Bandit Bid Specifications - Model 2400
SPECIFICATIONS BANDIT MODEL 2400 (24" DISC STYLE) TOWABLE WHOLE TREE CHIPPER
SPECIFICATION Capacity: 24"
Measurements
Throat Opening: 24" high x 29" wide Feed Rate: 135 FPM Noise Level: 80 decibels @ 50', 360 degrees around
Dimensions
Length: 27' 6" w/ cab - 32' w/ loader - 32' w/ cab and loader - 32' Width: 10' 10" (approximate) w/ cab - 11' 3" w/ loader - 11' 3" w/ cab and loader - 11' 3" Height: 11' 7" w/ cab - 12' w/ loader - 12' w/ cab and loader - 12'
Weight: 55,000lbs w/ cab - 64,000lbs w/ loader 64,000lbs w/ cab and loader - 73,000lbs Options: 765 HP tier 2 diesel engine
Engine
Clutch: Manual or Hydraulic fluid clutch options are available Mount: (2) adjustable mounts are provided to secure belt tension Drive: (2) 5/8VF2500 banded Kevlar drive belt Auto Feed: Standard
Optional Loader
Loader Style: Heavy-duty knuckle boom loader with turntable bearing Curbside Swing: 50 degrees Roadside Swing: 85 degrees Lifting Capacity @ Full Reach: 3,500 pounds
Lifting Capacity @ 6': 7,200 pounds Reach From End of Infeed 232" (W/O Conveyor): Reach From End of Infeed (W/ 191" Conveyor): Pulling Power: 7,770 pounds Grapple Design: Double Cylinder Grapple Rotator: 4535 Rotobec grapple rotator (6 ton capacity) Jaws Open To: 35" Total Grapple Rotation: 360 degrees Total Loader Rotation: 130 degrees
Optional Cab Cab Dimension: 64 1/2" tall x 46 1/2" wide x 60 1/4" long Cab Features: Insulated cab with ceiling mounted air conditioning / heating system, lockable rear door, windshield wiper, and defroster fan Cab Gauges / Controls: Auto feed tach, fuel sight gauge, GEM 2610 display panel with pre-programmed engine software, engine warning lights, engine throttle control, and engine key switch Seat: Deluxe swivel seat with hydraulic or electronic joystick controls built into the arm rests (Customer to specify controls, Note: electronic joysticks will allow for easier control of loader functions and reduce the number of hydraulic components) Controls: Controls in the operator's cab include: track drive functions, discharge control functions, and feed system control functions Windows: 40 sqaure feet of window space constructed of scratch resistant 3/8" lexan. Lights: (4) work lights are provided on the front of the cab for enhanced operator viewing in darker conditions
Chassis Frame: 1/2" x 6" x 10" tubular steel frame Suspension: (3) 25,000 pound air brake axles Tires: (12) 11r/22.5 Tires & Steel Wheels are standard Fenders: Tandem axle 1/4" steel fenders Hitch: 3" pintle hitch with safety chains and slip hooks Tongue Jack: (2) Dual front hydraulic stabilizers Grapple Barrel: Standard
Remote Option Functions: Tether remote control will contol feed system and discharge functions along with engine throttle and e-stop. (Note: wireless radio remote is available as an option)
Electrical Battery: 24 volt system equipped with (2) 1,400CCA batteries
Feed System Type: Slide box feed system allows top feed wheels to move straight up and down with the flow and diameter of material. This system is to provide direct down pressure on material as it enters the feed system Yoke Slides: 3/8" thick steel and come with (4) 1 x 1 x 29-1/2" replaceable "Ryertex" plastic wear strips to eliminate wear of steel plates Feed Rollers: (2) horizontal top feed wheels, (1) bottom horizontal feed wheel, and (2) vertical side feed wheels Top Feed Roller Dimensions: 28" wide x 15 3/4" diameter top feed wheel, along with a 28" wide diameter x 10 5/8" diameter climber feed wheel Side Feed Roller Dimensions: (2) 31 1/2" tall x 8" diameter vertical side feed wheels are proviced to assist with folding limby material into the chipper
Bottom Feed Roller (1) 28" wide x 10 5/8" diameter bottom feed wheel Dimensions: Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Sharpened Scraper Bar: Mounted behind bottom feed wheel to reduce wrapping Feed Wheel Shafts: Top feedwheel and bottom both use 3". Climber and side feedwheels use 2-7/16" diameter Feed Wheel Drive: Feed wheels are chain driven systems, using (#100 chain) along with hydraulic motors Displacement: Top feed wheels are driven by (2) hydraulic motors, bottom feed wheel is driven by (1) hydraulic motor, and each vertical side feed wheel is driven by (1) hydraulic motor each Bottom feedwheel is driven by (2) hydraulic motors also Hydraulic Down Pressure: Approximately 3,800 pounds of down pressure is featured on the two top feed wheels Attachment: Tapered fit coupling system Infeed Conveyor: An optional 5 1/2' infeed conveyor is available as an option to assist in loading piles of brush or shorter pieces
