Ava Elizabeth Collection Instructions - Displays2go

Installation Instructions 1. Hold one of the clear acrylic panels in the desired location on the surface that you wish to attach the panel. With a pencil, trace the holes in the panels onto the surface you are mounting the panels. Mark the center of each circle. 2. Set aside the panel. Using a power drill and a 1/16” bit, drill a pilot hole into the center of each circle you traced from the panel. 3. Then, in each pilot hole, screw in the threaded flange base of the stand-offs. 4. Now you can attach the base of the stand-offs to the threaded flange bases you just attached. 5. Sandwich the Ava Elisabeth graphic between the two clear acrylic panels, making sure all the holes are aligned.

Mounting surface

p ca off St an d-

ea r Av acr a E yli c Cl lisa pa ea be ne r a th l cr yli Gra c p ph an ic el

Cl

se ba off St an d-

Sc re w

St an d-

off

th

re a

de

d

fla

ng

e

6. Using the stand-off caps, secure the panels to the bases of the stand-offs.