brass vxj1 junction box brass vxj1 junction box
BRASS VXJ1 JUNCTION BOX
BRASS VXJ1 JUNCTION BOX
job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]
job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Drilling template for Junction Box The template below is not to scale. Use dimensions below.
local codes. Proper grounding is required for safety. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. 45.0° ° 45.0
MOUNTING
To ensure weatherproof seal, apply weatherproof silicone sealant around the edge of the Junction Box. This is especially important with an uneven wall surface.
0.3”.30 (7.5)mm [ 7,6 ]
1. Attach the Junction Box through the Mounting Tabs to mounting surface with
appropriate hardware. Be sure the Wall Gasket is in place. Dimensions for drilling are shown on reverse.
4.5”4.50 [ 114,3 ] (114.3)mm
2. Attach Cover Plate to Junction Box with 10-24 1/2” brass screws provided. Be sure the Cover plate Gasket is in place.
3. All conduit entries are 1/2” NPS. Close all unused entries with provided Plugs. Mounting Tab
1.59” 1.59 (40.4)mm [40,4]
Wall Gasket
Junction Box
Plug
Cover Plate Gasket
Cover Plate
RAB LIGHTING BRASS JUNCTION BOX 12/18/2012
1.59” 1.59 (40.4)mm [40,4]
RA BR 12 Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance. Easy Installation & Product Help ©2012 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
VXJ1BR IN 0313
VXJ1BR IN 0313
Tech Help Line Call our experts 888 RAB-1000
rabweb.com Visit our website for product info
email Answered promptly [email protected]
BRASS VXJ1 JUNCTION BOX
BRASS VXJ1 JUNCTION BOX
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]
Drilling template for Junction Box
Drilling template for Junction Box
The template below is not to scale. Use dimensions below.
The template below is not to scale. Use dimensions below.
45.0°° 45.0
45.0° 45.0°
0.3”.30 (7.5)mm [ 7,6 ]
0.3”.30 (7.5)mm [ 7,6 ]
4.5”4.50 [ 114,3 ] (114.3)mm
1.59” 1.59 (40.4)mm [40,4]
4.5”4.50 [ 114,3 ] (114.3)mm
1.59” 1.59 (40.4)mm [40,4]
1.59” 1.59 (40.4)mm [40,4]
1.59”
1.59 (40.4)mm [40,4]
RAB LIGHTING BRASS JUNCTION BOX 12/17/2012 Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance. Easy Installation & Product Help
Easy Installation & Product Help ©2012 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
VXJ1BR IN 0313
Tech Help Line Call our experts 888 RAB-1000
rabweb.com Visit our website for product info
RA BR 12/
email Answered promptly [email protected]
©2012 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
VXJ1BR IN 0313
Tech Help Line Call our experts 888 RAB-1000
rabweb.com Visit our website for product info
email Answered promptly [email protected]
BRASS VXJ1 JUNCTION BOX
job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]
job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Drilling template for Junction Box The template below is not to scale. Use dimensions below.
local codes. Proper grounding is required for safety. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. 45.0° ° 45.0
MOUNTING
To ensure weatherproof seal, apply weatherproof silicone sealant around the edge of the Junction Box. This is especially important with an uneven wall surface.
0.3”.30 (7.5)mm [ 7,6 ]
1. Attach the Junction Box through the Mounting Tabs to mounting surface with
appropriate hardware. Be sure the Wall Gasket is in place. Dimensions for drilling are shown on reverse.
4.5”4.50 [ 114,3 ] (114.3)mm
2. Attach Cover Plate to Junction Box with 10-24 1/2” brass screws provided. Be sure the Cover plate Gasket is in place.
3. All conduit entries are 1/2” NPS. Close all unused entries with provided Plugs. Mounting Tab
1.59” 1.59 (40.4)mm [40,4]
Wall Gasket
Junction Box
Plug
Cover Plate Gasket
Cover Plate
RAB LIGHTING BRASS JUNCTION BOX 12/18/2012
1.59” 1.59 (40.4)mm [40,4]
RA BR 12 Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance. Easy Installation & Product Help ©2012 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
VXJ1BR IN 0313
VXJ1BR IN 0313
Tech Help Line Call our experts 888 RAB-1000
rabweb.com Visit our website for product info
email Answered promptly [email protected]
BRASS VXJ1 JUNCTION BOX
BRASS VXJ1 JUNCTION BOX
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]
Drilling template for Junction Box
Drilling template for Junction Box
The template below is not to scale. Use dimensions below.
The template below is not to scale. Use dimensions below.
45.0°° 45.0
45.0° 45.0°
0.3”.30 (7.5)mm [ 7,6 ]
0.3”.30 (7.5)mm [ 7,6 ]
4.5”4.50 [ 114,3 ] (114.3)mm
1.59” 1.59 (40.4)mm [40,4]
4.5”4.50 [ 114,3 ] (114.3)mm
1.59” 1.59 (40.4)mm [40,4]
1.59” 1.59 (40.4)mm [40,4]
1.59”
1.59 (40.4)mm [40,4]
RAB LIGHTING BRASS JUNCTION BOX 12/17/2012 Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance. Easy Installation & Product Help
Easy Installation & Product Help ©2012 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
VXJ1BR IN 0313
Tech Help Line Call our experts 888 RAB-1000
rabweb.com Visit our website for product info
RA BR 12/
email Answered promptly [email protected]
©2012 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
VXJ1BR IN 0313
Tech Help Line Call our experts 888 RAB-1000
rabweb.com Visit our website for product info
email Answered promptly [email protected]
