cooper LigHting metaLu - Cooper Industries
COOPER LIGHTING - METALUX
D es c r iption
The CR Series corridor wraparound features economy and energy efficient performance. CR luminaires utilizes a low brightness, extruded acrylic refractor with a heavy gauge end plate with embossed light seal for dependable performance and good looks.
®
Type
Catalog # Project
The CR Series is an ideal complimentary wraparound luminaire for diverse applications requiring economical general lighting.
Date
Comments Prepared by
Spe c ific a tion F ea t u r e s
C on s t r u c t i o n
Ele ctrica l*
Frame/Shielding
Channel and wireway cover/ reflector are die formed code gauge prime cold rolled steel. Numerous KOs for ease of installation. Heavy end plates with 7/8" KO and embossed light seal. Lampholder mounting brackets easily installed with snap-in action. Channel/wireway cover secured with quarter turn fasteners.
Ballasts are CBM/ETL Class “P” and are positively secured by mounting bolts. Pressure lock lampholders. UL/CUL listed. Suitable for damp locations.
Refractor/lens is of clear 100% virgin acrylic full thickness with inside prisms along sides and outside pyramidal prisms on bottom. Lens can be hinged from either side in a lift and shift manner. Optional lens clip included.
Fin ish
Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibitor. Lighting grade, baked white enamel finish.
Note: Lens clips are required in all wall applications and recommended whenever the fixture is subject to vibration.
CR 114T5 214T5 128T5 228T5 154T5 254T5
5-5/16" [135mm] 4-1/4" [108mm]
4-5/8" [118mm]
6-1/8" [156mm]
2', 4' or 8' Surface 1 or 2 Lamp T5
Corridor Wrap
Mo unting D a ta 8' 3/16" [5mm]
15/64" [6mm] K.O. (4) 11/16" x 1" K.O. (2) 7/8" [23mm] K.O. (4) Ceiling Stand-Off Embossments
11/16"[18mm] K.O. (2)
x 3-1/4" K.O. (1) Ground Screw Bump
4-1/4" [108mm] 1-1/8" [29mm]
48" [1220mm] 81" [2058mm] 89-1/2" [2274mm] 91-7/8" [2334mm]
Energy Data
96" [2439mm] Ceiling Stand-Off Embossments Ground Screw Bump 11/16" x 1" K.O. (1) 2'
4-1/4" [108mm]
7/8" [22mm] K.O. (1) Keyhole
1-1/8" [29mm] 8"
8" [203mm] 8-3/4" [222mm]
X
X=4-1/4" 6-1/8" [108mm] [156mm]
16" [406mm]
16" [406mm] 16-1/2" [419mm]
48" [1219mm]
L a m p C onfigur a ti o n s 1 LAMP
4-1/4" [108mm]
Ground Screw Bump
Keyhole
41-1/2" [1054mm]
24" [610mm]
4-5/8" [118mm]
4'
11/16" x 1" K.O. (2) 7/8" [22mm] K.O. (4) Ceiling Stand-Off Embossments
Input Watts: HB Ballast & STD Lamps 114T5 (23) 128T5 (37) 214T5 (34) 228T5 (60) 154T5 (71) 254T5 (114) *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements.
L if t & Shif t Re f ra ct or
2 LAMP
X
4-5/8" [118mm] X=4-1/4" [108mm]
Y 6-1/8" Y=2-5/8" [156mm] [67mm]
Easily Removed. Hinges Either Side (Not Recommended For Sloped Ceiling Applications.)
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of disconnecting power.
Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes.
