Canon EOS Rebel T4i Flash Replacement

Canon EOS Rebel T4i Flash Replacement

Canon EOS Rebel T4i Flash Replacement In this guide, users will be able to take apart the flash piece of the camera.

Written By: Jordan Rabold

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Canon EOS Rebel T4i Flash Replacement

INTRODUCTION This guide details how to replace the flash bulb of this camera.

TOOLS: Tweezers (1) Flush Wire Cutters (1) Phillips #000 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Canon EOS Rebel T4i Flash Replacement

Step 1 — Battery 

Locate the battery cover at the bottom of the camera.



Pull down on the black tab to open the cover.



Push the grey tab on the right side of the battery.



Remove the battery from the slot.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Canon EOS Rebel T4i Flash Replacement

Step 3 — Flash 

Using the Phillips screwdriver, unscrew the two 4.9mm Phillips head screws which are located underneath the flash.



Remove the covering.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Canon EOS Rebel T4i Flash Replacement

Step 5 

Use the tweezers to remove the excess glue around the wiring. This will allow you to cut the wire and remove the light in the next step.



Use the wire cutters to cut the wiring connected to the flash.

Step 6

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 02:37:17 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5