compressed air systems & refrigerated air dryers - Cleveland Range
Project ________________________________ Item __________________________________ Quantity _______________________________ FCSI Section ____________________________
COOK CHILL SYSTEMS
Approval _______________________________ Date __________________________________
COMPRESSED AIR SYSTEMS & REFRIGERATED AIR DRYERS MODELS:
COMPRESSED AIR SYSTEMS Cleveland Standard Features
c CAS-5 c CAS-7.5 c CAS-10 c CAS-15 c CAS-20
(VERTICAL) (VERTICAL) (HORIZONTAL) (HORIZONTAL) (HORIZONTAL)
■ Air Compressor mounted on A.S.M.E. rated Receiver Tank ■ Baldor high efficiency Motor ■ Magnetic Starter with Thermal Overloads, completely wired and ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
mounted Balanced Pump, external and internal Cast Iron Cylinders Forged Crankshaft and Pistons High quality cast iron Piston Rings Cast aluminum Finned Inner Coolers Inner Cooler Safety Valve Manual Drain for Air Receiver Tank Automatic Start and Stop Control 14 gauge Belt Guard 1/2” Combination Filter/Pressure Regulator/Guage 80 gallon Receiver Tank for CAS-5 & CAS-7.5 120 gallon Receiver Tank for CAS-10, CAS-15 & CAS-20 Accepted for use in U.S.D.A. Inspected Facilities
CAS-7.5
CAS-10
Short Form Specifications Shall be CLEVELAND Model CAS-_____, COMPRESSED AIR SYSTEM, consisting of Air Compressor & Receiver Tank, ___ H.P. (horse power); High efficiency Baldor Motor with magnetic Starter, Automatic Start and Stop Control; balanced External and Internal Pump; 14 gauge Steel; Belt Guard; 1/2” combination Filter / Pressure Regulator; ____ gallon Receiver Tank.
Options & Accessories
Vibration Isolation Pads (set of four) 3/4” Diameter Stainless Steel Flex Hose Refrigerated Air Dryer with 37˚F Dew Point Programmable, Automatic Drain Valve for Receiver Tank Larger models availabe on request
REFRIGERATED AIR DRYERS Cleveland Standard Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Refrigerated air dryer for high inlet temperature Unique aluminum technology heat exchanger design Precise pressure dew point control over full operating range Solid State Controller Integrated after-cooler and 3-micron filter / separator Dual timed electronic drains with isolation valve and strainer Illuminated ON/OFF switch Drain set and push to test buttons Hot gas by-pass capillary tube controls R-134a refrigerant for environmentally friendly applications
MODELS:
c CAS-AHT-20 (for CAS-5) c CAS-AHT-30 (for CAS-7.5) c CAS-AHT-40 (for CAS-10) c CAS-AHT-50 (for CAS-15) c CAS-AHT-75 (for CAS-20)
Short Form Specifications Shall be Cleveland Model CAS-AHT _____, Refrigerated Air Dryer for Series “CAS” Compressed Air Systems; precise pressure dew point control over full operating range; dual, programmable electronic timer drains; integrated aftercooler and 3-micron filter / separator; “ACT” aluminum cooling technology for efficient heat transfer, reduced energy consumption and low pressure drop.
XIV
53
SECT. PAGE CLE_5689_CAS_0616
18301 St. Clair Street
Tel: 1-216-481-4900
Cleveland, Ohio, U.S.A. 44110
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
CAS-AHT-20, 30, 40 & 50
COMPRESSED AIR SYSTEM AND AIR DRYER RECOMMENDED PIPING DIAGRAM
1 Air Compressor
IN
16.38" 2.60"
2 By-Pass Group 2
AIR IN A AIR OUT A
3 AHT Dryer 4 Compressed Air Tank
4
3.50"
5 Filter (supplied by installer)
OUT
5
25.38"
6 Condensate Drain
1
19.88"
6 6
6
6
D DRAINS
3
CAS-AHT-75
A
C
16.75"
Drain: Each dryer comes fitted with flexible plastics tubing (1/4"dia. x 60”L).
18.38”
A
2.25"
C
16.00"
AIR IN A 15.88"
PLAN VIEW AIR OUT A
69" A
PLAN VIEW
44.50" 26.63"
D DRAINS
A
B
A
B
A FRONT VIEW
FRONT VIEW D
D
40” APD
E
Clearance:
E
Leave at least 40” of free space on every side of the drier for ventilation purposes and maintenance operations.