ADF111021 2014-01-31 08:26:59
CR
Order ing I nfor m a tion SAMPLE NUMBER: CR-228T5-UNV-EBT1-U
Tandem Blank=2'or 4' Length (1) 8T=8' Length One Piece 8' Lens Series CR=Corridor Lite
Ballast Type (2) EBT =T5 Electronic (3) Program Rapid Start. Total Harmonic Distortion < 10%. Standard Ballast Factor=1.0
Number of Lamps (5), (6) (Not Included) 1=1 Lamp 2=2 Lamps
Ballast/FactorType
Wattage 14T5=14W T5 (24") 28T5=28W T5 (48") 54T5=54W T5 (48") Lens A=Acrylic Refractor/Lens Voltage (2) UNV=Universal Voltage 120-277
NOTES: (1)
Length of fixture (2' or 4') determined by lamp wattage chosen. Products also available in non-US voltages and frequencies for international markets. .90 and 1.15 ballast factor available for 2 or 3 14W T5 or 28W T5 lamps only. (4) Step Dimming ballast available for 2 or 3 14WT5 or 28W T5 lamps only. (5) 1-Lamp step dimming ballast in a Normal Ballast factor not available. 2-Lamp ballast will not operate 1-Lamp. (6) 1-Lamp ballast in a High Ballast factor not available. (2) (3)
EBT N=T5 Electronic (3) Program Rapid Start. Total Harmonic Distortion < 10%. Normal Ballast Factor=.90 EBT H=T5 Electronic (3), (6) Program Rapid Start. Total Harmonic Distortion < 10%. High Ballast Factor=1.15 EBT NDIM=T5 Electronic (4), (5) Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, Normal Ballast Factor=.95-1.0 EBT HDIM=T5 Electronic (4) Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, High Ballast Factor=1.15
Packaging U=Unit Pack
ACCESSORIES (Order Separately) SCF=Fixed Stem Set (Specify Length) SCS=Swivel Stem Set (Specify Length) SCA=Adjustable 48" Stem Set A1B/Spacer-U=Spacer 1-1/2" to 2-1/2" from ceiling (Use 2 per fixture) HBAYC-CHAIN/SET/U=(2) V-Hook Hanger, 36" Chain Sets w/S-Hooks GRP-SSF=Gripper Hanger (Use 2 Per Fixture) Additional Accessories Available. See Options and Accessories Section.
Number of Ballasts 1=1 Ballast 2=2 Ballasts
SH IPPING D ATA Catalog No. CR-128T5A 8TCR-128T5A CR-228T5A 8TCR-228T5A
Specifications and dimensions subject to change without notice. Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
Wt. 14 lbs. 24 lbs. 16 lbs. 26 lbs.
ADF111021 2014-01-31 08:26:59
D es c r iption
The CR Series corridor wraparound features economy and energy efficient performance. CR luminaires utilizes a low brightness, extruded acrylic refractor with a heavy gauge end plate with embossed light seal for dependable performance and good looks.
®
Type
Catalog # Project
The CR Series is an ideal complimentary wraparound luminaire for diverse applications requiring economical general lighting.
Date
Comments Prepared by
Spe c ific a tion F ea t u r e s
C on s t r u c t i o n
Ele ctrica l*
Frame/Shielding
Channel and wireway cover/ reflector are die formed code gauge prime cold rolled steel. Numerous KOs for ease of installation. Heavy end plates with 7/8" KO and embossed light seal. Lampholder mounting brackets easily installed with snap-in action. Channel/wireway cover secured with quarter turn fasteners.
Ballasts are CBM/ETL Class “P” and are positively secured by mounting bolts. Pressure lock lampholders. UL/CUL listed. Suitable for damp locations.
Refractor/lens is of clear 100% virgin acrylic full thickness with inside prisms along sides and outside pyramidal prisms on bottom. Lens can be hinged from either side in a lift and shift manner. Optional lens clip included.
Fin ish
Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibitor. Lighting grade, baked white enamel finish.
Note: Lens clips are required in all wall applications and recommended whenever the fixture is subject to vibration.
