Dell OptiPlex GX260 RAM Replacement

Dell OptiPlex GX260 RAM Replacement

Dell OptiPlex GX260 RAM Replacement This guide will show you how to remove the RAM.

Written By: Kevin Schapansky

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Dell OptiPlex GX260 RAM Replacement

INTRODUCTION This computer can either use DDR 333 or DDR 400 memory, and can take up to 2GB of memory according to Dell

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Dell OptiPlex GX260 RAM Replacement

Step 1 — Case



Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.



Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.

 Note: Some force may be required to push in the oval buttons open the PC case.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Dell OptiPlex GX260 RAM Replacement

Step 2 — RAM



Push out on the cream colored tabs on each side of each RAM module until it pops up and out of its slot and remove the RAM.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 10:22:31 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4