A APD (AUTO PROGRAMMABLE DRAIN "OPTIONAL") 120V/1PH - 5 AMPS
20”
16.5”
40”
40”
42” 16.5”
40”
CAS-5 & CAS-7.5
AIR COMPRESSOR MODELS
CAS-10, CAS-15 & CAS-20
A
B
C
D
CAPACITY AT 100 PSIG
E
AIR OUTLET
DRAIN
ELECTRICAL 208/3/60 D1
CAS-5 CAS-7.5 CAS-10 CAS-15 CAS-20
37” 37” 69” 69” 69”
74” 79” 55” 55” 55”
26” 26” 30” 30” 30”
40 1/2” 40 1/2” 16” 16” 16”
REFRIGERATED AIR DRYER MODELS
13 1/2” 13 1/2” 13 1/2”
AIR
AIR FLOW
REPLACEMENT FILTER ELEMENT
1/2” NPT-F 1/2” NPT-F 1/2” NPT-F 1/2” NPT-F 1” NPT-F
20 SCFM 30 SCFM 30 SCFM 50 SCFM 75 SCFM
TP30 TP30 TP30 TP45 TP125
D1
CAS-AHT-20 (for CAS-5) CAS-AHT-30 (for CAS-7.5) CAS-AHT-40 (for CAS-10) CAS-AHT-50 (for CAS-15) CAS-AHT-75 (for CAS- 20) *Comes standard with Cord & Plug
19 CFM 26 CFM 40 CFM 47.3 CFM 58.4 CFM
2” NPT 2” NPT 2” NPT 2” NPT 2” NPT
DRAIN FLEXIBLE TUBING
REFRIGERANT D1D2
D2
R-134a R-134a R-134a R-134a R-134a
B
B
1” NPT 1” NPT 1” NPT 1” NPT 1” NPT
15 AMPS 22 AMPS 28.5 AMPS 48.3 AMPS 62.1 AMPS
ELECTRICAL 115/1/60* AMPS
SHIPPING WEIGHT
2.7 3.0 3.9 5.1 8.9
86 LBS 94 LBS 96 LBS 97 LBS 111 LBS
D
1/4” 1/4” 1/4” 1/4” 1/4”
B D
D2
D1
(NOT TO SCALE)
Cleveland Range reserves right of design improvement or modification, as warranted.
XIV
54
SECT. PAGE CLE_5689_CAS_0616 Litho in USA
D2
COOK CHILL SYSTEMS
Approval _______________________________ Date __________________________________
COMPRESSED AIR SYSTEMS & REFRIGERATED AIR DRYERS MODELS:
COMPRESSED AIR SYSTEMS Cleveland Standard Features
c CAS-5 c CAS-7.5 c CAS-10 c CAS-15 c CAS-20
(VERTICAL) (VERTICAL) (HORIZONTAL) (HORIZONTAL) (HORIZONTAL)
■ Air Compressor mounted on A.S.M.E. rated Receiver Tank ■ Baldor high efficiency Motor ■ Magnetic Starter with Thermal Overloads, completely wired and ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
mounted Balanced Pump, external and internal Cast Iron Cylinders Forged Crankshaft and Pistons High quality cast iron Piston Rings Cast aluminum Finned Inner Coolers Inner Cooler Safety Valve Manual Drain for Air Receiver Tank Automatic Start and Stop Control 14 gauge Belt Guard 1/2” Combination Filter/Pressure Regulator/Guage 80 gallon Receiver Tank for CAS-5 & CAS-7.5 120 gallon Receiver Tank for CAS-10, CAS-15 & CAS-20 Accepted for use in U.S.D.A. Inspected Facilities
CAS-7.5
CAS-10
Short Form Specifications Shall be CLEVELAND Model CAS-_____, COMPRESSED AIR SYSTEM, consisting of Air Compressor & Receiver Tank, ___ H.P. (horse power); High efficiency Baldor Motor with magnetic Starter, Automatic Start and Stop Control; balanced External and Internal Pump; 14 gauge Steel; Belt Guard; 1/2” combination Filter / Pressure Regulator; ____ gallon Receiver Tank.
