Bandit Bid Specifications - Model 3590
SPECIFICATIONS BANDIT MODEL 3590 (30" DRUM STYLE) TOWABLE WHOLE TREE CHIPPER
SPECIFICATION Capacity: 30"
Measurements
Throat Opening: 30" high x 48" wide Feed Rate: 120 FPM with a 5/8" chip Noise Level: 80 decibels at 50' (360 degrees around) Length: 42'
Dimensions
Width: 11' 5" Height: 12' 4" Weight: 64,000 pounds (approximate) Tongue Weight: 15,500 pounds (approximate)
Engine
Options: 765 HP tier 2, 800 HP tier 2, 875 HP tier 2, 1050 HP tier 2 diesel engines Clutch: Twin Disc Spread Bearing Mount: (2) adjustable mounts are provided to secure belt tension Drive: (3) banded 5V/5VX Kevlar belts Auto Feed: Standard
Chassis
Frame: Mainframe is made from 1/2" X 6" X 10" rectangular tubing Suspension: Tandem 25,000 pound axles Brakes: Air Tires: (8) 11R x 22.5 tires mounted on dual rims Fenders: 1/4" tandem axle steel fenders Hitch: Fifth wheel pintle hitch Tongue Jack: (2) hydraulically operated front stabilizers
Remote Option
Functions: Tether remote with 30' cord (controls feed wheel forward/reverse, yoke up/down, discharge deflector left/right and up/down, throttle, and engine e-stop).
Electrical
Battery: (2) 1,400 CCA batteries Electrical Plug: Sure flex 12' long coiled cord with 7 prong plug Taillights: (2) removable LED taillights Terminal Junction Box: 7 terminal heavy-duty junction box Clearance Lights: (4) Peterson side clearance lights License Plate Mount: (1) License plate mount with magnetic removable taillights
Feed System Type: Slide Box Yoke Slides: 3/4" thick steel and come with (4) 2" X 2" X 30" replaceable "Ryertex" plastic wear strips to eliminate wear of steel plates Feed Rollers: (2) horizontal top feed wheels, and (2) side vertical feed wheels Top Feed Roller Dimensions: 48" wide x 15 3/4" diameter top feed wheel, along with a 48" wide x 15-3/4" diameter top climber wheel Side Feed Roller Dimensions: 52" high x 11 1/4" diameter Bottom Feed Roller 10-5/8" diameter x 48-1/4" wide Dimensions: Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Sharpened Scraper Bar: Mounted behind bottom feed wheel to reduce wrapping Feed Wheel Shafts: 3" Feed Wheel Drive: Chain driven (#100 chain) along with hydraulic motors Number of Hydraulic Motors: 4 (DT-66063250) White Roller Stator Displacement: Top feed wheel features (2) 63.9 CID hydraulic motors, and each side feed wheel features (1) 63.9 CID hydraulic motor Bottom feed wheel is driven by (1) 18.9 CID hydraulic motor plugged into a 5:1 gear reduction drive Hydraulic Down Pressure: top yolk no hydraulics - 5,400lbs w/ hydraulics - 20,920 Attachment: Tapered fit Infeed Conveyor: 14' long infeed hopper with heavy-duty infeed conveyor using WD120 roller chain with 7/8" rivets. Conveyor chain is in (3) 36' sections and is 48" wide. Infeed Conveyor Drive: Conveyor is driven by (2) DT-66062550 hydraulic motors, along with 8-120HC drive chain Hydraulic Lift Cylinder: (2) 3" x 30" hydraulic lift cylinders
Cutting System Style: Drum Style Dimensions: 37" diameter x 48" wide RPM'S: 1,120 Knife Pockets: 8 Knives: 5/8" thick X 6" wide X 12 1/8" long Knife Style: Babbitted style knives with knife holders and clamps Anvil: 3/4” thick x 6 1/2” wide x 48” long Anvil Adjustment: (2) 5/8” adjuster bolts for secure clearance to chipper knives Adjustable Side Vents: Includes one adjustable vent on each side of the drum housing allowing the amount of air flow to be regulated Chipper Shaft: 6" diameter chipper shaft with mechanical locking assembly Chipper Bearings: (2) 5” bore, 4-bolt Pillow Block, greasable and easily replaceable bearings. Chipper Hood: Must be constructed of 3/8" steel and fold back for easy access to drum. Hood is held in place with 1/2" bolts and is secured with (1) 1" diameter removable locking pin.
Construction Chipper Base (right): 1/2" Chipper Base (left): 1/2" Belly Band: 1/2" Right Throat Side: 3/8" Left Throat Side: 3/8" Drum Skin: 1" Chipper Hood: 3/8"
Hydraulic System Type: Open Center Filtration: 10 Micron return, 100 micron suction Pump: Casappa (gear style) Hydraulic Hoses: 1/4" thru 1" double braid
Discharge Style: Stationary discharge system equipped with transport support assembly and (1) 2" x 10" discharge lift cylinder. Top of discharge features replaceable AR steel. Deflector: Up/down and side to side hydraulic chip deflector Clean-out: (3) bottom clean-out doors
Fuel Tank Capacity: 350 gallon (Lockable) steel fuel tank with aluminum sight gauge, magnetic drain plug, and is rubber shock mounted.
