Black and Decker JS660 Angle Lock Replacement
Black and Decker JS660 Angle Lock Replacement
Black and Decker JS660 Angle Lock Replacement The lever used to lock the jigsaw at a certain cutting angle is not locking.
撰写者: Andrew Khouri
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 5 页
Black and Decker JS660 Angle Lock Replacement
介绍 This guide will give instructions on how to change out the lever that locks the jigsaw to the cutting angle desired.
工具:
章节:
Screwdriver (1)
Handle to change the cutting angle (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 5 页
Black and Decker JS660 Angle Lock Replacement
步骤 1 — Base
Unscrew the nine screws to open up the jigsaw
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
Unscrew the base by unscrewing the two shown in the picture.
3 / 5 页
Black and Decker JS660 Angle Lock Replacement
步骤 3
The Jigsaw base will now be off. With the new base simply do the reverse order of steps.
Assemble the base on a steady surface. 步骤 4 — Angle Lock
Remove the screw marked and the lever will slide out easily
The black screw must next be removed.
After removing the screw the lever will slide out of the jigsaw.
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 5 页
Black and Decker JS660 Angle Lock Replacement 此文档最后生成于 2017-09-03 07:20:36 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
5 / 5 页
Black and Decker JS660 Angle Lock Replacement The lever used to lock the jigsaw at a certain cutting angle is not locking.
撰写者: Andrew Khouri
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 5 页
Black and Decker JS660 Angle Lock Replacement
介绍 This guide will give instructions on how to change out the lever that locks the jigsaw to the cutting angle desired.
工具:
章节:
Screwdriver (1)
Handle to change the cutting angle (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 5 页
Black and Decker JS660 Angle Lock Replacement
步骤 1 — Base
Unscrew the nine screws to open up the jigsaw
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
Unscrew the base by unscrewing the two shown in the picture.
3 / 5 页
Black and Decker JS660 Angle Lock Replacement
步骤 3
The Jigsaw base will now be off. With the new base simply do the reverse order of steps.
Assemble the base on a steady surface. 步骤 4 — Angle Lock
Remove the screw marked and the lever will slide out easily
The black screw must next be removed.
After removing the screw the lever will slide out of the jigsaw.
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 5 页
Black and Decker JS660 Angle Lock Replacement 此文档最后生成于 2017-09-03 07:20:36 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
5 / 5 页
