Wallplates and accessories | Designer | Claro® and Satin Colors ...
Wallplates Wallplatesand andaccessories accessories| |Designer Designer| |Claro Claro and andSatin SatinColors Colors ®®
®®
4.75 in (121 mm) Shown actual size: Maestro dimmers and 2-gang Claro wallplate in White (WH).
4.69 in (119 mm) .30 in (7.6 mm) profile
Ganging and derating
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico® wireless control, Diva®, Skylark Contour®, Skylark®
•
All Lutron wallplates are screwless, seamless, and have no visible hardware; the front plate securely snaps into the alignment adapter plate
•
Designer wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 179
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 179
•
Full line of wiring devices in Designer style opening
•
Blank inserts available for Gloss colors (DV-BI-) and Satin Colors® (SC-BI-)
•
Customize your designer wallplate with engraving. Contact customer service to get started; 1.888.LUTRON1
•
169
Volume 1 P/N 367-1746 REV B
www.lutron.com/specificationguide | 1.800.523.9466 |
Wallplates and accessories | Designer | Claro and Satin Colors ®
®
Available finishes Use BOLD color code in model number (Example: SC-1-PL) Gloss finishes
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes
SS Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories. | 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
170
Wallplates and accessories | Designer | Claro and Satin Colors ®
®
Receptacles Wallplate sold separately
•
6-gang* CW-6-XX1 SC-6-XX2 W: 12.00 in (305 mm); H: 4.69 in (119 mm); P: .30 in (7.6 mm)
Tamper resistant receptacles* 15 A 15 A
125 V 125 V
CARS-15-TR-XX3 SCRS-15-TR-XX2
20 A
125 V
SCRS-20-TR-XX2
15 A 15 A
125 V 125 V
CAR-15 -XX3 SCR-15-XX2
20 A
125 V
SCR-20-XX2
Receptacles*
Cable jacks F-style, 75-Ohm coaxial cable
•
Wallplate sold separately
•
GFCI Receptacles Press test button to confirm LED indicator status
•
Press reset button to reset GFCI after circuit interruption
•
Single cable jack* CA-CJ-XX3 SC-CJ-XX2
Tamper resistant shutter mechanism
•
Telephone jacks 6-conductor telephone jack, RJ11
•
Wallplate sold separately
•
Tamper resistant GFCI receptacles* 15 A 15 A
125 V GFCI 125 V
CAR-15-GFTR-XX3 SCR-15-GFTR-XX2
20 A
125 V
SCR-20-GFTR-XX2
GFCI
Single telephone jack* CA-PJ-XX3 SC-PJ-XX2
XX1: Gloss and Stainless Steel color codes, see pg. 170 2 XX : Satin color codes, see pg. 170 XX3: Gloss color codes, see pg. 170
Multi-gang dimmer installations may require derating, see pg. 179.
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
172
Appendix | Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D)
A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in)
B 2-gang box (W: 4 in x H: 3 in x D: 2.5 in)
Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging)
C 3-gang box (W: 6 in x H: 3 in x D: 2.5 in)
•
May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181
•
Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: • May require customized, wider-thanstandard wallplates •
• •
D 4-gang box (W: 8 in x H: 3 in x D: 2.5 in)
E (2) 1-gang boxes with 3/4 in spacer
May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls
Visit www.lutron.com/customganging for additional information
•
Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided.
179
Volume 1 P/N 367-1746 REV B
F Junction box (W: 4 in x H: 4 in x D: 2.5 in)
G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in)
www.lutron.com/specificationguide | 1.800.523.9466 |
®®
4.75 in (121 mm) Shown actual size: Maestro dimmers and 2-gang Claro wallplate in White (WH).
4.69 in (119 mm) .30 in (7.6 mm) profile
Ganging and derating
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico® wireless control, Diva®, Skylark Contour®, Skylark®
•
All Lutron wallplates are screwless, seamless, and have no visible hardware; the front plate securely snaps into the alignment adapter plate
•
Designer wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 179
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 179
•
Full line of wiring devices in Designer style opening
•
Blank inserts available for Gloss colors (DV-BI-) and Satin Colors® (SC-BI-)
•
Customize your designer wallplate with engraving. Contact customer service to get started; 1.888.LUTRON1
•
169
Volume 1 P/N 367-1746 REV B
www.lutron.com/specificationguide | 1.800.523.9466 |
Wallplates and accessories | Designer | Claro and Satin Colors ®
®
Available finishes Use BOLD color code in model number (Example: SC-1-PL) Gloss finishes
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes
SS Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories. | 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
170
Wallplates and accessories | Designer | Claro and Satin Colors ®
®
Receptacles Wallplate sold separately
•
6-gang* CW-6-XX1 SC-6-XX2 W: 12.00 in (305 mm); H: 4.69 in (119 mm); P: .30 in (7.6 mm)
Tamper resistant receptacles* 15 A 15 A
125 V 125 V
CARS-15-TR-XX3 SCRS-15-TR-XX2
20 A
125 V
SCRS-20-TR-XX2
15 A 15 A
125 V 125 V
CAR-15 -XX3 SCR-15-XX2
20 A
125 V
SCR-20-XX2
Receptacles*
Cable jacks F-style, 75-Ohm coaxial cable
•
Wallplate sold separately
•
GFCI Receptacles Press test button to confirm LED indicator status
•
Press reset button to reset GFCI after circuit interruption
•
Single cable jack* CA-CJ-XX3 SC-CJ-XX2
Tamper resistant shutter mechanism
•
Telephone jacks 6-conductor telephone jack, RJ11
•
Wallplate sold separately
•
Tamper resistant GFCI receptacles* 15 A 15 A
125 V GFCI 125 V
CAR-15-GFTR-XX3 SCR-15-GFTR-XX2
20 A
125 V
SCR-20-GFTR-XX2
GFCI
Single telephone jack* CA-PJ-XX3 SC-PJ-XX2
XX1: Gloss and Stainless Steel color codes, see pg. 170 2 XX : Satin color codes, see pg. 170 XX3: Gloss color codes, see pg. 170
Multi-gang dimmer installations may require derating, see pg. 179.
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
172
Appendix | Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D)
A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in)
B 2-gang box (W: 4 in x H: 3 in x D: 2.5 in)
Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging)
C 3-gang box (W: 6 in x H: 3 in x D: 2.5 in)
•
May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181
•
Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: • May require customized, wider-thanstandard wallplates •
• •
D 4-gang box (W: 8 in x H: 3 in x D: 2.5 in)
E (2) 1-gang boxes with 3/4 in spacer
May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls
Visit www.lutron.com/customganging for additional information
•
Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided.
179
Volume 1 P/N 367-1746 REV B
F Junction box (W: 4 in x H: 4 in x D: 2.5 in)
G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in)
www.lutron.com/specificationguide | 1.800.523.9466 |
