Dell Optiplex SX280 RAM Replacement

Report 0 Downloads 315 Views
Dell Optiplex SX280 RAM Replacement

Dell Optiplex SX280 RAM Replacement RAM cards removed from computer.

Written By: Wyatt

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Dell Optiplex SX280 RAM Replacement

INTRODUCTION Replace the old RAM cards to greatly enhance computer speed.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Dell Optiplex SX280 RAM Replacement

Step 1 — Panel Cover

 Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

 Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

Step 2



Lay the computer on its side; you will see a blue knob.



Turn this knob 90 deg clockwise.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Dell Optiplex SX280 RAM Replacement

Step 3



Slide the panel case forward about 1/2 inch while knob is turned.



Lift panel case off computer.

Step 4 — RAM

© iFixit — CC BY-NC-SA

www.iFixit.com



The RAM are the two green cards in the corner of the computer.



At each end of the card, there are two white clips securing the RAM to the Motherboard.

Page 4 of 5

Dell Optiplex SX280 RAM Replacement

Step 5



Push down both white clips with your thumbs until you hear a click.



The RAM cards can now be removed.

To reassemble your device, follow these instructions (steps 1-3) in reverse order. This document was last generated on 2017-07-02 08:59:00 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5