C-Line
MACHINE,INC.
niagara 800-622-2048
Blastpro Mfg. Lavina
Prepmaster Ermator
Prosoco
Metzger McGuire
Scofield Nobles
PowerBoss
Factory Cat Diamonds
The niagara Machine Difference
erMaTor C-Line Pre-Separators: C-Line PRE-SEPARATORS - In grinding operations producing large amounts of dust, your dust extractor may need to be supplemented with a pre-separator. Pre-separators introduce an additional separation stage to capture as much dust as possible before it can reach the dust extractor. The benefit is increased efficiency in the separation of dust a from the air stream, improved filter performance and significant reduction in the frequency of filter maintenance. A Pre-separator also contributes to higher airflow, faster pick-up and extended motor life. You can have confidence in the level of filtration since our pre-separators are equipped with some of the same primary filters used in our dust extractors. Both models include our popular Longopac for safe containment and disposal of concrete dust and other harmful building materials such as asbestos and lead.
C3000
C5500
Feet On The Street Professional factory trained and certified sales force.
Experienced Technicians 5 service locations to handle all of your equipment repairs.
Parts
Used Equipment Rentals
10 Sales Locations
Huge Inventory & Same Day Shipping 3 fully stocked warehouse locations: order by 3pm for same day shipping.
5 Service Locations 325 West Front St. Erie, PA 16507 814-455-8838 814-454-0160 - FAX 1803 Associates Lane Charlotte, NC 28217 704-329-5701 704-329-5705 - FAX Bloomfield Bus. Park 415 Bloomfield Drive W. Berlin, NJ 08091 856-767-1863 856-767-1746 - FAX Blastpro Manufacturing 6021 Melrose Lane Oklahoma City, OK 73127 405-491-6464 Blastpro Manufacturing 210 E. Emerson Ave. Orange, CA 92865 714-282-6900
48.5 lb 25.5” x 22” x 58”
130 lb 21' x 28' x 57'
C3000 Pre-separator 2" Inlet
C5500 Pre-separator 3" Inlet
When your dust extractor is prematurely clogging due to large quantities of material, consider the model C3000 pre-separator. It captures 90% of the material before it reaches the dust extractor, keeping your dust extractor filters clean and extending your grinding operation longer without interruption. Equipped with Longopac for dust free containment and disposal.
Tool Kit 49 lb 25” x 22” x 58”
Your dust extractor's capacity to handle choking quantities of dust is significantly improved when supplemented with the model C5500 pre-separator. Comes with Longopack dust free direct disposal into plastic bags.
Tool Kit 130 lb 21” x 28” x 57”
Technical Support Help Line Need an answer? Talk to the guys who take the equipment apart and put it back together.
In-House Customer Support Have a question? Need to place an order? Call our friendly and knowledgeable in-house support team.
800-622-2048
niagara 800-622-2048
Blastpro Mfg. Lavina
Prepmaster Ermator
Prosoco
Metzger McGuire
Scofield Nobles
PowerBoss
Factory Cat Diamonds
The niagara Machine Difference
erMaTor C-Line Pre-Separators: C-Line PRE-SEPARATORS - In grinding operations producing large amounts of dust, your dust extractor may need to be supplemented with a pre-separator. Pre-separators introduce an additional separation stage to capture as much dust as possible before it can reach the dust extractor. The benefit is increased efficiency in the separation of dust a from the air stream, improved filter performance and significant reduction in the frequency of filter maintenance. A Pre-separator also contributes to higher airflow, faster pick-up and extended motor life. You can have confidence in the level of filtration since our pre-separators are equipped with some of the same primary filters used in our dust extractors. Both models include our popular Longopac for safe containment and disposal of concrete dust and other harmful building materials such as asbestos and lead.
C3000
C5500
Feet On The Street Professional factory trained and certified sales force.
Experienced Technicians 5 service locations to handle all of your equipment repairs.
Parts
Used Equipment Rentals
10 Sales Locations
Huge Inventory & Same Day Shipping 3 fully stocked warehouse locations: order by 3pm for same day shipping.
5 Service Locations 325 West Front St. Erie, PA 16507 814-455-8838 814-454-0160 - FAX 1803 Associates Lane Charlotte, NC 28217 704-329-5701 704-329-5705 - FAX Bloomfield Bus. Park 415 Bloomfield Drive W. Berlin, NJ 08091 856-767-1863 856-767-1746 - FAX Blastpro Manufacturing 6021 Melrose Lane Oklahoma City, OK 73127 405-491-6464 Blastpro Manufacturing 210 E. Emerson Ave. Orange, CA 92865 714-282-6900
48.5 lb 25.5” x 22” x 58”
130 lb 21' x 28' x 57'
C3000 Pre-separator 2" Inlet
C5500 Pre-separator 3" Inlet
When your dust extractor is prematurely clogging due to large quantities of material, consider the model C3000 pre-separator. It captures 90% of the material before it reaches the dust extractor, keeping your dust extractor filters clean and extending your grinding operation longer without interruption. Equipped with Longopac for dust free containment and disposal.
Tool Kit 49 lb 25” x 22” x 58”
Your dust extractor's capacity to handle choking quantities of dust is significantly improved when supplemented with the model C5500 pre-separator. Comes with Longopack dust free direct disposal into plastic bags.
Tool Kit 130 lb 21” x 28” x 57”
Technical Support Help Line Need an answer? Talk to the guys who take the equipment apart and put it back together.
In-House Customer Support Have a question? Need to place an order? Call our friendly and knowledgeable in-house support team.
800-622-2048
