Day 1: Distress Paint Distress Paint Marbling Technique
1
Day 1: Distress Paint Distress Paint Marbling Technique Steps: 1. Shake Distress Paint and apply various colors to Craft Sheet. 2. Mist Paint with water from Mister. 3. Swipe tag through Paints several times until covered. 4. Mist painted tag with water to blend and marblize. 5. Dry with Heat Tool. *Note: Once Distress Paints are dry they are permanent and will no longer blend.
Supplies: Craft Sheet (SSS)
Mister (SSS)
Heat Tool (SSS)
Tags/Manila (SSS)
Distress Paint (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
2
Colored Crackle Technique Steps: 1. Paint porous surface with medium layer of Rock Candy Distress Crackle Paint. 2. Allow Crackle Paint to dry and crack completely. 3. Paint over crackled surface with colors of Distress Paint. 4. Mist paint with water to blend color if needed. 5. Dry with Heat Tool.
Supplies: Craft Sheet (SSS)
Mister (SSS)
Distress Paint (SSS)
Tags/Manila (SSS)
Distress Clear Rock Candy Crackle Paint (SSS)
Grungeboard or Chipboard (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
3
Altered Surface Technique Steps: 1. Paint non-porous surface with Distress Paint. 2. Dry Paint with Heat Tool and watch finish change from shiny to matte. 3. With some areas of paint still shiny, wipe surface with towel. 4. Repeat above steps with additional layers of color if desired. *Note: This technique works best on a non-porous surface, however you can also begin with a base layer of Distress Paint on porous surfaces.
Supplies: Craft Sheet (SSS)
Idea-ology Alpha Parts (SSS)
Heat Tool (SSS)
Assorted Idea-ology Metal Charms or Findings (SSS)
Distress Paint (SSS)
Tags/Manila (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
4
Eroded Metallic Technique Steps: 1. Apply various colors of Distress Paint to tag. 2. Blend color with Ink Blending Tool and let dry. 3. Quickly apply a layer of Metallic Distress Paint over entire tag. 4. Immediately spritz and flick water droplets over wet paint. 5. Dry tag with Heat Tool watching the surface around the water. 6. Place a paper towel over the entire tag absorbing the water/wet paint. 7. Immediately peel towel off to reveal surface. 8. Ink tag with Distress Ink using an Ink Blending Tool.
Supplies: Craft Sheet (SSS)
Mister (SSS)
Heat Tool (SSS)
Ink Blending Tool (SSS)
Distress Paint – including Antique Bronze Metallic (SSS)
Ink Blending Foam (SSS) Tags/Manila (SSS)
Distress Ink (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
5
Stamping Resist Technique Steps: 1. Apply Distress Paint on to stamp by swiping across stamp. 2. Immediately stamp on to porous surface by lightly pressing down. 3. Clean paint off stamp immediately while paint is wet. 4. Let paint dry on tag or dry with Heat Tool. 5. Ink over stamped image with Distress Ink using Ink Blending Tool or Distress Stain. (Paint will resist either water-based dye ink) 6. Lightly mist paper towel with water and wipe over stamped image to reveal true paint color if desired.
