Claro® and Satin Colors® Wallplates and accessories
Wallplates Wallplatesand andaccessories accessories| |Designer Designer| |Claro Claro and andSatin SatinColors Colors ®®
®®
4.75 in (121 mm) Shown actual size: Maestro dimmers and 2-gang Claro wallplate in White (WH).
4.69 in (119 mm) .30 in (7.6 mm) profile
Ganging and derating
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico® wireless control, Diva®, Skylark Contour®, Skylark®
•
All Lutron wallplates are screwless, seamless, and have no visible hardware; the front plate securely snaps into the alignment adapter plate
•
Designer wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 179
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 179
•
Full line of wiring devices in Designer style opening
•
Blank inserts available for Gloss colors (DV-BI-) and Satin Colors® (SC-BI-)
•
Customize your designer wallplate with engraving. Contact customer service to get started; 1.888.LUTRON1
•
169
Volume 1 P/N 367-1746 REV B
www.lutron.com/specificationguide | 1.800.523.9466 |
Wallplates and accessories | Designer | Claro and Satin Colors ®
®
Available finishes Use BOLD color code in model number (Example: SC-1-PL) Gloss finishes
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes
SS Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories. | 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
170
Wallplates and accessories | Designer | Claro and Satin Colors ®
Field customizable 6-port frame
®
Switches
Shipped with six blanks in matching colors
Paddle turns on/off
•
•
Use with any 15 A load
•
Connectors and wallplate sold separately
•
Connectors snap in (no tools required)
•
•
General purpose switching of all sources and motor loads
•
No derating if ganged Wallplate sold separately
•
Connectors available in White (WH), unless noted
•
6-port frame*
General purpose switches (120/277 V)*
CA-6PF-XX1 SC-6PF-XX 2
Connectors for 6-port frame
Telephone/network jacks
8-conductor, RJ45 category 3 8-conductor, RJ45 category 5e 8-conductor, RJ45 category 6
Fiber jacks
MT-RJ feed through
CON-1P-C3-XX3 CON-1P-C5E-XX
3
CON-1P-C6-XX3
CON-1F-MTRJ-WH
SC simplex
CON-1F-SC-WH
LC non-flush mount
CON-1F-LC-WH
ST style
CON-1F-ST-WH
CON-1C-XX3
BNC jack
BNC connector, 50-Ohm
15 A 15 A
CA-1PS-XX1 SC-1PS-XX2
3-way 3-way
15 A 15 A
CA-3PS-XX1 SC-3PS-XX2
4-way 4-way
15 A 15 A
CA-4PS-XX1 SC-4PS-XX2
General purpose switch with locator light (120 V only)* Single-pole Single-pole
15 A 15 A
CA-1PSNL-XX4 SC-1PSNL-XX5
3-way 3-way
15 A 15 A
CA-3PSNL-XX4 SC-3PSNL-XX5
4-way 4-way
15 A 15 A
CA-4PSNL-XX4 SC-4PSNL-XX5
Cable jack
F-style, 75-Ohm coaxial cable
Single-pole Single-pole
CON-1B-WH
Connectors only for use with 6-port frame.
XX1: Gloss color codes, see pg. 170 XX 2: Satin Colors® codes, see pg. 170 XX3: Only available in White (WH) and Black (BL) XX4: Only available in Almond (AL), Ivory (IV), Light Almond (LA) and White (WH), see pg. 170 5 XX : Available in Biscuit (BI), Eggshell (ES), Goldstone (GS), Limestone (LS), Sea Glass (SG) and Snow (SW), see pg. 170 *Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
174
Appendix | Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D)
A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in)
B 2-gang box (W: 4 in x H: 3 in x D: 2.5 in)
Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging)
C 3-gang box (W: 6 in x H: 3 in x D: 2.5 in)
•
May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181
•
Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: • May require customized, wider-thanstandard wallplates •
• •
D 4-gang box (W: 8 in x H: 3 in x D: 2.5 in)
E (2) 1-gang boxes with 3/4 in spacer
May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls
Visit www.lutron.com/customganging for additional information
•
Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided.
