DYMO LabelPOINT 100 Label Tape Cassette Replacement

DYMO LabelPOINT 100 Label Tape Cassette Replacement

DYMO LabelPOINT 100 Label Tape Cassette Replacement Replace an empty or malfunctioning label tape cassette.

Written By: Dustin Holifer

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

DYMO LabelPOINT 100 Label Tape Cassette Replacement

PARTS: 3/8" Standard Tape (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

DYMO LabelPOINT 100 Label Tape Cassette Replacement

Step 1 — Rear Panel



Slide the panel release button.



Lift the panel.

Step 2 — Remove Label Tape Cassette



Firmly press the cartridge release button with your finger. 



You may need to hold the cassette and/or entire device still while pressing the button.

Lift the label tape cassette out of the device.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 07:07:04 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

DYMO LabelPOINT 100 Label Tape Cassette Replacement

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4