B295SR120HP000I Universal Lighting Technologies ... - Depot Lighting
TRIAD® ELECTRONIC BALLASTS
• 2 Lamp Applications
2.40” 3.13”
Mounting Dimensions H M X 1.55” 1.78”
8.89” 11.14”
NOM
Line Input Power Ballast Ballast Current Power Factor Factor Efficacy THD (Amps) (Watts) (PF) (BF) Factor (BEF) %
Min. F/C Start Wiring Temp Diag. Dim.
•
0.92 0.40
110 109
> .98
0.89
0.81 0.82
< 10 -20/-29
4
SL
•
1.11 0.48
134 132
> .98
0.89
0.66 0.67
< 10 -20/-29
4
SL
1.40 1.40 0.61
169 162 160
> .99
0.95
< 10 -20/-29
4
SL
> .99
0.89
< 10 -20/-29
4
SL
•
1.60
180
> .90
1.00
0.56
< 25
4
ST
•
1.60 1.60 0.69
185 176 173
> .99
0.89
< 10 - 20/-29
4
SL
> .99
0.89
0.48 0.48 0.49
< 10 -20/-29
4
SL
1.77 1.77 0.76
208 205 209
> .99
0.88
< 10 - 20/-29
4
SL
> .99
0.88
< 10 -20/-29
4
SL
1.47 1.47 0.63
174 174 171
> .99
0.88
0.51
< 10
60/16
4
SL
> .99
0.88
0.51
< 10
60/16
4
SL
• •
• • • • •
STARTING METHOD LEGEND PAR-IS = Parallel Instant Start PAR-PRS = Parallel Programmed Rapid Start
IS = Instant Start PRS = Programmed Rapid Start RS = Rapid Start
9.50” 11.75”
Certification
0.56 0.55 0.56
0.43 0.43 0.44
50/10
PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start
WIRING DIAGRAMS
1.69” 2.00”
DIAGRAM 4
Page 2-43
FOR MORE INFORMATION CALL
1-800-BALLAST (225-5278)
Fluorescent-Electronic
Lamp Starting Line Catalog Qty. Method Volts Number F48T12HO - Two Lamp Applications 120 2 SER-RS B295SRUNVHP • 277 F60T12HO - Two Lamp Applications 120 2 SER-RS B295SRUNVHP • 277 F72T12HO - Two Lamp Applications 120 B295SR120HP • 2 SER-RS 120 B295SRUNVHPº • 277 F73T12/BL/HO - Two Lamp Applications 2 SER-RS 120 493B2 • F84T12HO - Two Lamp Applications 120 B295SR120HP • 2 SER-RS 120 B295SRUNVHPº • 277 F96T12HO - Two Lamp Applications 120 B295SR120HP • 2 SER-RS 120 B295SRUNVHPº • 277 F96T12HOES - Two Lamp Applications 120 B295SR120HP • 2 SER-RS 120 B295SRUNVHPº • 277 º Preliminary Data
ST SL
T12HO
• Rapid Starting Options
FOR T12 HIGH OUTPUT LAMPS
Overall Dimensions Draw # L W
• High Performance Models
Fluorescent-Electromagnetic
Product Overview Rapid Start Ballasts These ballasts provide smooth starting to Rapid Start lamps — reaching full brightness in about two seconds without the use of starters. They have built-in filament windings that energize the low-voltage cathodes in Rapid Start lamps. Because electrodes are continuously heated, less voltage is required to strike an arc through a Rapid Start lamp than a Slimline one. Ballasts for T12/T10 Applications Universal offers a wide variety of T12 and T10 ballasts to operate 1 - 3 Rapid Start lamps. This lamp/ballast system provides smooth, virtually instant starting without the use of starters (30and 40-watt T12 models and 40-watt T10 models are available). Models for U-lamp applications are also available. UNIVERSAL® PLUS models are available for use where maximum efficiency is required. These "hybrid" type ballasts in corporate an electronic switch which disconnects power to the lamp cathodes after start-up, saving additional energy. Ballasts for T8 Applications Universal's T8 product offering includes models for F17, F25, F32 and F40 type T8 lamps. This product line features our OcTek™ electromagnetic ballast models. These models are low initial cost energy efficient options for use with F32T8, 4 foot Rapid Start lamps. These models are available in several variations, including full, medium, low light output and hybrid versions (OcTek™ Plus). These models maximize energy savings and provide effective choices when retrofitting 4-foot T12 fixtures. Slimline Ballasts Our Slimline models are designed for use with single-pin Slimline lamps. They do not require the use of starters. These ballasts deliver a high starting voltage to the lamps, enabling an arc to strike through the tube without preheating the lamp cathodes (which are specially constructed to withstand the shock).
