Confined Space Entry - Workplace Training Centre
Confined Space Entry RIIWHS202D – Enter and Work in a Confined Space RIIRIS201D – Conduct Local Risk Control MSMWHS216 – Operate Breathing Apparatus MSMWHS217 – Gas Test Atmospheres MSMPER200 – Work in accordance with an Issued Permit Course Overview This course covers the requirements for those who are required to work in confined spaces in accordance with Australian Standard 2865.2009. Successfully completing this course will allow you to identify, plan, enter and work in confined spaces with or without a breathing apparatus. This course does not cover the requirements for supervising confined space entry or issuing work permits. This course meets Sydney Water confined space entry requirements Prerequisites There are no prerequisites for this course. Workplace Training Centre’s conditions for assessment: Speak and understand English at a level to be able to participate in the training and assessment. Note: Oral assessments can be arranged for applicants with writing and reading difficulties.
Able to produce sufficient identification with name and photo (ie drivers licence, passport etc). Learning outcome On completion of the course, participants will have gained the following skills and knowledge to: Legislative Requirements: WHS, Australian Standards and Codes of Practice Identify confined spaces Planning to work: Hazard management, exposure standards and consultation Following Procedures: Equipment inspections, atmospheric testing, entry permits and reporting Confined Space Entry: Access, egress, height safety, rescue Equipment use: PPE, breathing apparatus, atmospheric monitors, communications Conclude Work: Clean up, inspection, storage and reporting Duration Total duration is 2 days. Training and assessment is conducted on each day. Course Outline Day 1 – Presentation, discussion and confined space entry activities Practical entry exercises, knowledge and practical assessments Day 2 – Presentation, discussion and breathing apparatus activities Practical breathing apparatus exercises, knowledge and practical assessments
Outcome Upon successful completion of the course, a nationally recognised Statement of Attainment RIIWHS202D – Enter and Work in a Confined Space, RIIRIS201D – Conduct Local Risk Control MSMWHS216 – Operate Breathing Apparatus, MSMWHS217 – Gas Test Atmospheres MSMPER200 – Work in accordance with an Issued Permit and a convenient wallet sized card is issued by Workplace Training Centre.
www.workplacetrainingcentre.edu.au Unit 12 / 70 Holbeche Road Arndell Park NSW 2148
1300 668 141 RTO: 91390 2017.3
[email protected] ABN: 24127418106
Location Training can be conducted at Workplace Training Centre’s facilities located in Arndell Park NSW or if required, can also be conducted on your site providing the following requirements are met: Training room with tables, chairs and screen (or blank wall for a projector) Suitable confined space or simulated confined space for practical training Appropriate PPE and equipment for the practical scenarios
Course Sizes Maximum 8 participants Minimum 4 participants for onsite training
Fees and Charges The course fee is $550.00 per person (GST exempt). This fee includes all course materials. Travel and parking costs may apply to onsite training. Please contact us for group training rates. Where Workplace Training Centre receives sufficient notice of cancellation (at least 48 hours), a refund of fees may be available. Cancellations within 48 hours may incur a 20% cancellation fee. No refund is given for non-attendance or cancellation on day of training. More information can be found on our website or a hard copy can be obtained from the office. A re-issue of Statement of Attainment certificates will incur a fee of $30.
For any further information contact Workplace Training Centre. The student information pack can be found on our website or by calling the office and will provide additional information about the course, responsibilities and a copy of the unit of competence.
To enrol or for more information contact us on: Phone: 1300 668 141 Email: [email protected] Web: www.workplacetrainingcentre.edu.au
www.workplacetrainingcentre.edu.au Unit 12 / 70 Holbeche Road Arndell Park NSW 2148
1300 668 141 RTO: 91390 2017.3
[email protected] ABN: 24127418106
Able to produce sufficient identification with name and photo (ie drivers licence, passport etc). Learning outcome On completion of the course, participants will have gained the following skills and knowledge to: Legislative Requirements: WHS, Australian Standards and Codes of Practice Identify confined spaces Planning to work: Hazard management, exposure standards and consultation Following Procedures: Equipment inspections, atmospheric testing, entry permits and reporting Confined Space Entry: Access, egress, height safety, rescue Equipment use: PPE, breathing apparatus, atmospheric monitors, communications Conclude Work: Clean up, inspection, storage and reporting Duration Total duration is 2 days. Training and assessment is conducted on each day. Course Outline Day 1 – Presentation, discussion and confined space entry activities Practical entry exercises, knowledge and practical assessments Day 2 – Presentation, discussion and breathing apparatus activities Practical breathing apparatus exercises, knowledge and practical assessments
Outcome Upon successful completion of the course, a nationally recognised Statement of Attainment RIIWHS202D – Enter and Work in a Confined Space, RIIRIS201D – Conduct Local Risk Control MSMWHS216 – Operate Breathing Apparatus, MSMWHS217 – Gas Test Atmospheres MSMPER200 – Work in accordance with an Issued Permit and a convenient wallet sized card is issued by Workplace Training Centre.
www.workplacetrainingcentre.edu.au Unit 12 / 70 Holbeche Road Arndell Park NSW 2148
1300 668 141 RTO: 91390 2017.3
[email protected] ABN: 24127418106
Location Training can be conducted at Workplace Training Centre’s facilities located in Arndell Park NSW or if required, can also be conducted on your site providing the following requirements are met: Training room with tables, chairs and screen (or blank wall for a projector) Suitable confined space or simulated confined space for practical training Appropriate PPE and equipment for the practical scenarios
Course Sizes Maximum 8 participants Minimum 4 participants for onsite training
Fees and Charges The course fee is $550.00 per person (GST exempt). This fee includes all course materials. Travel and parking costs may apply to onsite training. Please contact us for group training rates. Where Workplace Training Centre receives sufficient notice of cancellation (at least 48 hours), a refund of fees may be available. Cancellations within 48 hours may incur a 20% cancellation fee. No refund is given for non-attendance or cancellation on day of training. More information can be found on our website or a hard copy can be obtained from the office. A re-issue of Statement of Attainment certificates will incur a fee of $30.
For any further information contact Workplace Training Centre. The student information pack can be found on our website or by calling the office and will provide additional information about the course, responsibilities and a copy of the unit of competence.
To enrol or for more information contact us on: Phone: 1300 668 141 Email: [email protected] Web: www.workplacetrainingcentre.edu.au
www.workplacetrainingcentre.edu.au Unit 12 / 70 Holbeche Road Arndell Park NSW 2148
1300 668 141 RTO: 91390 2017.3
[email protected] ABN: 24127418106
