Cold Weather Kits - Platt
Eaton Standby Generator Accessories
Model 5630CH Model 5631CH Model 5632CH Model 5633CH
Battery Warmer Model 5634CH Model 5635CH Model 5629CH
Cold Weather Kits The kit consists of a battery warmer that has a thermostat built into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 10 degrees. When installing the kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.
Models 5629CH*
1.6L 25/30kW
5630CH*
2.4L 22/27/36/45/60kW
5631CH*
4.2L 48kW
5632CH*
4.6L and 6.8L 80/150kW
5633CH*
6.8L 70/100/130kW
5634CH
This kit is intended for use with the 8kW air cooled product. The connection is a 120V plug that will require a voltage source.
5635CH
This kit is intended for use with air-cooled product that utilizes the digital controller (10-20kW). The connections consist of 2 ring terminals that are attached to the appropriate neutral and ground and a bare lead that is inserted into the AC connection block that is connected inside the generator control panel.
*Kits include an oil filter for conversion over to 5W-30 synthetic oil.
http://generators.eaton.com
Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com
© 2009 Eaton Corporation All Rights Reserved Printed in USA Publication No. PAXXXXXXXXE / XXX Month 2009
Eaton Standby Generator Accessories
Engine Block Heater Model 5615CH Model 5616CH Model 5618CH
Model 5619CH Model 5620CH Model 5667CH
Extreme Cold Weather Kits This kit includes the appropriate block heater, installation instructions and all necessary mounting hardware for extreme weather protection.
OIL RECOMMENDATIONS SAE 30
This kit is to be used in conjunction with the appropriate Cold Weather Kit that contains the necessary battery warmer assembly. If not done already, the oil must be replaced with the appropriate synthetic oil. Please note it is critical that the Extreme Cold Weather Kit be installed properly, as improper installation procedures can inhibit proper generator function.
10W-30
Synthetic 5W-30
F
-20
C -30
-10
0
10
-20
20
-10
32
40
0
60 10
80 20
100 30
40
Temperature Range of Expected Use
KIT CONTENTS
http://generators.eaton.com
Model
Description/Applicable Sizes
Use with Cold Weather Kit
5615CH
1.6L 25/30kW
5629CH
5616CH
2.4L 22/27/36/45/60kW
5630CH
5618CH
4.2L 48kW
5631CH
5619CH
4.6L 80kW
5632CH
5620CH
6.8L 70kW/100kW/130kW
5633CH
5667CH
6.8L 150kW
5632CH
Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com
© 2009 Eaton Corporation All Rights Reserved Printed in USA Publication No. PAXXXXXXXXE / XXX Month 2009
Model 5630CH Model 5631CH Model 5632CH Model 5633CH
Battery Warmer Model 5634CH Model 5635CH Model 5629CH
Cold Weather Kits The kit consists of a battery warmer that has a thermostat built into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 10 degrees. When installing the kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.
Models 5629CH*
1.6L 25/30kW
5630CH*
2.4L 22/27/36/45/60kW
5631CH*
4.2L 48kW
5632CH*
4.6L and 6.8L 80/150kW
5633CH*
6.8L 70/100/130kW
5634CH
This kit is intended for use with the 8kW air cooled product. The connection is a 120V plug that will require a voltage source.
5635CH
This kit is intended for use with air-cooled product that utilizes the digital controller (10-20kW). The connections consist of 2 ring terminals that are attached to the appropriate neutral and ground and a bare lead that is inserted into the AC connection block that is connected inside the generator control panel.
*Kits include an oil filter for conversion over to 5W-30 synthetic oil.
http://generators.eaton.com
Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com
© 2009 Eaton Corporation All Rights Reserved Printed in USA Publication No. PAXXXXXXXXE / XXX Month 2009
Eaton Standby Generator Accessories
Engine Block Heater Model 5615CH Model 5616CH Model 5618CH
Model 5619CH Model 5620CH Model 5667CH
Extreme Cold Weather Kits This kit includes the appropriate block heater, installation instructions and all necessary mounting hardware for extreme weather protection.
OIL RECOMMENDATIONS SAE 30
This kit is to be used in conjunction with the appropriate Cold Weather Kit that contains the necessary battery warmer assembly. If not done already, the oil must be replaced with the appropriate synthetic oil. Please note it is critical that the Extreme Cold Weather Kit be installed properly, as improper installation procedures can inhibit proper generator function.
10W-30
Synthetic 5W-30
F
-20
C -30
-10
0
10
-20
20
-10
32
40
0
60 10
80 20
100 30
40
Temperature Range of Expected Use
KIT CONTENTS
http://generators.eaton.com
Model
Description/Applicable Sizes
Use with Cold Weather Kit
5615CH
1.6L 25/30kW
5629CH
5616CH
2.4L 22/27/36/45/60kW
5630CH
5618CH
4.2L 48kW
5631CH
5619CH
4.6L 80kW
5632CH
5620CH
6.8L 70kW/100kW/130kW
5633CH
5667CH
6.8L 150kW
5632CH
Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com
© 2009 Eaton Corporation All Rights Reserved Printed in USA Publication No. PAXXXXXXXXE / XXX Month 2009