Supplies: Craft Sheet (SSS)
Mister (SSS)
Heat Tool (SSS)
Ink Blending Tool (SSS)
Distress Paint (SSS)
Ink Blending Foam (SSS)
Distress Ink (SSS)
Stamps/Rubber or Clear (SSS)
Distress Reinker (SSS)
Grid Blocks (SSS)
Distress Stains (SSS)
Tags/Manila (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
6
Industrial Technique Steps: 1. Apply Metal Foil Tape to tag. (*option: you can use Foil Cardstock instead) 2. Emboss a texture using an embossing folder. 3. Paint over embossed surface with Black Soot Distress Paint using Ink Blending Tool to work paint into the recessed area. 4. While paint is still wet, wipe away excess with paper towel. 5. Let dry once desired look is achieved. 6. Apply Metal Foil Tape to tag. (*option: you can use Foil Cardstock Supplies:
Supplies: Craft Sheet (SSS)
Foil Cardstock (SSS)
Distress Paint (SSS)
Texture Fades (SSS)
Ink Blending Tool (SSS)
Vagabond Machine (SSS)
Ink Blending Foam (SSS)
Tags/Manila (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
Distress Paint Marbling: 1. Shake Distress Paint and apply various colors to Craft Sheet. 2. Mist Paint with water from Mister. 3. Swipe tag through Paints several times until covered. 4. Mist painted tag with water to blend and marblize. 5. Dry with Heat Tool. *Note: Once Distress Paints are dry they are permanent and will no longer blend. 102-DAY1
Eroded Metallic:
1. Apply various colors of Distress Paint to tag. 2. Blend color with Ink Blending Tool and let dry. 3. Quickly apply a layer of Metallic Distress Paint over entire tag. 4. Immediately spritz and flick water droplets over wet paint. 5. Dry tag with Heat Tool watching the surface around the water. 6. Place a paper towel over the entire tag absorbing the water/wet paint. 7. Immediately peel towel off to reveal surface. 8. Ink tag with Distress Ink using an Ink Blending Tool.
102-DAY1
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
Colored Crackle: 1. Paint porous surface with medium layer of Rock Candy Distress Crackle Paint. 2. Allow Crackle Paint to dry and crack completely. 3. Paint over crackled surface with colors of Distress Paint. 4. Mist paint with water to blend color if needed. 5. Dry with Heat Tool. 102-DAY1
Stamping Resist: 1. Apply Distress Paint onto stamp by swiping across stamp. 2. Immediately stamp on to porous surface by lightly pressing down. 3. Clean paint off stamp immediately while paint is wet. 4. Let paint dry on tag or dry with Heat Tool. 5. Ink over stamped image with Distress Ink using Ink Blending Tool or Distress Stain. (Paint will resist either water-based dye ink) 6. Lightly mist paper towel with water and wipe over stamped image to reveal true paint color if desired.
102-DAY1
Altered Surface: 1. Paint non-porous surface with Distress Paint. 2. Dry Paint with Heat Tool and watch finish change from shiny to matte. 3. With some areas of paint still shiny, wipe surface with towel. 4. Repeat above steps with additional layers of color if desired. *Note: This technique works best on a non-porous surface, however you can also begin with a base layer of Distress Paint on porous surfaces. 102-DAY1
Industrial: 1. Apply Metal Foil Tape to tag. (*option: you can use Foil Cardstock instead) 2. Emboss a texture using an embossing folder. 3. Paint over embossed surface with Black Soot Distress Paint using Ink Blending Tool to work paint into the recessed area. 4. While paint is still wet, wipe away excess with paper towel. 5. Let dry once desired look is achieved.
102-DAY1
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
Big n' Bossy™ Clear
Perfect Pearls Mist
Perfect Medium™ Clear
Watermark/Resist
Liquid Pearls™
Vintaj™ Patinas
Melt Art™ Heat it Inks
Dylusions Ink Sprays
Distress Crackle Paint
Distress Embossing Ink Stamp Pad
Distress Stain
Distress Paint
Distress Markers
Distress Ink Dye Stamp Pads and Reinkers
Claudine Hellmuth Studio Acrylic Paints
Adirondack® Metallic Mixatives™
Adirondack® Alcohol Blending Solution
Adirondack® Alcohol Inks™
Adirondack® Color Wash™
Adirondack® Acrylic Paint Dabbers
Adirondack® Dye Lights/Brights/Earthtones
Adirondack® Pigment Ink Pad Lights/Brights/Earthtones
Archival™ Dye Ink Stamp Pad
DESCRIPTION
Inks, Paints & Mediums DYE
PIGMENT
NO COLOR
TRANSLUCENT
OPAQUE
SOLVENT
OIL
ACRYLIC
ACRYLIC
ACRYLIC
ACRYLIC
ACRYLIC
WATER
DESCRIPTION
Inks, Paints & Mediums DYE
PIGMENT
NO COLOR
TRANSLUCENT
OPAQUE
SOLVENT
OIL
WATER
Day 1: Distress Paint Distress Paint Marbling Technique Steps: 1. Shake Distress Paint and apply various colors to Craft Sheet. 2. Mist Paint with water from Mister. 3. Swipe tag through Paints several times until covered. 4. Mist painted tag with water to blend and marblize. 5. Dry with Heat Tool. *Note: Once Distress Paints are dry they are permanent and will no longer blend.