179
Volume 1 P/N 367-1746 REV B
F Junction box (W: 4 in x H: 4 in x D: 2.5 in)
G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in)
www.lutron.com/specificationguide | 1.800.523.9466 |
®®
4.75 in (121 mm) Shown actual size: Maestro dimmers and 2-gang Claro wallplate in White (WH).
4.69 in (119 mm) .30 in (7.6 mm) profile
Ganging and derating
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico® wireless control, Diva®, Skylark Contour®, Skylark®
•
All Lutron wallplates are screwless, seamless, and have no visible hardware; the front plate securely snaps into the alignment adapter plate
•
Designer wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 179
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 179
•
Full line of wiring devices in Designer style opening
•
Blank inserts available for Gloss colors (DV-BI-) and Satin Colors® (SC-BI-)
•
Customize your designer wallplate with engraving. Contact customer service to get started; 1.888.LUTRON1
•
169
Volume 1 P/N 367-1746 REV B
www.lutron.com/specificationguide | 1.800.523.9466 |
Wallplates and accessories | Designer | Claro and Satin Colors ®
®
Available finishes Use BOLD color code in model number (Example: SC-1-PL) Gloss finishes
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes
SS Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories. | 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
170
Wallplates and accessories | Designer | Claro and Satin Colors ®
Field customizable 6-port frame
®
Switches
Shipped with six blanks in matching colors
Paddle turns on/off
•
•
Use with any 15 A load
•
Connectors and wallplate sold separately
•
Connectors snap in (no tools required)
•
•
General purpose switching of all sources and motor loads
•
No derating if ganged Wallplate sold separately
•
Connectors available in White (WH), unless noted
•
6-port frame*
General purpose switches (120/277 V)*
CA-6PF-XX1 SC-6PF-XX 2
Connectors for 6-port frame
Telephone/network jacks
8-conductor, RJ45 category 3 8-conductor, RJ45 category 5e 8-conductor, RJ45 category 6
Fiber jacks
MT-RJ feed through
CON-1P-C3-XX3 CON-1P-C5E-XX
3
CON-1P-C6-XX3
CON-1F-MTRJ-WH
SC simplex
CON-1F-SC-WH
LC non-flush mount
CON-1F-LC-WH
ST style
CON-1F-ST-WH
CON-1C-XX3
BNC jack
BNC connector, 50-Ohm
15 A 15 A
CA-1PS-XX1 SC-1PS-XX2
3-way 3-way
15 A 15 A
CA-3PS-XX1 SC-3PS-XX2
4-way 4-way
15 A 15 A
CA-4PS-XX1 SC-4PS-XX2
General purpose switch with locator light (120 V only)* Single-pole Single-pole
15 A 15 A
CA-1PSNL-XX4 SC-1PSNL-XX5
3-way 3-way
15 A 15 A
CA-3PSNL-XX4 SC-3PSNL-XX5
4-way 4-way
15 A 15 A
CA-4PSNL-XX4 SC-4PSNL-XX5
Cable jack
F-style, 75-Ohm coaxial cable
Single-pole Single-pole
CON-1B-WH
Connectors only for use with 6-port frame.
XX1: Gloss color codes, see pg. 170 XX 2: Satin Colors® codes, see pg. 170 XX3: Only available in White (WH) and Black (BL) XX4: Only available in Almond (AL), Ivory (IV), Light Almond (LA) and White (WH), see pg. 170 5 XX : Available in Biscuit (BI), Eggshell (ES), Goldstone (GS), Limestone (LS), Sea Glass (SG) and Snow (SW), see pg. 170 *Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
174
Appendix | Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D)
A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in)
B 2-gang box (W: 4 in x H: 3 in x D: 2.5 in)
Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging)
C 3-gang box (W: 6 in x H: 3 in x D: 2.5 in)
•
May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181
•
Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: • May require customized, wider-thanstandard wallplates •
• •
D 4-gang box (W: 8 in x H: 3 in x D: 2.5 in)
E (2) 1-gang boxes with 3/4 in spacer
May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls
Visit www.lutron.com/customganging for additional information
•
Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided.
179
Volume 1 P/N 367-1746 REV B
F Junction box (W: 4 in x H: 4 in x D: 2.5 in)
G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in)
www.lutron.com/specificationguide | 1.800.523.9466 |