Hydraulic Tank Capacity: 200 gallon (Lockable) steel hydraulic tank with mesh screen strainer on suction line, spin-on oil filter on return line, magnetic drain plug, rubber shock mounted, and aluminum sight gauge
Paint Paint: CHOOSE FROM: Bandit Yellow, Alert Orange, Caterpillar Yellow, White, Green & Black
Miscellaneous Air Compressor: Optional Engine Start Panel: Engine start panel to include Auto feed tach, and GEM display with pre-programmed engine software
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
SPECIFICATION Capacity: 30"
Measurements
Throat Opening: 30" high x 48" wide Feed Rate: 120 FPM with a 5/8" chip Noise Level: 80 decibels at 50' (360 degrees around) Length: 42'
Dimensions
Width: 11' 5" Height: 12' 4" Weight: 64,000 pounds (approximate) Tongue Weight: 15,500 pounds (approximate)
Engine
Options: 765 HP tier 2, 800 HP tier 2, 875 HP tier 2, 1050 HP tier 2 diesel engines Clutch: Twin Disc Spread Bearing Mount: (2) adjustable mounts are provided to secure belt tension Drive: (3) banded 5V/5VX Kevlar belts Auto Feed: Standard
Chassis
Frame: Mainframe is made from 1/2" X 6" X 10" rectangular tubing Suspension: Tandem 25,000 pound axles Brakes: Air Tires: (8) 11R x 22.5 tires mounted on dual rims Fenders: 1/4" tandem axle steel fenders Hitch: Fifth wheel pintle hitch Tongue Jack: (2) hydraulically operated front stabilizers
Remote Option
Functions: Tether remote with 30' cord (controls feed wheel forward/reverse, yoke up/down, discharge deflector left/right and up/down, throttle, and engine e-stop).
Electrical
Battery: (2) 1,400 CCA batteries Electrical Plug: Sure flex 12' long coiled cord with 7 prong plug Taillights: (2) removable LED taillights Terminal Junction Box: 7 terminal heavy-duty junction box Clearance Lights: (4) Peterson side clearance lights License Plate Mount: (1) License plate mount with magnetic removable taillights
Feed System Type: Slide Box Yoke Slides: 3/4" thick steel and come with (4) 2" X 2" X 30" replaceable "Ryertex" plastic wear strips to eliminate wear of steel plates Feed Rollers: (2) horizontal top feed wheels, and (2) side vertical feed wheels Top Feed Roller Dimensions: 48" wide x 15 3/4" diameter top feed wheel, along with a 48" wide x 15-3/4" diameter top climber wheel Side Feed Roller Dimensions: 52" high x 11 1/4" diameter Bottom Feed Roller 10-5/8" diameter x 48-1/4" wide Dimensions: Feed Wheel End Caps: Toothed to eliminate wrapping around shafts Sharpened Scraper Bar: Mounted behind bottom feed wheel to reduce wrapping Feed Wheel Shafts: 3" Feed Wheel Drive: Chain driven (#100 chain) along with hydraulic motors Number of Hydraulic Motors: 4 (DT-66063250) White Roller Stator Displacement: Top feed wheel features (2) 63.9 CID hydraulic motors, and each side feed wheel features (1) 63.9 CID hydraulic motor Bottom feed wheel is driven by (1) 18.9 CID hydraulic motor plugged into a 5:1 gear reduction drive Hydraulic Down Pressure: top yolk no hydraulics - 5,400lbs w/ hydraulics - 20,920 Attachment: Tapered fit Infeed Conveyor: 14' long infeed hopper with heavy-duty infeed conveyor using WD120 roller chain with 7/8" rivets. Conveyor chain is in (3) 36' sections and is 48" wide. Infeed Conveyor Drive: Conveyor is driven by (2) DT-66062550 hydraulic motors, along with 8-120HC drive chain Hydraulic Lift Cylinder: (2) 3" x 30" hydraulic lift cylinders
Cutting System Style: Drum Style Dimensions: 37" diameter x 48" wide RPM'S: 1,120 Knife Pockets: 8 Knives: 5/8" thick X 6" wide X 12 1/8" long Knife Style: Babbitted style knives with knife holders and clamps Anvil: 3/4” thick x 6 1/2” wide x 48” long Anvil Adjustment: (2) 5/8” adjuster bolts for secure clearance to chipper knives Adjustable Side Vents: Includes one adjustable vent on each side of the drum housing allowing the amount of air flow to be regulated Chipper Shaft: 6" diameter chipper shaft with mechanical locking assembly Chipper Bearings: (2) 5” bore, 4-bolt Pillow Block, greasable and easily replaceable bearings. Chipper Hood: Must be constructed of 3/8" steel and fold back for easy access to drum. Hood is held in place with 1/2" bolts and is secured with (1) 1" diameter removable locking pin.
Construction Chipper Base (right): 1/2" Chipper Base (left): 1/2" Belly Band: 1/2" Right Throat Side: 3/8" Left Throat Side: 3/8" Drum Skin: 1" Chipper Hood: 3/8"
Hydraulic System Type: Open Center Filtration: 10 Micron return, 100 micron suction Pump: Casappa (gear style) Hydraulic Hoses: 1/4" thru 1" double braid
Discharge Style: Stationary discharge system equipped with transport support assembly and (1) 2" x 10" discharge lift cylinder. Top of discharge features replaceable AR steel. Deflector: Up/down and side to side hydraulic chip deflector Clean-out: (3) bottom clean-out doors
Fuel Tank Capacity: 350 gallon (Lockable) steel fuel tank with aluminum sight gauge, magnetic drain plug, and is rubber shock mounted.
Hydraulic Tank Capacity: 200 gallon (Lockable) steel hydraulic tank with mesh screen strainer on suction line, spin-on oil filter on return line, magnetic drain plug, rubber shock mounted, and aluminum sight gauge
Paint Paint: CHOOSE FROM: Bandit Yellow, Alert Orange, Caterpillar Yellow, White, Green & Black
Miscellaneous Air Compressor: Optional Engine Start Panel: Engine start panel to include Auto feed tach, and GEM display with pre-programmed engine software
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.
