBLES (C2TE)
Description :
High quality white adhesive, based on high strength white Portland cement (I 52.5), polymers and top quality raw materials.
Usages :
It is used in highly demanding tile‐fixing, of any kind of tiles, with reduced (porcelanato) or zero absorbance, granite tiles, marble or decorative stone tiles, on any substrate, on walls or floors, indoors or outdoors, with no of the tiles slip on the walls and extended open‐time, offering high resistance to damp and frost and providing extra‐high initial and final bond strength.
Advantages:
High adhesion strength. ▪ No slip of the tiles during application on vertical surfaces. ▪ Resistance to temperature fluctuations and moisture ▪ Easy to use.
Packaging :
In bags of 25 kg In pallet of 1.350 kg, 54 bags
Storage:
In intact packaging and dry environment, 12 months from the production date
Safety precautions :
This product contains cement and reacts as alkaline with moisture, so it is classified as irritant. It must be used with care according to the instructions for use. In order to avoid any injuries due to alkalis of the cement, wear gloves, protective glasses and avoid breathing the dust. Please consult the SDS of the product.
Specifications :
ΕΝ 12004 (C2TE)
Issue: 18/10/2017 Page 1 of 3 HEAD OFFICE: 364 KIFISSIAS AV., 15233 CHALANDRI /ATHENS / GREECE, ΤEL: +302106896480, FACTORY: TEL: +302295022225, FAX: +302295022120 www.marmoline.gr ‐ [email protected]
TECHNICAL DATA:
Colour:
White
Adhesion strength:
Average values based on production control laboratory tests:
On concrete after 28 days: After heating at 70°C: In water: After 25 cycles of freezing ‐ thawing: Slip:
1.0 N/mm2 (EN 1348) 1.0 N/mm2 (EN 1348) 1.0 N/mm2 (EN 1348) 1.0 N/mm2 (EN 1348) 1.0 N/mm2 Tensile adhesion strength after heat ageing: > 1.0 N/mm2 Tensile adhesion strength after water immersion: > 1.0 N/mm2 Tensile adhesion strength after freeze/thaw cycles: > 1.0 N/mm2
APPLICATION: Mixing ratio:
7 lt of water / 25 Kg of powder
Consumption:
2 – 4 kg per m² depending on the size and type of the tiles
Issue: 18/10/2017 Page 2 of 3 HEAD OFFICE: 364 KIFISSIAS AV., 15233 CHALANDRI /ATHENS / GREECE, ΤEL: +302106896480, FACTORY: TEL: +302295022225, FAX: +302295022120 www.marmoline.gr ‐ [email protected]
Application mode:
Check that the substrate is clean, dry and free from loose particles and other materials.
If the substrate is unstable or crumbles, priming of the surface with special primer is recommended.
Using an electric drill at slow speed, mix well a 25 kg bag with 7 liters (approximately) of clean water.
Leave the mixture for 10 minutes, to mature, and then stir again.
Using an appropriate notched trowel (depending on the substrate and the type of tile) spread the adhesive evenly across the substrate surface.
The applied mixture must be covered with tiles within 20‐25 minutes from the spreading of the adhesive and before a crust (film) appears on the surface.
Apply the tiles by pressing gently.
Υou can walk on the tiles 12 hours after laying and grout after 24 hours ATTENTION:
The content of the bag should be protected from humidity Not recommended for use in extreme weather conditions (frost or heatwave). Application temperature +5oC to +35oC
The above guidelines are indicative, for the correct use of the product. For more technical details please contact the company’s technical department.
We guarantee the quality of all our products, on the basis of their technical specifications, as described in the Declaration of Performance (CE) and this technical data sheet. Such guarantee refers only to the products that we deliver for use and never to its application or final result, which largely depend on the experience and quality of work of each user and on the application conditions. The user is advised to test the product on a small scale, and if he is satisfied with the result, then to use the product on large scale in his project. This edition of technical data sheet automatically cancels any previous version
Issue: 18/10/2017 Page 3 of 3 HEAD OFFICE: 364 KIFISSIAS AV., 15233 CHALANDRI /ATHENS / GREECE, ΤEL: +302106896480, FACTORY: TEL: +302295022225, FAX: +302295022120 www.marmoline.gr ‐ [email protected]