Supplies: Craft Sheet (SSS)
Mister (SSS)
Heat Tool (SSS)
Tags/Manila (SSS)
Distress Paint (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
2
Colored Crackle Technique Steps: 1. Paint porous surface with medium layer of Rock Candy Distress Crackle Paint. 2. Allow Crackle Paint to dry and crack completely. 3. Paint over crackled surface with colors of Distress Paint. 4. Mist paint with water to blend color if needed. 5. Dry with Heat Tool.
Supplies: Craft Sheet (SSS)
Mister (SSS)
Distress Paint (SSS)
Tags/Manila (SSS)
Distress Clear Rock Candy Crackle Paint (SSS)
Grungeboard or Chipboard (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
3
Altered Surface Technique Steps: 1. Paint non-porous surface with Distress Paint. 2. Dry Paint with Heat Tool and watch finish change from shiny to matte. 3. With some areas of paint still shiny, wipe surface with towel. 4. Repeat above steps with additional layers of color if desired. *Note: This technique works best on a non-porous surface, however you can also begin with a base layer of Distress Paint on porous surfaces.
Supplies: Craft Sheet (SSS)
Idea-ology Alpha Parts (SSS)
Heat Tool (SSS)
Assorted Idea-ology Metal Charms or Findings (SSS)
Distress Paint (SSS)
Tags/Manila (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
4
Eroded Metallic Technique Steps: 1. Apply various colors of Distress Paint to tag. 2. Blend color with Ink Blending Tool and let dry. 3. Quickly apply a layer of Metallic Distress Paint over entire tag. 4. Immediately spritz and flick water droplets over wet paint. 5. Dry tag with Heat Tool watching the surface around the water. 6. Place a paper towel over the entire tag absorbing the water/wet paint. 7. Immediately peel towel off to reveal surface. 8. Ink tag with Distress Ink using an Ink Blending Tool.
Supplies: Craft Sheet (SSS)
Mister (SSS)
Heat Tool (SSS)
Ink Blending Tool (SSS)
Distress Paint – including Antique Bronze Metallic (SSS)
Ink Blending Foam (SSS) Tags/Manila (SSS)
Distress Ink (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
5
Stamping Resist Technique Steps: 1. Apply Distress Paint on to stamp by swiping across stamp. 2. Immediately stamp on to porous surface by lightly pressing down. 3. Clean paint off stamp immediately while paint is wet. 4. Let paint dry on tag or dry with Heat Tool. 5. Ink over stamped image with Distress Ink using Ink Blending Tool or Distress Stain. (Paint will resist either water-based dye ink) 6. Lightly mist paper towel with water and wipe over stamped image to reveal true paint color if desired.