PAGE 1-2
Rapid Start Ballasts
T12/T10 Applications
T8 Applications
Slimline Ballasts
FOR MORE INFORMATION CALL
1-800-BALLAST (225-5278)
• 2 Lamp Applications
2.40” 3.13”
Mounting Dimensions H M X 1.55” 1.78”
8.89” 11.14”
NOM
Line Input Power Ballast Ballast Current Power Factor Factor Efficacy THD (Amps) (Watts) (PF) (BF) Factor (BEF) %
Min. F/C Start Wiring Temp Diag. Dim.
•
0.92 0.40
110 109
> .98
0.89
0.81 0.82
< 10 -20/-29
4
SL
•
1.11 0.48
134 132
> .98
0.89
0.66 0.67
< 10 -20/-29
4
SL
1.40 1.40 0.61
169 162 160
> .99
0.95
< 10 -20/-29
4
SL
> .99
0.89
< 10 -20/-29
4
SL
•
1.60
180
> .90
1.00
0.56
< 25
4
ST
•
1.60 1.60 0.69
185 176 173
> .99
0.89
< 10 - 20/-29
4
SL
> .99
0.89
0.48 0.48 0.49
< 10 -20/-29
4
SL
1.77 1.77 0.76
208 205 209
> .99
0.88
< 10 - 20/-29
4
SL
> .99
0.88
< 10 -20/-29
4
SL
1.47 1.47 0.63
174 174 171
> .99
0.88
0.51
< 10
60/16
4
SL
> .99
0.88
0.51
< 10
60/16
4
SL
• •
• • • • •
STARTING METHOD LEGEND PAR-IS = Parallel Instant Start PAR-PRS = Parallel Programmed Rapid Start
IS = Instant Start PRS = Programmed Rapid Start RS = Rapid Start
9.50” 11.75”
Certification
0.56 0.55 0.56
0.43 0.43 0.44
50/10
PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start
WIRING DIAGRAMS
1.69” 2.00”
DIAGRAM 4
Page 2-43
FOR MORE INFORMATION CALL
1-800-BALLAST (225-5278)
Fluorescent-Electronic
Lamp Starting Line Catalog Qty. Method Volts Number F48T12HO - Two Lamp Applications 120 2 SER-RS B295SRUNVHP • 277 F60T12HO - Two Lamp Applications 120 2 SER-RS B295SRUNVHP • 277 F72T12HO - Two Lamp Applications 120 B295SR120HP • 2 SER-RS 120 B295SRUNVHPº • 277 F73T12/BL/HO - Two Lamp Applications 2 SER-RS 120 493B2 • F84T12HO - Two Lamp Applications 120 B295SR120HP • 2 SER-RS 120 B295SRUNVHPº • 277 F96T12HO - Two Lamp Applications 120 B295SR120HP • 2 SER-RS 120 B295SRUNVHPº • 277 F96T12HOES - Two Lamp Applications 120 B295SR120HP • 2 SER-RS 120 B295SRUNVHPº • 277 º Preliminary Data
ST SL
T12HO
• Rapid Starting Options
FOR T12 HIGH OUTPUT LAMPS
Overall Dimensions Draw # L W
• High Performance Models
Fluorescent-Electromagnetic
Product Overview Rapid Start Ballasts These ballasts provide smooth starting to Rapid Start lamps — reaching full brightness in about two seconds without the use of starters. They have built-in filament windings that energize the low-voltage cathodes in Rapid Start lamps. Because electrodes are continuously heated, less voltage is required to strike an arc through a Rapid Start lamp than a Slimline one. Ballasts for T12/T10 Applications Universal offers a wide variety of T12 and T10 ballasts to operate 1 - 3 Rapid Start lamps. This lamp/ballast system provides smooth, virtually instant starting without the use of starters (30and 40-watt T12 models and 40-watt T10 models are available). Models for U-lamp applications are also available. UNIVERSAL® PLUS models are available for use where maximum efficiency is required. These "hybrid" type ballasts in corporate an electronic switch which disconnects power to the lamp cathodes after start-up, saving additional energy. Ballasts for T8 Applications Universal's T8 product offering includes models for F17, F25, F32 and F40 type T8 lamps. This product line features our OcTek™ electromagnetic ballast models. These models are low initial cost energy efficient options for use with F32T8, 4 foot Rapid Start lamps. These models are available in several variations, including full, medium, low light output and hybrid versions (OcTek™ Plus). These models maximize energy savings and provide effective choices when retrofitting 4-foot T12 fixtures. Slimline Ballasts Our Slimline models are designed for use with single-pin Slimline lamps. They do not require the use of starters. These ballasts deliver a high starting voltage to the lamps, enabling an arc to strike through the tube without preheating the lamp cathodes (which are specially constructed to withstand the shock).
PAGE 1-2
Rapid Start Ballasts
T12/T10 Applications
T8 Applications
Slimline Ballasts
FOR MORE INFORMATION CALL
1-800-BALLAST (225-5278)
