Black and Decker JE2200B Pulp Separator Replacement

Report 2 Downloads 55 Views
Black and Decker JE2200B Pulp Separator Replacement

Black and Decker JE2200B Pulp Separator Replacement This guide will assist in the replacement of the pulp separator if it is damaged.

Written By: AvaAnne Hogue

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Black and Decker JE2200B Pulp Separator Replacement

INTRODUCTION This part of the juicer is moderately hard to access and has some safety hazards associated with it. Proceed with caution when using this guide.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Black and Decker JE2200B Pulp Separator Replacement

Step 1 — Pulp Separator 

Follow steps 1-4 in this guide to access the pulp separator.

 Accessing the pulp separator involves removing the cutter. The teeth on here are sharp and will cut you. Do not touch the teeth of the cutter.

Step 2 

Hold the pulp separator on both sides and pull vertically up.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 02:31:48 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3