Cutting System Style: Disc Style Dimensions: 75" diameter x 5" thick RPM'S: 600 (approximate) Knife Pockets: (3) knife pockets Knives: (3) 1/2" x 5" x 23" babbitted knives, along with (3) 3/8" x 2 7/8" x 23" counter knives. Knives and counter knives are held in place using a knife holder / clamp system. Knives can be adjusted for specific chip dimension ranging from 3/4-1" Thrower: (3) boxed throwers are mounted on back of disc and capture chips and throw them at a tremendous velocity, fully loading chip vans Anvil: 1" thick X 10" wide X 23-3/4" long Anvil Adjustment: (2) 5/8" adjuster bolts allow easy adjustment for proper clearance to chipper knives Chipper Shaft: 7" diameter chipper shaft with tapered bushing Chipper Bearings: (2) 4 15/16" bore, 4-bolt Pillow Block, greasable and easily replaceable bearings Chipper Hood: Must be constructed of 3/8" steel and fold back for easy access to disc. Hood is secured with (1) 1" diameter (lockable) pin
Construction Chipper Base (right): 1 1/2" Chipper Base (left): 1 1/2" Belly Band: 1/2" Right Throat Side: 1" Left Throat Side: 3/4" Chipper Hood: 3/8"
Hydraulic System Type: Open Center Filtration: 10 Micron return, 100 micron suction Pump: Gear Style Hydraulic Hoses: 1/4" thru 1" double braid
Discharge Style: 220 degree hydraulic swivel dischare with clean-out door and hydraulic chip deflector
Fuel Tank Capacity: 340 gallon (lockable) steel fuel tank with sight gauge and magnetic drain plug
Hydraulic Tank Capacity: 200 gallon (lockable) hydraulic tank with mesh screen strainer on suction line, cannister style filter, magnetic drain plug, and sight gauge
Paint Paint: CHOOSE FROM: Bandit Yellow, Alert Orange, Caterpillar Yellow, White, Green, Black
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
SPECIFICATION Capacity: 24"
Measurements
Throat Opening: 24" high x 29" wide Feed Rate: 135 FPM Noise Level: 80 decibels @ 50', 360 degrees around
Dimensions
Length: 27' 6" w/ cab - 32' w/ loader - 32' w/ cab and loader - 32' Width: 10' 10" (approximate) w/ cab - 11' 3" w/ loader - 11' 3" w/ cab and loader - 11' 3" Height: 11' 7" w/ cab - 12' w/ loader - 12' w/ cab and loader - 12'
Weight: 55,000lbs w/ cab - 64,000lbs w/ loader 64,000lbs w/ cab and loader - 73,000lbs Options: 765 HP tier 2 diesel engine
Engine
Clutch: Manual or Hydraulic fluid clutch options are available Mount: (2) adjustable mounts are provided to secure belt tension Drive: (2) 5/8VF2500 banded Kevlar drive belt Auto Feed: Standard
Optional Loader
Loader Style: Heavy-duty knuckle boom loader with turntable bearing Curbside Swing: 50 degrees Roadside Swing: 85 degrees Lifting Capacity @ Full Reach: 3,500 pounds
Lifting Capacity @ 6': 7,200 pounds Reach From End of Infeed 232" (W/O Conveyor): Reach From End of Infeed (W/ 191" Conveyor): Pulling Power: 7,770 pounds Grapple Design: Double Cylinder Grapple Rotator: 4535 Rotobec grapple rotator (6 ton capacity) Jaws Open To: 35" Total Grapple Rotation: 360 degrees Total Loader Rotation: 130 degrees
Optional Cab Cab Dimension: 64 1/2" tall x 46 1/2" wide x 60 1/4" long Cab Features: Insulated cab with ceiling mounted air conditioning / heating system, lockable rear door, windshield wiper, and defroster fan Cab Gauges / Controls: Auto feed tach, fuel sight gauge, GEM 2610 display panel with pre-programmed engine software, engine warning lights, engine throttle control, and engine key switch Seat: Deluxe swivel seat with hydraulic or electronic joystick controls built into the arm rests (Customer to specify controls, Note: electronic joysticks will allow for easier control of loader functions and reduce the number of hydraulic components) Controls: Controls in the operator's cab include: track drive functions, discharge control functions, and feed system control functions Windows: 40 sqaure feet of window space constructed of scratch resistant 3/8" lexan. Lights: (4) work lights are provided on the front of the cab for enhanced operator viewing in darker conditions