CR 114T5 214T5 128T5 228T5 154T5 254T5
5-5/16" [135mm] 4-1/4" [108mm]
4-5/8" [118mm]
6-1/8" [156mm]
2', 4' or 8' Surface 1 or 2 Lamp T5
Corridor Wrap
Mo unting D a ta 8' 3/16" [5mm]
15/64" [6mm] K.O. (4) 11/16" x 1" K.O. (2) 7/8" [23mm] K.O. (4) Ceiling Stand-Off Embossments
11/16"[18mm] K.O. (2)
x 3-1/4" K.O. (1) Ground Screw Bump
4-1/4" [108mm] 1-1/8" [29mm]
48" [1220mm] 81" [2058mm] 89-1/2" [2274mm] 91-7/8" [2334mm]
Energy Data
96" [2439mm] Ceiling Stand-Off Embossments Ground Screw Bump 11/16" x 1" K.O. (1) 2'
4-1/4" [108mm]
7/8" [22mm] K.O. (1) Keyhole
1-1/8" [29mm] 8"
8" [203mm] 8-3/4" [222mm]
X
X=4-1/4" 6-1/8" [108mm] [156mm]
16" [406mm]
16" [406mm] 16-1/2" [419mm]
48" [1219mm]
L a m p C onfigur a ti o n s 1 LAMP
4-1/4" [108mm]
Ground Screw Bump
Keyhole
41-1/2" [1054mm]
24" [610mm]
4-5/8" [118mm]
4'
11/16" x 1" K.O. (2) 7/8" [22mm] K.O. (4) Ceiling Stand-Off Embossments
Input Watts: HB Ballast & STD Lamps 114T5 (23) 128T5 (37) 214T5 (34) 228T5 (60) 154T5 (71) 254T5 (114) *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements.
L if t & Shif t Re f ra ct or
2 LAMP
X
4-5/8" [118mm] X=4-1/4" [108mm]
Y 6-1/8" Y=2-5/8" [156mm] [67mm]
Easily Removed. Hinges Either Side (Not Recommended For Sloped Ceiling Applications.)
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of disconnecting power.
Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes.
ADF111021 2014-01-31 08:26:59
CR
Order ing I nfor m a tion SAMPLE NUMBER: CR-228T5-UNV-EBT1-U
Tandem Blank=2'or 4' Length (1) 8T=8' Length One Piece 8' Lens Series CR=Corridor Lite
Ballast Type (2) EBT =T5 Electronic (3) Program Rapid Start. Total Harmonic Distortion < 10%. Standard Ballast Factor=1.0
Number of Lamps (5), (6) (Not Included) 1=1 Lamp 2=2 Lamps
Ballast/FactorType
Wattage 14T5=14W T5 (24") 28T5=28W T5 (48") 54T5=54W T5 (48") Lens A=Acrylic Refractor/Lens Voltage (2) UNV=Universal Voltage 120-277
NOTES: (1)
Length of fixture (2' or 4') determined by lamp wattage chosen. Products also available in non-US voltages and frequencies for international markets. .90 and 1.15 ballast factor available for 2 or 3 14W T5 or 28W T5 lamps only. (4) Step Dimming ballast available for 2 or 3 14WT5 or 28W T5 lamps only. (5) 1-Lamp step dimming ballast in a Normal Ballast factor not available. 2-Lamp ballast will not operate 1-Lamp. (6) 1-Lamp ballast in a High Ballast factor not available. (2) (3)
EBT N=T5 Electronic (3) Program Rapid Start. Total Harmonic Distortion < 10%. Normal Ballast Factor=.90 EBT H=T5 Electronic (3), (6) Program Rapid Start. Total Harmonic Distortion < 10%. High Ballast Factor=1.15 EBT NDIM=T5 Electronic (4), (5) Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, Normal Ballast Factor=.95-1.0 EBT HDIM=T5 Electronic (4) Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, High Ballast Factor=1.15
Packaging U=Unit Pack
ACCESSORIES (Order Separately) SCF=Fixed Stem Set (Specify Length) SCS=Swivel Stem Set (Specify Length) SCA=Adjustable 48" Stem Set A1B/Spacer-U=Spacer 1-1/2" to 2-1/2" from ceiling (Use 2 per fixture) HBAYC-CHAIN/SET/U=(2) V-Hook Hanger, 36" Chain Sets w/S-Hooks GRP-SSF=Gripper Hanger (Use 2 Per Fixture) Additional Accessories Available. See Options and Accessories Section.
Number of Ballasts 1=1 Ballast 2=2 Ballasts
SH IPPING D ATA Catalog No. CR-128T5A 8TCR-128T5A CR-228T5A 8TCR-228T5A
Specifications and dimensions subject to change without notice. Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
Wt. 14 lbs. 24 lbs. 16 lbs. 26 lbs.
ADF111021 2014-01-31 08:26:59
