Canon AE-1 SLR Lens Mount Replacement
Canon AE-1 SLR Lens Mount Replacement
Canon AE-1 SLR Lens Mount Replacement This guide will demonstrate how to remove the SLR Lens Mount on the Canon AE-1.
Written By: Joe Blumberg
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Canon AE-1 SLR Lens Mount Replacement
INTRODUCTION This guide will teach the user how to remove a damaged SLR lens mount on the Cannon AE-1. The SLR lens mount allows the user to connect different lens to the Canon AE-1.
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Canon AE-1 SLR Lens Mount Replacement
Step 1 — SLR Lens Mount
Remove the first set of two #00 phillips screws from the lens outer casing
The first set of screws are located on the front and bottom of the lens casing
Pull the screws out and set them aside so as not to lose them
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Canon AE-1 SLR Lens Mount Replacement
Step 2
Remove the remaining two #00 phillip screws from the lens outer casing
The second set is located left and right side of the lens casing
Pull the screws out and set them aside so as not to lose them Step 3
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the screws have been taken out, you may simply remove the lens casing by pulling it away from the body of the camera.
Page 4 of 5
Canon AE-1 SLR Lens Mount Replacement
Step 4
Remove the four #00 phillips screws from the SLR Lens Mount
Step 5
After the screws have been removed, pull the SLR Lens Mount away from the body of the camera
Be aware that a pin will fall out when the SLR Lens Mount is removed. To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 09:00:39 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Canon AE-1 SLR Lens Mount Replacement This guide will demonstrate how to remove the SLR Lens Mount on the Canon AE-1.
Written By: Joe Blumberg
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Canon AE-1 SLR Lens Mount Replacement
INTRODUCTION This guide will teach the user how to remove a damaged SLR lens mount on the Cannon AE-1. The SLR lens mount allows the user to connect different lens to the Canon AE-1.
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Canon AE-1 SLR Lens Mount Replacement
Step 1 — SLR Lens Mount
Remove the first set of two #00 phillips screws from the lens outer casing
The first set of screws are located on the front and bottom of the lens casing
Pull the screws out and set them aside so as not to lose them
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Canon AE-1 SLR Lens Mount Replacement
Step 2
Remove the remaining two #00 phillip screws from the lens outer casing
The second set is located left and right side of the lens casing
Pull the screws out and set them aside so as not to lose them Step 3
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the screws have been taken out, you may simply remove the lens casing by pulling it away from the body of the camera.
Page 4 of 5
Canon AE-1 SLR Lens Mount Replacement
Step 4
Remove the four #00 phillips screws from the SLR Lens Mount
Step 5
After the screws have been removed, pull the SLR Lens Mount away from the body of the camera
Be aware that a pin will fall out when the SLR Lens Mount is removed. To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 09:00:39 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