Options & Accessories
Vibration Isolation Pads (set of four) 3/4” Diameter Stainless Steel Flex Hose Refrigerated Air Dryer with 37˚F Dew Point Programmable, Automatic Drain Valve for Receiver Tank Larger models availabe on request
REFRIGERATED AIR DRYERS Cleveland Standard Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Refrigerated air dryer for high inlet temperature Unique aluminum technology heat exchanger design Precise pressure dew point control over full operating range Solid State Controller Integrated after-cooler and 3-micron filter / separator Dual timed electronic drains with isolation valve and strainer Illuminated ON/OFF switch Drain set and push to test buttons Hot gas by-pass capillary tube controls R-134a refrigerant for environmentally friendly applications
MODELS:
c CAS-AHT-20 (for CAS-5) c CAS-AHT-30 (for CAS-7.5) c CAS-AHT-40 (for CAS-10) c CAS-AHT-50 (for CAS-15) c CAS-AHT-75 (for CAS-20)
Short Form Specifications Shall be Cleveland Model CAS-AHT _____, Refrigerated Air Dryer for Series “CAS” Compressed Air Systems; precise pressure dew point control over full operating range; dual, programmable electronic timer drains; integrated aftercooler and 3-micron filter / separator; “ACT” aluminum cooling technology for efficient heat transfer, reduced energy consumption and low pressure drop.
XIV
53
SECT. PAGE CLE_5689_CAS_0616
18301 St. Clair Street
Tel: 1-216-481-4900
Cleveland, Ohio, U.S.A. 44110
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
CAS-AHT-20, 30, 40 & 50
COMPRESSED AIR SYSTEM AND AIR DRYER RECOMMENDED PIPING DIAGRAM
1 Air Compressor
IN
16.38" 2.60"
2 By-Pass Group 2
AIR IN A AIR OUT A
3 AHT Dryer 4 Compressed Air Tank
4
3.50"
5 Filter (supplied by installer)
OUT
5
25.38"
6 Condensate Drain
1
19.88"
6 6
6
6
D DRAINS
3
CAS-AHT-75
A
C
16.75"
Drain: Each dryer comes fitted with flexible plastics tubing (1/4"dia. x 60”L).
18.38”
A
2.25"
C
16.00"
AIR IN A 15.88"
PLAN VIEW AIR OUT A
69" A
PLAN VIEW
44.50" 26.63"
D DRAINS
A
B
A
B
A FRONT VIEW
FRONT VIEW D
D
40” APD
E
Clearance:
E
Leave at least 40” of free space on every side of the drier for ventilation purposes and maintenance operations.
A APD (AUTO PROGRAMMABLE DRAIN "OPTIONAL") 120V/1PH - 5 AMPS
20”
16.5”
40”
40”
42” 16.5”
40”
CAS-5 & CAS-7.5
AIR COMPRESSOR MODELS
CAS-10, CAS-15 & CAS-20
A
B
C
D
CAPACITY AT 100 PSIG
E
AIR OUTLET
DRAIN
ELECTRICAL 208/3/60 D1
CAS-5 CAS-7.5 CAS-10 CAS-15 CAS-20
37” 37” 69” 69” 69”
74” 79” 55” 55” 55”
26” 26” 30” 30” 30”
40 1/2” 40 1/2” 16” 16” 16”
REFRIGERATED AIR DRYER MODELS
13 1/2” 13 1/2” 13 1/2”
AIR
AIR FLOW
REPLACEMENT FILTER ELEMENT
1/2” NPT-F 1/2” NPT-F 1/2” NPT-F 1/2” NPT-F 1” NPT-F
20 SCFM 30 SCFM 30 SCFM 50 SCFM 75 SCFM
TP30 TP30 TP30 TP45 TP125
D1
CAS-AHT-20 (for CAS-5) CAS-AHT-30 (for CAS-7.5) CAS-AHT-40 (for CAS-10) CAS-AHT-50 (for CAS-15) CAS-AHT-75 (for CAS- 20) *Comes standard with Cord & Plug
19 CFM 26 CFM 40 CFM 47.3 CFM 58.4 CFM
2” NPT 2” NPT 2” NPT 2” NPT 2” NPT
DRAIN FLEXIBLE TUBING
REFRIGERANT D1D2
D2
R-134a R-134a R-134a R-134a R-134a
B
B
1” NPT 1” NPT 1” NPT 1” NPT 1” NPT
15 AMPS 22 AMPS 28.5 AMPS 48.3 AMPS 62.1 AMPS
ELECTRICAL 115/1/60* AMPS
SHIPPING WEIGHT
2.7 3.0 3.9 5.1 8.9
86 LBS 94 LBS 96 LBS 97 LBS 111 LBS
D
1/4” 1/4” 1/4” 1/4” 1/4”
B D
D2
D1
(NOT TO SCALE)
Cleveland Range reserves right of design improvement or modification, as warranted.
XIV
54
SECT. PAGE CLE_5689_CAS_0616 Litho in USA
D2