Supplies: Craft Sheet (SSS)
Mister (SSS)
Heat Tool (SSS)
Ink Blending Tool (SSS)
Distress Paint (SSS)
Ink Blending Foam (SSS)
Distress Ink (SSS)
Stamps/Rubber or Clear (SSS)
Distress Reinker (SSS)
Grid Blocks (SSS)
Distress Stains (SSS)
Tags/Manila (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
6
Industrial Technique Steps: 1. Apply Metal Foil Tape to tag. (*option: you can use Foil Cardstock instead) 2. Emboss a texture using an embossing folder. 3. Paint over embossed surface with Black Soot Distress Paint using Ink Blending Tool to work paint into the recessed area. 4. While paint is still wet, wipe away excess with paper towel. 5. Let dry once desired look is achieved. 6. Apply Metal Foil Tape to tag. (*option: you can use Foil Cardstock Supplies:
Supplies: Craft Sheet (SSS)
Foil Cardstock (SSS)
Distress Paint (SSS)
Texture Fades (SSS)
Ink Blending Tool (SSS)
Vagabond Machine (SSS)
Ink Blending Foam (SSS)
Tags/Manila (SSS)
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
Distress Paint Marbling: 1. Shake Distress Paint and apply various colors to Craft Sheet. 2. Mist Paint with water from Mister. 3. Swipe tag through Paints several times until covered. 4. Mist painted tag with water to blend and marblize. 5. Dry with Heat Tool. *Note: Once Distress Paints are dry they are permanent and will no longer blend. 102-DAY1
Eroded Metallic:
1. Apply various colors of Distress Paint to tag. 2. Blend color with Ink Blending Tool and let dry. 3. Quickly apply a layer of Metallic Distress Paint over entire tag. 4. Immediately spritz and flick water droplets over wet paint. 5. Dry tag with Heat Tool watching the surface around the water. 6. Place a paper towel over the entire tag absorbing the water/wet paint. 7. Immediately peel towel off to reveal surface. 8. Ink tag with Distress Ink using an Ink Blending Tool.
102-DAY1
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
Colored Crackle: 1. Paint porous surface with medium layer of Rock Candy Distress Crackle Paint. 2. Allow Crackle Paint to dry and crack completely. 3. Paint over crackled surface with colors of Distress Paint. 4. Mist paint with water to blend color if needed. 5. Dry with Heat Tool. 102-DAY1
Stamping Resist: 1. Apply Distress Paint onto stamp by swiping across stamp. 2. Immediately stamp on to porous surface by lightly pressing down. 3. Clean paint off stamp immediately while paint is wet. 4. Let paint dry on tag or dry with Heat Tool. 5. Ink over stamped image with Distress Ink using Ink Blending Tool or Distress Stain. (Paint will resist either water-based dye ink) 6. Lightly mist paper towel with water and wipe over stamped image to reveal true paint color if desired.
102-DAY1
Altered Surface: 1. Paint non-porous surface with Distress Paint. 2. Dry Paint with Heat Tool and watch finish change from shiny to matte. 3. With some areas of paint still shiny, wipe surface with towel. 4. Repeat above steps with additional layers of color if desired. *Note: This technique works best on a non-porous surface, however you can also begin with a base layer of Distress Paint on porous surfaces. 102-DAY1
Industrial: 1. Apply Metal Foil Tape to tag. (*option: you can use Foil Cardstock instead) 2. Emboss a texture using an embossing folder. 3. Paint over embossed surface with Black Soot Distress Paint using Ink Blending Tool to work paint into the recessed area. 4. While paint is still wet, wipe away excess with paper towel. 5. Let dry once desired look is achieved.
102-DAY1
Copyright © 2013 Online Card Classes, LLC. All rights reserved.
Big n' Bossy™ Clear
Perfect Pearls Mist
Perfect Medium™ Clear
Watermark/Resist
Liquid Pearls™
Vintaj™ Patinas
Melt Art™ Heat it Inks
Dylusions Ink Sprays
Distress Crackle Paint
Distress Embossing Ink Stamp Pad
Distress Stain
Distress Paint
Distress Markers
Distress Ink Dye Stamp Pads and Reinkers
Claudine Hellmuth Studio Acrylic Paints
Adirondack® Metallic Mixatives™
Adirondack® Alcohol Blending Solution
Adirondack® Alcohol Inks™
Adirondack® Color Wash™
Adirondack® Acrylic Paint Dabbers
Adirondack® Dye Lights/Brights/Earthtones
Adirondack® Pigment Ink Pad Lights/Brights/Earthtones
Archival™ Dye Ink Stamp Pad
DESCRIPTION
Inks, Paints & Mediums DYE
PIGMENT
NO COLOR
TRANSLUCENT
OPAQUE
SOLVENT
OIL
ACRYLIC
ACRYLIC
ACRYLIC
ACRYLIC
ACRYLIC
WATER
DESCRIPTION
Inks, Paints & Mediums DYE
PIGMENT
NO COLOR
TRANSLUCENT
OPAQUE
SOLVENT
OIL
WATER