Chassis Frame: 1/2" x 6" x 10" tubular steel frame Suspension: (3) 25,000 pound air brake axles Tires: (12) 11r/22.5 Tires & Steel Wheels are standard Fenders: Tandem axle 1/4" steel fenders Hitch: 3" pintle hitch with safety chains and slip hooks Tongue Jack: (2) Dual front hydraulic stabilizers Grapple Barrel: Standard
Remote Option Functions: Tether remote control will contol feed system and discharge functions along with engine throttle and e-stop. (Note: wireless radio remote is available as an option)
Electrical Battery: 24 volt system equipped with (2) 1,400CCA batteries
Feed System Type: Slide box feed system allows top feed wheels to move straight up and down with the flow and diameter of material. This system is to provide direct down pressure on material as it enters the feed system Yoke Slides: 3/8" thick steel and come with (4) 1 x 1 x 29-1/2" replaceable "Ryertex" plastic wear strips to eliminate wear of steel plates Feed Rollers: (2) horizontal top feed wheels, (1) bottom horizontal feed wheel, and (2) vertical side feed wheels Top Feed Roller Dimensions: 28" wide x 15 3/4" diameter top feed wheel, along with a 28" wide diameter x 10 5/8" diameter climber feed wheel Side Feed Roller Dimensions: (2) 31 1/2" tall x 8" diameter vertical side feed wheels are proviced to assist with folding limby material into the chipper
Bottom Feed Roller (1) 28" wide x 10 5/8" diameter bottom feed wheel Dimensions: Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Sharpened Scraper Bar: Mounted behind bottom feed wheel to reduce wrapping Feed Wheel Shafts: Top feedwheel and bottom both use 3". Climber and side feedwheels use 2-7/16" diameter Feed Wheel Drive: Feed wheels are chain driven systems, using (#100 chain) along with hydraulic motors Displacement: Top feed wheels are driven by (2) hydraulic motors, bottom feed wheel is driven by (1) hydraulic motor, and each vertical side feed wheel is driven by (1) hydraulic motor each Bottom feedwheel is driven by (2) hydraulic motors also Hydraulic Down Pressure: Approximately 3,800 pounds of down pressure is featured on the two top feed wheels Attachment: Tapered fit coupling system Infeed Conveyor: An optional 5 1/2' infeed conveyor is available as an option to assist in loading piles of brush or shorter pieces
Cutting System Style: Disc Style Dimensions: 75" diameter x 5" thick RPM'S: 600 (approximate) Knife Pockets: (3) knife pockets Knives: (3) 1/2" x 5" x 23" babbitted knives, along with (3) 3/8" x 2 7/8" x 23" counter knives. Knives and counter knives are held in place using a knife holder / clamp system. Knives can be adjusted for specific chip dimension ranging from 3/4-1" Thrower: (3) boxed throwers are mounted on back of disc and capture chips and throw them at a tremendous velocity, fully loading chip vans Anvil: 1" thick X 10" wide X 23-3/4" long Anvil Adjustment: (2) 5/8" adjuster bolts allow easy adjustment for proper clearance to chipper knives Chipper Shaft: 7" diameter chipper shaft with tapered bushing Chipper Bearings: (2) 4 15/16" bore, 4-bolt Pillow Block, greasable and easily replaceable bearings Chipper Hood: Must be constructed of 3/8" steel and fold back for easy access to disc. Hood is secured with (1) 1" diameter (lockable) pin
Construction Chipper Base (right): 1 1/2" Chipper Base (left): 1 1/2" Belly Band: 1/2" Right Throat Side: 1" Left Throat Side: 3/4" Chipper Hood: 3/8"
Hydraulic System Type: Open Center Filtration: 10 Micron return, 100 micron suction Pump: Gear Style Hydraulic Hoses: 1/4" thru 1" double braid
Discharge Style: 220 degree hydraulic swivel dischare with clean-out door and hydraulic chip deflector
Fuel Tank Capacity: 340 gallon (lockable) steel fuel tank with sight gauge and magnetic drain plug
Hydraulic Tank Capacity: 200 gallon (lockable) hydraulic tank with mesh screen strainer on suction line, cannister style filter, magnetic drain plug, and sight gauge
Paint Paint: CHOOSE FROM: Bandit Yellow, Alert Orange, Caterpillar Yellow, White, Green, Black
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
