C13 330
MARINE APPLICATIONS
CURSOR
C13 330
SERIES
6 CYLINDERS IN LINE - DIESEL CYCLE
Specifications Thermodynamic cycle Air intake Arrangement Bore x Stroke Total displacement Valves per cylinder Cooling system Direction of rotation (viewed facing flywheel) Engine management Injection system
mm l n.
Diesel 4 stroke TC 6L 135 x 150 12.88 4 liquid CCW electronic Electronic Unit Injector (E.U.I.)
Electrical system Voltage
V
24
type inch
SAE 1 14 rear side Fixed Geometry (water cooled) Turbo (TC) tube type included 2 - right side 1 - (supplied loose) gear driven 2 - left side aluminium included included on timing cover 24V - 5.5kW 24V - 90A by electronic central unit with EDC (Electronic Diesel Control) white “ICE”
Standard configuration Flywheel housing Flywheel size Air filter Turbocharger Heat exchanger Exhaust gas - water mixer Water charge tank Fuel filter Fuel prefilter Fuel pump Oil filter Oil sump Oil vapours blow-by circuit Oil heat exchanger Oil filler Starting motor Alternator Engine stop device Wiring harness Painting
n.
n.
color
Not included in the standard configuration Battery - minimum capacity recommended Battery - minimum cold cranking capacity recommended
2 x 180 Ah 1200 A
FPT OFFERS THE WIDEST AVAILABILITY OF ENGINE BUILD OPTIONS TO CUSTOMER SPECIFIC REQUIREMENTS WITHIN THE ENGINE SUPPLY. TO FIND OUT MORE ABOUT THE CONFIGURATIONS AND ACCESSORIES WHICH ARE AVAILABLE, CONTACT THE FPT SALES NETWORK.
C13 330 - MARINE APPLICATIONS _
243 kW (330 HP) @ 1800 rpm (D)
C13 330 - MARINE APPLICATIONS _
Rating type
D
Maximum power [*] At speed Maximum no load governed speed at max rating Minimum idling speed Mean piston speed at rated speed BMEP at max power Specific fuel consumption at full load (best value) Oil consumption at max rating Minimum starting temperature without auxiliaries Oil and oil filter maintenance interval for replacement
kW(HP) rpm rpm rpm m/s kg/cm2 g/kWh @ rpm (% of fuel cons.) °C hours
243 (330) 1800 1975 600 9 14.8 207 @ 1600 ≤ 0.2 -15° 600
* Net Power at flywheel according to ISO 3046/1, after 50 hours running, Fuel Diesel EN 590. Power tolerance 5%. Test conditions: ISO 3046/1, 25 °C air temperature, 100 kPa atmospheric pressure, 30 % relative humidity . 300
Power - KW
250 200 150 100 50 -
-
500
1.000
1.500
2.000
-
500
1.000
1.500
2.000
-
500
1.000
1.500
2.000
Torque - Nm
2.000 1.500 1.000 500 -
60 50 40 30 20 10 -
rpm Fuel density = 840 g/l
D = Heavy duty: Maximum rating utilisation up to 100% of use period, for unlimited hours per year.
L = 1813 mm. W = 1013 mm. H = 1058 mm. Dry weight (without marine gear) = 1320 kg.
Publication P3P06C001E - 09.11 Specifications subject to change without notice. Illustrations may include optional equipment.
BSFC- l/h
70
CURSOR
C13 330
SERIES
6 CYLINDERS IN LINE - DIESEL CYCLE
Specifications Thermodynamic cycle Air intake Arrangement Bore x Stroke Total displacement Valves per cylinder Cooling system Direction of rotation (viewed facing flywheel) Engine management Injection system
mm l n.
Diesel 4 stroke TC 6L 135 x 150 12.88 4 liquid CCW electronic Electronic Unit Injector (E.U.I.)
Electrical system Voltage
V
24
type inch
SAE 1 14 rear side Fixed Geometry (water cooled) Turbo (TC) tube type included 2 - right side 1 - (supplied loose) gear driven 2 - left side aluminium included included on timing cover 24V - 5.5kW 24V - 90A by electronic central unit with EDC (Electronic Diesel Control) white “ICE”
Standard configuration Flywheel housing Flywheel size Air filter Turbocharger Heat exchanger Exhaust gas - water mixer Water charge tank Fuel filter Fuel prefilter Fuel pump Oil filter Oil sump Oil vapours blow-by circuit Oil heat exchanger Oil filler Starting motor Alternator Engine stop device Wiring harness Painting
n.
n.
color
Not included in the standard configuration Battery - minimum capacity recommended Battery - minimum cold cranking capacity recommended
2 x 180 Ah 1200 A
FPT OFFERS THE WIDEST AVAILABILITY OF ENGINE BUILD OPTIONS TO CUSTOMER SPECIFIC REQUIREMENTS WITHIN THE ENGINE SUPPLY. TO FIND OUT MORE ABOUT THE CONFIGURATIONS AND ACCESSORIES WHICH ARE AVAILABLE, CONTACT THE FPT SALES NETWORK.
C13 330 - MARINE APPLICATIONS _
243 kW (330 HP) @ 1800 rpm (D)
C13 330 - MARINE APPLICATIONS _
Rating type
D
Maximum power [*] At speed Maximum no load governed speed at max rating Minimum idling speed Mean piston speed at rated speed BMEP at max power Specific fuel consumption at full load (best value) Oil consumption at max rating Minimum starting temperature without auxiliaries Oil and oil filter maintenance interval for replacement
kW(HP) rpm rpm rpm m/s kg/cm2 g/kWh @ rpm (% of fuel cons.) °C hours
243 (330) 1800 1975 600 9 14.8 207 @ 1600 ≤ 0.2 -15° 600
* Net Power at flywheel according to ISO 3046/1, after 50 hours running, Fuel Diesel EN 590. Power tolerance 5%. Test conditions: ISO 3046/1, 25 °C air temperature, 100 kPa atmospheric pressure, 30 % relative humidity . 300
Power - KW
250 200 150 100 50 -
-
500
1.000
1.500
2.000
-
500
1.000
1.500
2.000
-
500
1.000
1.500
2.000
Torque - Nm
2.000 1.500 1.000 500 -
60 50 40 30 20 10 -
rpm Fuel density = 840 g/l
D = Heavy duty: Maximum rating utilisation up to 100% of use period, for unlimited hours per year.
L = 1813 mm. W = 1013 mm. H = 1058 mm. Dry weight (without marine gear) = 1320 kg.
Publication P3P06C001E - 09.11 Specifications subject to change without notice. Illustrations may include optional equipment.
BSFC- l/h
70
