FEATURES MARC Coil Cleaner automatically cleans chiller coils in place, indoors or outdoors. It removes accumulated dirt, grease, lint, tobacco film, etc. to increase efficiency. MARC Coil Cleaner effectively penetrates buildups without agitation, and inhibits corrosion. Coils are rinsed clean through natural condensate action. MARC Coil Cleaner is totally water soluble, so it rinses off completely. It contains no acids or harsh alkalis. MARC Coil Cleaner can also be used to clean permanent-type filters. DANGER! Contains 2-butoxyethanol and sodium metasilicate. Harmful if swallowed, in contact with skin or if inhaled. Causes severe skin burns and serious eye damage. May cause respiratory irritation. Harmful if swallowed. PRECAUTIONARY STATEMENTS: Do not breathe mist or vapors. Wash hands, face and any skin contacted thoroughly after handling. Do not eat or drink when using this product. Wear protective gloves, protective clothing, eye protection and face protection. Use only in a well-ventilated area. IF SWALLOWED: Immediately call a poison center or physician. Rinse mouth. Do NOT induce vomiting. IF ON SKIN OR HAIR: Take off immediately all contaminated clothing. Wash skin and hair with plenty of soap and water. Call a poison center or physician if you feel unwell. Wash contaminated clothing before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a poison center or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center or a physician. Keep container tightly closed. Store locked up in a well-ventilated area. Dispose of in an approved waste disposal facility. KEEP OUT OF REACH OF CHILDREN! HMIS/NFPA Ratings: Health-2, Flammability-0 Reactivity-0 MADE IN USA.
DIRECTIONS FOR USE
COIL CLEANER
Dilute 1 part MARC Coil Cleaner with 3 parts water. Spray diluted product directly onto the fins of the coil, making sure to penetrate into all areas. Turn on air conditioning unit and allow normal cycling to create condensation on the chiller coils. This moisture will carry the product and dissolved buildups down into the condensate pan and drain. For faster cleaning, allow MARC Coil Cleaner to work 5 minutes, and then hose off with water.
No-Rinse Chiller Coil Cleaner and Filter Treatment
Permanent-type filters may be dip tank-cleaned with MARC Coil Cleaner using the same 1:3 dilution. Rinse filter with water.
▪ Cleans Coils in Place ▪ ▪ Powerful Penetrating Action ▪ ▪ Cleans and Treats Filters ▪ ▪ Increases Efficiency ▪
As a filter treatment to pick up dirt and dust, spray or dip undiluted MARC Coil Cleaner on the filter.