Detailed Curiosity Model (Large) - Build Instructions - Thingiverse
Curiosity Rover 3D Printed Model
CURIOSITY ROVER 3D PRINTED MODEL
Parts List: FILE NAME 6mm-pin.stl body.stl tire.stl wheel.stl lower-suspension-p1-left.stl lower-suspension-p1-right.stl lower-suspension-p2-left.stl lower-suspension-p2-right.stl upper-suspension-p1-left.stl upper-suspension-p1-right.stl upper-suspension-p2-left.stl upper-suspension-p2-right.stl mounting-bracket.stl steering-bracket.stl swivel-bracket.stl swivel.stl upper-arm.stl lower-arm.stl mahli-apxs.stl chemcam.stl
QTY NEEDED 17 1 6 6 1 1 1 1 1 1 1 1 2 4 1 1 1 1 1 1
This project is designed for printing on a FFF (FDM) desktop 3D printer. The estimated printing time is 11 hours. The largest component is the body, which requires a print bed of 6 x 3.75 inches wide.
Some components have support tabs to secure the part during printing. These tabs should be torn away before assembling the model.
wheel.stl
swivel-bracket.stl 6mm-pin.stl
removable support tabs
page 2/3
Assembly: 1.) WHEEL ASSEMBLY 2.) SUSPENSION ASSEMBLY
wheel.stl tire.stl
note: the right side assembly is the same but with mirrored components upper-suspension-p1-left.stl upper-suspension-p2-left.stl
note: align slot in wheel with “JPL” on tire
mounting-bracket.stl
steering-bracket.stl 6mm-pin.stl lower-suspension-p1-left.stl lower-suspension-p2-left.stl
3.) ROBOTIC ARM ASSEMBLY
mahli-apxs.stl upper-arm.stl
lower-arm.stl
swivel.stl swivel-bracket.stl
4.) CHEMCAM AND ROVER ASSEMBLY chemcam.stl body.stl
TOP VIEW
FRONT VIEW
SIDE VIEW
page 3/3
CURIOSITY ROVER 3D PRINTED MODEL
Parts List: FILE NAME 6mm-pin.stl body.stl tire.stl wheel.stl lower-suspension-p1-left.stl lower-suspension-p1-right.stl lower-suspension-p2-left.stl lower-suspension-p2-right.stl upper-suspension-p1-left.stl upper-suspension-p1-right.stl upper-suspension-p2-left.stl upper-suspension-p2-right.stl mounting-bracket.stl steering-bracket.stl swivel-bracket.stl swivel.stl upper-arm.stl lower-arm.stl mahli-apxs.stl chemcam.stl
QTY NEEDED 17 1 6 6 1 1 1 1 1 1 1 1 2 4 1 1 1 1 1 1
This project is designed for printing on a FFF (FDM) desktop 3D printer. The estimated printing time is 11 hours. The largest component is the body, which requires a print bed of 6 x 3.75 inches wide.
Some components have support tabs to secure the part during printing. These tabs should be torn away before assembling the model.
wheel.stl
swivel-bracket.stl 6mm-pin.stl
removable support tabs
page 2/3
Assembly: 1.) WHEEL ASSEMBLY 2.) SUSPENSION ASSEMBLY
wheel.stl tire.stl
note: the right side assembly is the same but with mirrored components upper-suspension-p1-left.stl upper-suspension-p2-left.stl
note: align slot in wheel with “JPL” on tire
mounting-bracket.stl
steering-bracket.stl 6mm-pin.stl lower-suspension-p1-left.stl lower-suspension-p2-left.stl
3.) ROBOTIC ARM ASSEMBLY
mahli-apxs.stl upper-arm.stl
lower-arm.stl
swivel.stl swivel-bracket.stl
4.) CHEMCAM AND ROVER ASSEMBLY chemcam.stl body.stl
TOP VIEW
FRONT VIEW
SIDE VIEW
page 3/3
