Blackberry Curve 9300 Speaker Replacement
Blackberry Curve 9300 Speaker Replacement
Blackberry Curve 9300 Speaker Replacement Guide to Replace Speaker
Written By: Alek Squires
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 11
Blackberry Curve 9300 Speaker Replacement
INTRODUCTION This Speaker Replacement guide was written to help consumers fix their device as easy as possible. The steps show the steps required to replace the speaker.
TOOLS:
PARTS:
T6 Torx Screwdriver (1)
Blackberry Curve 9300 Speaker (1)
iFixit Opening Tools (1) Tweezers (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 11
Blackberry Curve 9300 Speaker Replacement
Step 1 — Battery
Place your Blackberry face down in front of you.
Locate the indent on the bottom of the back cover.
Use your fingernail to lift and remove the back cover.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 11
Blackberry Curve 9300 Speaker Replacement
Step 3
From the top, use your fingernail to lift and remove the battery.
Use the T6 Torx screwdriver to unscrew the two 5mm screws highlighted.
Step 4 — Keyboard
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 11
Blackberry Curve 9300 Speaker Replacement
Step 5
Place the phone face up and use tweezers to securely grip and lift the screen upwards.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Use your prying tool to lift the bottom edge of the front cover.
Page 5 of 11
Blackberry Curve 9300 Speaker Replacement
Step 7
Use nails to unclip sides of frame.
Lift and remove frame.
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 11
Blackberry Curve 9300 Speaker Replacement
Step 9
Lift and remove keyboard.
Locate and remove the two 5mm screws on top of keyboard base using the T6 Torx screwdriver
Step 10 — Speaker
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 11
Blackberry Curve 9300 Speaker Replacement
Step 11
Carefully pull keyboard base up and away from phone.
Disconnect keyboard base from phone completely.
Step 12
Locate and remove the four 5mm screws on the top and bottom of phone using the T6 Torx screwdriver
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 11
Blackberry Curve 9300 Speaker Replacement
Step 13
Using a prying tool, find the crease below the screen.
Insert where shown and use the tool to unclip the two sides of screen from body.
Prying tool goes approximately midway between the top and bottom edge of the screen. Step 14
From back of the phone, use finger to push the front piece of the phone away from the back piece.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 11
Blackberry Curve 9300 Speaker Replacement
Step 15
Insert tweezers into holes on top of speaker.
Step 16
Using tweezers, remove speaker from phone.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 10:10:21 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 10 of 11
Blackberry Curve 9300 Speaker Replacement
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 11 of 11
Blackberry Curve 9300 Speaker Replacement Guide to Replace Speaker
Written By: Alek Squires
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 11
Blackberry Curve 9300 Speaker Replacement
INTRODUCTION This Speaker Replacement guide was written to help consumers fix their device as easy as possible. The steps show the steps required to replace the speaker.
TOOLS:
PARTS:
T6 Torx Screwdriver (1)
Blackberry Curve 9300 Speaker (1)
iFixit Opening Tools (1) Tweezers (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 11
Blackberry Curve 9300 Speaker Replacement
Step 1 — Battery
Place your Blackberry face down in front of you.
Locate the indent on the bottom of the back cover.
Use your fingernail to lift and remove the back cover.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 11
Blackberry Curve 9300 Speaker Replacement
Step 3
From the top, use your fingernail to lift and remove the battery.
Use the T6 Torx screwdriver to unscrew the two 5mm screws highlighted.
Step 4 — Keyboard
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 11
Blackberry Curve 9300 Speaker Replacement
Step 5
Place the phone face up and use tweezers to securely grip and lift the screen upwards.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Use your prying tool to lift the bottom edge of the front cover.
Page 5 of 11
Blackberry Curve 9300 Speaker Replacement
Step 7
Use nails to unclip sides of frame.
Lift and remove frame.
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 11
Blackberry Curve 9300 Speaker Replacement
Step 9
Lift and remove keyboard.
Locate and remove the two 5mm screws on top of keyboard base using the T6 Torx screwdriver
Step 10 — Speaker
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 11
Blackberry Curve 9300 Speaker Replacement
Step 11
Carefully pull keyboard base up and away from phone.
Disconnect keyboard base from phone completely.
Step 12
Locate and remove the four 5mm screws on the top and bottom of phone using the T6 Torx screwdriver
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 11
Blackberry Curve 9300 Speaker Replacement
Step 13
Using a prying tool, find the crease below the screen.
Insert where shown and use the tool to unclip the two sides of screen from body.
Prying tool goes approximately midway between the top and bottom edge of the screen. Step 14
From back of the phone, use finger to push the front piece of the phone away from the back piece.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 11
Blackberry Curve 9300 Speaker Replacement
Step 15
Insert tweezers into holes on top of speaker.
Step 16
Using tweezers, remove speaker from phone.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 10:10:21 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 10 of 11
Blackberry Curve 9300 Speaker Replacement
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 11 of 11
