Brother PT-D200 Tape Cassette Replacement - The-Eye.eu!

Brother PT-D200 Tape Cassette Replacement

Brother PT-D200 Tape Cassette Replacement This guide will provide thorough step-by-step instructions for the replacement of the tape cassette in the Brother PT-D200.

Written By: Anna McCreary

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Brother PT-D200 Tape Cassette Replacement

INTRODUCTION This short guide will show you how to properly replace the tape cassette in your label printer.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Brother PT-D200 Tape Cassette Replacement

Step 1 — Tape Cassette



Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open.

Step 2 

Insert the tape cassette into the area outlined in red, making sure that it snaps into place.

 Our device did not come with a tape cassette but one should be inserted into the red outlined area shown.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Brother PT-D200 Tape Cassette Replacement This document was last generated on 2017-07-06 05:04:18 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4