Barnes Battery Backup Specifications.pdf
Series BB15-12 Professional Plumbing
Battery Backup Inverter System
www.cranepumps.com
Accessories AMP DRAW ................................Maximum 12 amp pump load VOLTAGE/WATT SWITCH ..........Displays input wattage or battery voltage ON/OFF SWITCH ........................Turns off battery power circuit without turning off the AC power LED INDICATOR .........................Indicates to the operator that the battery is not in use and the pump is running on AC power WAVE OUTPUT ..........................Modified Sine Wave Output The Battery Backup Inverter System provides added protection by allowing your standard 115 volt pump to automatically switch from AC power to battery power. The same pump can be ran on AC or DC power. The AC line is protected with 15 amps slow acting fuse. Power lights identify when the pump is operating on AC or DC power. LED POWER LIGHTS: Green On ................Run on battery power Green Off ................Run on AC power Red & Alarm ............System overheats or below 10.5 volts RED LED BATTERY CHARGE LIGHT: Solid Red ................Battery discharge below 10.5 volts Slow Flash Red .......Battery is discharged to around 11.5 volts and is recharging Fast Flash Red........Battery is operating around 12.5 volts and maintained with low current charge RECOMMENDED PUMP MODELS: • SP33 • SP50 • SU25 • SU33
Series: BB15-12 Battery Backup Inverter System
DESCRIPTION: INVERTER ALLOWS YOUR STANDARD 115 VOLT PUMP TO AUTOMATICALLY SWITCH FROM AC POWER TO BATTERY POWER.
SECTION G 41 PAGE 7/15 DATE
A Crane Co. Company
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
Series BB15-12 Battery Backup Inverter System
Professional Plumbing www.cranepumps.com
Accessories inches (mm)
* Battery Box, Battery Cover and Battery Cables not shown
MODEL NUMBER
BB15-12
PART NUMBER
135787
POWER CORD LENGTH (FT.)
5.5
BATTERY CABLES (FT.)
3
WEIGHT (LBS.)
17
POWER DRAW: NOTE: The lower the AMP draw, the longer the pump will run on the battery.
6 Amps @ 12 Volts
Approx. time to recharge a fully discharged battery.
48 Hours
A 12 Volt Deep Cycle Marine Battery is recommended
Not included
Battery Box and Cover - Dimensions (INCHES)
16.75 x 11.00 x 9.50
IMPORTANT! 1. Mounting hardware not included.
SECTION G 42 PAGE 7/15 DATE
A Crane Co. Company
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
Battery Backup Inverter System
www.cranepumps.com
Accessories AMP DRAW ................................Maximum 12 amp pump load VOLTAGE/WATT SWITCH ..........Displays input wattage or battery voltage ON/OFF SWITCH ........................Turns off battery power circuit without turning off the AC power LED INDICATOR .........................Indicates to the operator that the battery is not in use and the pump is running on AC power WAVE OUTPUT ..........................Modified Sine Wave Output The Battery Backup Inverter System provides added protection by allowing your standard 115 volt pump to automatically switch from AC power to battery power. The same pump can be ran on AC or DC power. The AC line is protected with 15 amps slow acting fuse. Power lights identify when the pump is operating on AC or DC power. LED POWER LIGHTS: Green On ................Run on battery power Green Off ................Run on AC power Red & Alarm ............System overheats or below 10.5 volts RED LED BATTERY CHARGE LIGHT: Solid Red ................Battery discharge below 10.5 volts Slow Flash Red .......Battery is discharged to around 11.5 volts and is recharging Fast Flash Red........Battery is operating around 12.5 volts and maintained with low current charge RECOMMENDED PUMP MODELS: • SP33 • SP50 • SU25 • SU33
Series: BB15-12 Battery Backup Inverter System
DESCRIPTION: INVERTER ALLOWS YOUR STANDARD 115 VOLT PUMP TO AUTOMATICALLY SWITCH FROM AC POWER TO BATTERY POWER.
SECTION G 41 PAGE 7/15 DATE
A Crane Co. Company
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
Series BB15-12 Battery Backup Inverter System
Professional Plumbing www.cranepumps.com
Accessories inches (mm)
* Battery Box, Battery Cover and Battery Cables not shown
MODEL NUMBER
BB15-12
PART NUMBER
135787
POWER CORD LENGTH (FT.)
5.5
BATTERY CABLES (FT.)
3
WEIGHT (LBS.)
17
POWER DRAW: NOTE: The lower the AMP draw, the longer the pump will run on the battery.
6 Amps @ 12 Volts
Approx. time to recharge a fully discharged battery.
48 Hours
A 12 Volt Deep Cycle Marine Battery is recommended
Not included
Battery Box and Cover - Dimensions (INCHES)
16.75 x 11.00 x 9.50
IMPORTANT! 1. Mounting hardware not included.
SECTION G 42 PAGE 7/15 DATE
A Crane Co. Company
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
